tomqvaxy 0 Posted March 30, 2020 Report Share Posted March 30, 2020 anyone have a favorite soldering iron with an on/ off switch? under 75 watts is fine - to be used for model electronics. a "soldering station" would also work; I just want an "off" feature. (110v - US mains) thanks Link to post Share on other sites
Nick Filippone 114 Posted March 30, 2020 Report Share Posted March 30, 2020 You can buy a foot operated switch into which you can plug any electrical device and - “voila” - a pedal operated on-off switch. I started using it when I grew tired of having to put down either my airbrush or the model when painting in order to start or stop my compressor. Nick Link to post Share on other sites
PeteJ 176 Posted March 30, 2020 Report Share Posted March 30, 2020 If you want a great tool that is going to last forever buy an American Beauty. They have been doing this forever and a quality industrial machine isn't all that expensive. https://americanbeautytools.com/Soldering-Irons Link to post Share on other sites
nmertes 15 Posted March 31, 2020 Report Share Posted March 31, 2020 I've had a Weller NE1010NA that I purchased from Amazon 2 years ago along with a set of tips that included a couple very fine screwdriver tips. I've owned a couple Weller's over the years & always found them dependable. Link to post Share on other sites
Mister300 9 Posted March 31, 2020 Report Share Posted March 31, 2020 https://www.amazon.com/Hakko-FX888D29BY-ESD-Safe-Digital-Soldering/dp/B00OSM27T8/ref=sr_1_5?keywords=hakko&qid=1585680150&sr=8-5 We use this one for our business, be careful if price is too low (ebay) it is a counterfeit station. Yes these are so high quality they are counterfeited alot in the marketplace. We got ours locally through an industrial electronics store. Link to post Share on other sites
Ralph Nardone 72 Posted April 1, 2020 Report Share Posted April 1, 2020 +1 on the Hakko unit. I've worked corporate jet avionics for 30+ years, and most shops I've worked for either had them or upgraded to them--they are of a much better quality than a comparable Weller unit. Link to post Share on other sites
tomqvaxy 0 Posted April 1, 2020 Author Report Share Posted April 1, 2020 impressive endorsements for such a moderately priced unit. I like it and the American beauty model here: https://www.amazon.com/dp/B007S20H0Q/?coliid=I1846ADLBVCWM0&colid=FEDCRO6LYELH&psc=1&ref_=lv_ov_lig_dp_it i'm not getting hobby time for a couple of months so I have time to cogitate for a bit, as well as save my pennies! thanks for all the inputs. Link to post Share on other sites
Mister300 9 Posted April 1, 2020 Report Share Posted April 1, 2020 (edited) The Hakko has a huge line of replacement tips with specialized shapes and sizes and it heats instantly. Here is the owners manualSoldering instructions.pdf Manual has part level troubleshooting and replacement part list for everything built into the station. Not engineered to be a throwaway tool. Edited April 1, 2020 by Mister300 Link to post Share on other sites
Recommended Posts