Jump to content

catdude01

Member
  • Posts

    213
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by catdude01

  1. wonderful progress so far, I like the stowage and the tarps.
  2. looking great, keep the good work. 👌
  3. fantastic progress, love the quality of the details. 😀
  4. So on this final animation you can see the whole process in seconds to the final stage. Hope you like it and can help you work on yours! I added some 50mm caliber ammo cases around the turret to add more realism.
  5. Well this fella has come to the finish line, Dust and mud added, figure done, lens lights added using Sticko silver dots, stowage is handmade using Aves Epoxy, just need to add a rope and some loose tools. Hope you like it, its a great kit considering the old it is.
  6. Thank you! its a learning process with this subject.So far I'm very pleased with the results.
  7. Some progress on the Sherman, started the Fading process using oils. I used some blue oils for the shadows and some yellows for the highlights. I Blend the yellows and the blues separated from each other and here you can see the results.
  8. here is with the markings done using template from Lion Roar WWII US Vehicles Markings 1. First time using it and I must say I love the results.
  9. Sherman WIP: first a filter using model master sand, then another filter using burnt umber. Last a wash using mig brown for dark green and a pin wash using PLW black night. the real deal comes when you start doing the green color. You have to switch your mind to paint like you were using water colors looking for transparent results, so the previous work can be shown between the layers. Yes you eventually will need to retouch some of the work, but you have the advantage that you can see where exactly. In my case was minimal . I just sealed again the work for the decals process, meanwhile I can start painting the tools and all the small parts that were left out of the big painting process.
  10. I sealed again the kit with satin varnish and leave it to rest for 24 hours, so while this goes on, Here I share another Gif showing the steps of the tank in black and white but now showing the first step with colors.
  11. progress, 2 layers of faded olive drab using a mix of tamiya olive drab and dark yellow. On a closer look you can see the details done in black & white showing between the layers.
  12. I make this gif file so you can see more clearly the progress between the Black & White steps.
  13. Step 4 of the black & white modulation. Added some chipping, scratches and darker glazes and pinwashes and a more dark weathering.
  14. Step 3 of the Black & White Modulation adding glazes of Black, pin washes to underlines lines, holes, etc. Some pre weathering also started.
  15. Step two of the Black & White modulation continues with detailing white parts using a brush with Vallejo white. Look how the parts painted in brush pop out of the kit!
  16. The fun part begins, using black and white from Tamiya, the step 1 of the black & white modulation.
  17. The next day, after sanding the lines in the turret and make some texture on it using the Tamiya thin glue (melting the plastic surface and making texture using a brush with stiff bristles.) Primer was applied using a can from Walmart. Also the figure was base painted using vallejo colors.
  18. Hi Fellas: Tamiya oooooooooold really old Sherman M4A3 105 mm Howitzer just for the fun of it. Lot of stuff can be done to correct here and there, adding PE, changing wheels for AFV, and hull from Italeri, etc..but forget it, this is a build to have fun, so is going out of the box, except for the metal barrel of course. Here was my start during the spare time in the week. The kit is done in a few hours.
  19. Thank you guys, glad that you like it. 😃
  20. Thank you guys, glad that everyone like it. 😃
  21. The M561 Gama Goat was seven years in development until production of the vehicle began in 1968. Its unique name was derived from the creator of its articulated joint, Roger Gamaunt, and its mountain goat-like climbing ability. It was unlike most other military off-road vehicles in that power could go to all 6 wheels of the vehicle, and its aforementioned articulated joint allowed 80˚ pitch and 60˚ roll ranges of the carrier module at the rear. Its excellent rough-terrain mobility was tempered somewhat by problems with tricky handling and maintenance, as well as it being rather noisy, but the Gama Goat continued in service until it was effectively replaced by the HMMWV in the late 1980s. On this occasion, a Tamiya jewel fell into my hands, something different from the usual thing that we hope to see as tanks or cars, the 6×6 M561 Gamma Goat vehicle. It is an uncommon vehicle but easy mount and can be achieved in a weekend. The version that interests me to mount is one already in civil hands that I saw on the internet in a shade of pale yellow. I decided on a base with a semi-vertical section made of paper and plasticine. The construction of the model only took a few hours, which advanced the painting work, achieved on this occasion using Mission Models paints for the base yellow color. The wheels and rims were painted in Tamiya colors and the effects of gasoline, soil, and mud were achieved with Mig Jimenez AMMO products. Replace the headlights of the model, with the product of Sticko, Silver round Dots, which gives a bright touch to the lights and create a more striking effect than those brought by the model. To achieve the pose in the base, I prepared the base with the wet plasticine which covered with clear food wrapping and presses the wheels of the model to ensure its position in the base after drying. After drying, the base was covered with white glue and very fine sand to create the texture. Then the base was painted with Tamiya paint and some bushes were placed as a final touch. The model is placed on the base in the pre-printed footprints in previous steps fixing it with super glue. The whole process took a weekend only and it was a very fun kit to work with.
  22. I got this kit on a raffle in a scale model show a few years ago, and after a quick inspection, I put it in a box and forget about it. The mold is only 64 years old! the quality is ugly by modern standards. Although the level of details is decent, you will find huge fitting issues, ejector marks everywhere so I recommend studying very well the parts before assembly if you are up to the challenge. Been saying that, I wanted to make something special from this kit, also different from everything else. I looked for similar tug boats in the tropic zone, like Puerto Rico, Cuba, and the Dominican Republic for inspiration. I also named it after someone very special in my life. Building the Kit After inspecting the plastic sprues, decals, and references, I started sanding almost everything, lots of sanding and a lot of putty for the hull and the boat frame. Pinholes were removed or sealed with putty, except a round of them in the railing side of the boat. I solve the problem using a plastic sheet to cover them. The kit brought some simulate ropes for the sides of the boat, something often used in the 40s and 50s, so I needed a modern solution using rubber tires, but on that scale is a tricky one. My solution came in a weekend play with my kids using a product that is available almost everywhere called “WATER BALLOONS – BUNCH OF BALLOONS RAPID REFILL”. the balloons came with a rubber ring that after cutting simulate perfectly a rubber tire!. For the windows, I use a clear plastic film from a Pasta box glued using the clear glue from Testor. After that, a lot of test fitting is required to make sure the boat hull and tower house fit perfectly in place before starting painting. The painting was done in stages, first the hull using Tamiya Red Hull as a primer, and later adding some orange and red to get the correct mix. The upper area of the hull was painted in white and sky blue. The Boathouse was also painted in white with all floors in gray. I weathered the blue paint of the hull using my airbrush with Tamiya flat white thinned and the red hull was retouched with a mist of light green to simulate algae accumulation. I decided to give a unique touch, and painted the boat’s bridge with a flag from my country (Puerto Rico) and named the ship by my wife’s name. I used different types of cord rope for the details on the lifeboat, rubber tires, and the poles. The final touch was to use a Silver dot from Sticko to simulate the searchlight on top of the bridge’s roof.
  23. Hello! You can still see the pictures in my original post in our club site, click here: https://www.ipmsborinqueneers.com/apps/forums/topics/show/12909802-tamiya-1-35-horch1a-with-2cm-flak38
  24. Wonderful Work, love the upgrade armor!
×
×
  • Create New...