Chris Bucholtz Posted February 24 Report Posted February 24 I have a love of all things Battle of Midway, and I like building planes crewed by people I knew. This scratches both itches - this is Torpedo 3's T-3, flown by MACH Harry Corl and ARM2c Lloyd Childers. I got to know Lloyd through the Battle of Midway Roundtable, an on-line study group, and as it turned out he lived over in the LaMoraDa area (Lafayette/Moraga/Morinda - just through the Caldecott Tunnel here in the San Francisco Bay Area). His favorite restaurant was Acapulco, a Mexican place in my hometown of Alameda! Not only did Lloyd enjoy homey Mexican places, he happened to be the only rear-seater in Torpedo 3 to attack the Japanese Mobile Fleet (Kido Butai) at Midway and live to tell about it. I wrote his story for the December 2005 issue of Flight Journal Magazine (you can read an updated version at https://obscureco.wordpress.com/2026/01 ... or-in-172/), but I dilly-dallied on building the TBD, maybe because I was hoping a new AND accurate kit would come out in 1:72. Alas, no (not yet, at least). I'm working on a Midway display at the USS Hornet Sea, Air and Space Museum, and I took on the TBD; I had collected as many TBD models and parts as I could over the years, so I thought I'd be best to tackle it. So here it is. The basic airframe is Airfix, with the rivets NEARLY sanded all the way off, and some scribing lines added. The interior is mostly the White Ensign photoetched set, with the seats, bombardier/second pilots side consoles and radioman gunner's floor taken from the Valom kit, which also contribute the torpedo, landing gear (cut to the right height), wheels and radio antenna mast. The instrument panel was scratch-built; belts came from photoetched parts intended for an SB2U Vindicator. The flexible .30-caliber gun is a Miniworld item modified with the right grips and the flash suppressor on the real thing. There's also the small windage sight on the barrel, made from a 1:700 photoetched anemometer. The clear parts are from a Falcon vacuformed set. There's a scratch-built set of radio gear under the turtledeck ahead of the radioman/gunner if you look hard enough. In the bombardier/co-pilot's seat is a scratch-made life raft. Lloyd told me that standard operating procedure on torpedo missions was to remove the Norden bombsight (in a compartment under the pilot, which the bombadier was crawl into, and then open a set of doors just behind the cowling to sight) and to take the life raft out of its compartment and belt it into the unused seat, where it could be accessed easily in the event of ditching. In the case of T-3, the engine had thrown so much oil Corl couldn't get the rear canopy open, and they had to swim for it (Corl dragged the badly wounded Childers to the safety of the whaleboat from USS Monaghan). It came out OK for a kit from 1969! 2
VMF211 Posted February 25 Report Posted February 25 THAT is really nice!!! The interview of Lt Col. Childers about the briefing before Midway was eye opening. They told them that if just 3 of you (out of 15) get through to and deliver your torpedoes we will consider that you have accomplished your mission. "I immediately became alarmed because the odds were not good."
ghodges Posted February 25 Report Posted February 25 Excellent build and attention to details Chris! It's a very fitting tribute to Lloyd and his fellow aviators who sacrificed so much for us and turned then tide in one of the darkest hours of the war. Gil
Recommended Posts