All Activity

Nice work!

Looks terrific!

That is one busy workshop. I did the Olympia a while back. It's a very old kit but was a fun build and makes a nice "mantle model" over a fireplace or on a decorator shelf.

Excellent job. When I do carrier models it takes me as long to do the air wing as it does the ship.

This month I was able to finally get another Shelf Queen off the Shelf of Doom. Three years after it was started, the 1/600 scale Academy USS Enterprise was launched: Now she's off for her shakedown cruise. Thank you all for looking in, comments are welcome.

It's July now and Happy Birthday America and Happy Anniversary to me. It's time for another tour of Maddog Manufacturing so all aboard the trams to see what's happening now. Our first stop is the Hangar which only had one project going this time, but it's a big one! I got started on the AN-225 transport, starting with assembling some of the wheels: Granted that's about 1/5th of the wheels this beastie has, and each wheel consists of five parts. I'll be working through these gradually as this progresses. Next I started with the main landing gear bay. The first part was easy: After that, every landing gear assembly needed to be built and installed one at a time. Each landing gear sub-assembly has 17 parts in each one and there are two types of main landing gear. Here's the first one installed into place: Later I got the rest of this first type of landing gear installed. This is still only one-third of the total landing gear assemblies: Once that was sufficiently dry, I installed two of the second type of landing gear to get them started: After that I got tired of dealing with all those tiny detail parts. So, I started on the engines, each of which had over twenty parts. I finally got all six of them finished and worked on their pylons next: After some more sanding and finagling, I got all six engines mounted on their pylons: After that I decided to start on the tail, cementing the two uprights to the horizontal part: Note the Exacto knife in the corner to show how big this monster is... After that, the instructions call for installing all these little posts in the wings to hold the engines and wing fillets. The posts came in these little rods that had to be cut into fourths to place in each hole. After drilling out the holes in the wings, I started by gluing the posts in place; then when they were dry, I cut off the top 3/4's and glued to the next holes, then cut them down again, lather, rinse, repeat until all the holes had posts: Later, after sufficient setting time had passed, I added each engine pylon: Later the wing fillets went on and as they all dried, I started the other wing with the posts: Again, the engines and wing fillets then got glued on to this one and now both wings are completed: Later on, I applied a thin coat of Gator's grip glue to each pylon and fillet to reinforce the CA glue and to fill any small gaps that remained. That is all drying now and waiting for paint. That completes the Hangar portion of this tour, on to the Shipyards. The Shipyards have been busier, several keels were laid down for new projects. The first of these is a Mahan-class destroyer: Later after that was dry, the deck, hull and superstructure were painted: Now we'll be able to get the detail parts all added. Meanwhile, another ship's keel was laid, this time a Liberty class cargo ship: ]https://modelersalliance.org/galleries/wip-liberty-ship-i-jpg.132758/full[/IMG Then the superstructure and some detail parts were added: Later this was painted along with the destroyer: One more keel was laid, this time for the USS Olympia. I had this in the stash for awhile, it's time to get it built: The superstructure was then built and added to the hull later: Once all that was dry, the lower hull was painted red and then masked when dry so the upper works could all be painted white later: One last new project, the USS San Francisco was then laid down. I didn't get much further than this though: One of the two current projects were worked on as well. The Japanese ship JMSDF Chikugo (mislabeled Chikuma) got a coat of paint on it: More details will be added and detail painted and then decals will complete this little ship. Meanwhile, on the USS Enterprise, some touch up painting was done: While that was drying, I worked on the air wing, getting them all built and painted. The the deck-edge details and other small assemblies were added and this bird farm is ready for decals and final details: That completes this tour of the Shipyards, on to the Motor Pool which also had only one more project going. This is the Russian BAL-E coastal defense system truck, designed to take out ships offshore, The chassis was built first, of course: Later the driver's cab, engine cover and command cabin were built and installed on the chassis: Next, the missile tubes were built: Once this was all assembled together, it got it's base coat of green: It won't be much longer on that one. That completes this tour of the facilities for now. Thank you to all who stopped in and commented, they are always welcome. We'll see you at the next tour.

From the convention Center .. I asked them Hi William 🙂 We are only two floors, the first level and second level. We do have a passenger elevator that is located behind the Sales & Event Planning offices and in the alcove that the ATM is also located on the first floor. On the second floor it is located just to the right of the escalator as you are facing the escalator. Both are marked with ample signage as well as for our events we have Host that can direct you to where ever you intend to go 🙂 The Hilton Hotel that is physically attached to the Grand Wayne Center's building and is all "one building" inside has its own elevator bank that serves the hotel to their sleeping rooms and meeting rooms on their side of the building (or east end of building facing Calhoun Street) and are located just past the front desk in the hotel. I hope this helps. Let me know if you have any further questions. Stacey Paunovich | Assistant Business Manager main: 260.426.4100 | spaunovich@grandwayne.com | grandwayne.com 120 W. Jefferson Boulevard, Fort Wayne IN 46802

In addition to my Panzer IV, I will be working on this “Child of Doom”. I would guestimate that I started this one at least 14-15 years ago if not longer, and stalled out due to some warpage where the lower forward fuselage meets the bottom part of the wing. Before that point I had finished the cockpit and engine. I’m converting this to a P-47C using an AM resin cowling from Cutting Edge I’m planning on building USAAF ace Robert Johnson’s P-47C “Half Pint”, in which he nearly was shot down during one of his early combat missions… This particular Jug never flew again after that mission, but Johnson did and eventually became the first USAAF pilot in the ETO to break Eddie Rickenbacker’s 26 kills score, and also one of the top scoring USAAF aces in the ETO with 28 kills before rotating back stateside at the end of his combat tour. I’ll be using this set of decals So after all that preamble, fast forward to the past couple of days, as I resumed work. Yesterday I airbrushed on a coat of primer onto the resin cowling Then after looking at several color and B&W photos of the fuselage spine under the canopy hood, I decided to go with OD under there and repainted that area, in addition to painting black under where the windscreen will go Today I glued the cockpit tub in place Next update in a day or two…

Beautiful job! That is such a sensational model! Way to go!

Stunning work Gil! Once again, another striking example of a Master builder!

TTTTTTTTTThank !

Nice, colorful touch! Gil

First I'd like to thank you for following my WIP , it's quite appreciated ! Here another space related project I been working on , its the COLLECT-AIR BOEING X-20 DYNASOAR ! (JUL 15th) today ,I I continue adding ther last detail to the back section ! If you like to view the complete WIP , just follow this Google link to my personal page: https://photos.app.goo.gl/Rjsjms9BhTrbnhYDA If you like to view the other space related project I have done so far , just follow this link: https://photos.app.goo.gl/ov2R8HFSA26iDpms5 Enjoy ! Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 15th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 15th ) Today I start adding the lastt inner details to the tail section ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

First I'd like to thank you for following my WIP , it's quite appreciated ! Here another space related project I been working on , its the COLLECT-AIR BOEING X-20 DYNASOAR ! (JUL 14th) today ,I I start continue adding ther last detail to the back section ! If you like to view the complete WIP , just follow this Google link to my personal page: https://photos.app.goo.gl/Rjsjms9BhTrbnhYDA If you like to view the other space related project I have done so far , just follow this link: https://photos.app.goo.gl/ov2R8HFSA26iDpms5 Enjoy ! Jmarc

Thank you for following my wip on this project , it's quite appreciated ! FUJIMI 1/48 WESTLAND WASP and SCOUT (JUL 14th ) Today I painted the seats and start to add the missing details on the floor of the 2 versions ! If you like to follow the complete WIP on this project , just follow this link to my personal Goggle page : https://photos.app.goo.gl/g9FmoRJ2xbynscfk6 If you like to view all the other CHOPPER I have done so far , just visit this link: https://photos.app.goo.gl/a53KFY5v9WWjf3m8A Hope youl,le enjoy following this project ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 14th ) Today I start working on the connection cable ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 14th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

Thanks for following the WIP on this project , it's quite appreciated !, here the latest update AVRO C.102 JETLINER (3D +SCRATCH) (JUL 13th ) Today , I sanded the work done last time, start ingraving the front section and finally started the work on the airframe intake ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/uvk6ymGqZHgpWDaR9 If you like to view what I have completed so far on the AVRO CANADA project , I have set up an GOOGLE page for them , here the link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Enjoy and it's an 'rendez-vous' next week for more on this particular project..!. Jmarc

Thank you for following the 'WIP' on this project ,it's quite appreciated ! (JUL 13th)...Today I completed the wing tips ! f you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/1W6Eu6c7EvJeyLGT6 If you are curious and like to view the SCI-FI kits I have done in the past ,just follow this link : https://photos.app.goo.gl/D2FAQcJCoNhHNjkdA Enjoy ! jmarc

First I'd like to thank you for following this WIP it's quite appreciated ! TRUMPETER 1/48 GERMAN SUBMARINE TYPE VIIc (JUL 13th)...Today I continue working on the ceiling details ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/EZKenssCafCXix326 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://photos.app.goo.gl/BcwASAzLsZRq5mQf7 Enjoy ! jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 13th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 13th ) Today I start working on the connection cable ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc