All Activity

In addition to my Panzer IV, I will be working on this “Child of Doom”. I would guestimate that I started this one at least 14-15 years ago if not longer, and stalled out due to some warpage where the lower forward fuselage meets the bottom part of the wing. Before that point I had finished the cockpit and engine. I’m converting this to a P-47C using an AM resin cowling from Cutting Edge I’m planning on building USAAF ace Robert Johnson’s P-47C “Half Pint”, in which he nearly was shot down during one of his early combat missions… This particular Jug never flew again after that mission, but Johnson did and eventually became the first USAAF pilot in the ETO to break Eddie Rickenbacker’s 26 kills score, and also one of the top scoring USAAF aces in the ETO with 28 kills before rotating back stateside at the end of his combat tour. I’ll be using this set of decals So after all that preamble, fast forward to the past couple of days, as I resumed work. Yesterday I airbrushed on a coat of primer onto the resin cowling Then after looking at several color and B&W photos of the fuselage spine under the canopy hood, I decided to go with OD under there and repainted that area, in addition to painting black under where the windscreen will go Today I glued the cockpit tub in place Next update in a day or two…

Beautiful job! That is such a sensational model! Way to go!

Stunning work Gil! Once again, another striking example of a Master builder!

TTTTTTTTTThank !

Nice, colorful touch! Gil

First I'd like to thank you for following my WIP , it's quite appreciated ! Here another space related project I been working on , its the COLLECT-AIR BOEING X-20 DYNASOAR ! (JUL 15th) today ,I I continue adding ther last detail to the back section ! If you like to view the complete WIP , just follow this Google link to my personal page: https://photos.app.goo.gl/Rjsjms9BhTrbnhYDA If you like to view the other space related project I have done so far , just follow this link: https://photos.app.goo.gl/ov2R8HFSA26iDpms5 Enjoy ! Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 15th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 15th ) Today I start adding the lastt inner details to the tail section ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

First I'd like to thank you for following my WIP , it's quite appreciated ! Here another space related project I been working on , its the COLLECT-AIR BOEING X-20 DYNASOAR ! (JUL 14th) today ,I I start continue adding ther last detail to the back section ! If you like to view the complete WIP , just follow this Google link to my personal page: https://photos.app.goo.gl/Rjsjms9BhTrbnhYDA If you like to view the other space related project I have done so far , just follow this link: https://photos.app.goo.gl/ov2R8HFSA26iDpms5 Enjoy ! Jmarc

Thank you for following my wip on this project , it's quite appreciated ! FUJIMI 1/48 WESTLAND WASP and SCOUT (JUL 14th ) Today I painted the seats and start to add the missing details on the floor of the 2 versions ! If you like to follow the complete WIP on this project , just follow this link to my personal Goggle page : https://photos.app.goo.gl/g9FmoRJ2xbynscfk6 If you like to view all the other CHOPPER I have done so far , just visit this link: https://photos.app.goo.gl/a53KFY5v9WWjf3m8A Hope youl,le enjoy following this project ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 14th ) Today I start working on the connection cable ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 14th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

Thanks for following the WIP on this project , it's quite appreciated !, here the latest update AVRO C.102 JETLINER (3D +SCRATCH) (JUL 13th ) Today , I sanded the work done last time, start ingraving the front section and finally started the work on the airframe intake ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/uvk6ymGqZHgpWDaR9 If you like to view what I have completed so far on the AVRO CANADA project , I have set up an GOOGLE page for them , here the link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Enjoy and it's an 'rendez-vous' next week for more on this particular project..!. Jmarc

Thank you for following the 'WIP' on this project ,it's quite appreciated ! (JUL 13th)...Today I completed the wing tips ! f you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/1W6Eu6c7EvJeyLGT6 If you are curious and like to view the SCI-FI kits I have done in the past ,just follow this link : https://photos.app.goo.gl/D2FAQcJCoNhHNjkdA Enjoy ! jmarc

First I'd like to thank you for following this WIP it's quite appreciated ! TRUMPETER 1/48 GERMAN SUBMARINE TYPE VIIc (JUL 13th)...Today I continue working on the ceiling details ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/EZKenssCafCXix326 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://photos.app.goo.gl/BcwASAzLsZRq5mQf7 Enjoy ! jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (JUL 13th ) Today I continue adding the last details ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (JUL 13th ) Today I start working on the connection cable ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

June 28th, 2026 Regular Eboard Meeting Call to Order The meeting was called to order on May 17th, 2026 at 7:00pm EST by John Noack. Eboard Roundtable/Action Item Updates DL – Regional Awards have all been distributed and National Awards are being prepared. Has been sending out recruitment brochures and posters to chapters having shows. Planning to upgrade the brochures in the near future. MO – Things are going well, expenses are trending lower than previous year. SH – Two bidders for the 2028 and 2029 conventions so far. Discussion was held on options for the awards show for the 2026 convention. DM – Continuing to contact vendors for reviewer corps items, shipping continues to be a detracting factor. Finalizing the reviewer corps get-together and industry appreciation dinner. ETR – Has been attending the 2026 Nats meetings and working with them still. Building the photography teams for the contest but could use a few more to help. Has been working on the new website look and continues to make progress. Is working with JT on the slideshow for the annual business meeting. CB – Journal is going great and is on time. Style guide has been developed and is available to all the journal team members. Currently looking for someone to help as an ad manager and have brought in one editor and two graphics people to help assist the journal team. JN – Authorized the sending of copies of the journal to some brick and mortar hobby stores. Will be appearing on a podcast on July 11th. JT – Nothing new, working on getting and putting slides together for the annual business meeting. Actually had time to work on a model! Nothing Further the meeting was adjourned at 8:00pm EST. The next meeting is scheduled for July 19th, 2026 at 7:00pm EST via Zoom. View the full article

Regular Eboard Meeting Call to Order The meeting was called to order on May 17th, 2026 at 7:00pm EST by John Noack. Eboard Roundtable/Action Item Updates PP – Attended a meeting with SH and the convention team regarding the contest and judging. Everything is going well. Plans to follow up on the video regarding what judges look for. JT – Attended meetings with SH and the Tiger Meet coordinator on new SIG and Club display awards for Tiger Meet. Coordinated for a SIG Leader Social event during Nationals and a seminar on IPMS/USA SIGs. Slide preparation for the annual business meeting is coming up and board members should start putting their slides together. DL – Regional awards have been ordered and will be getting mailed to the RC’s soon. Two new potential chapters being started. Chapter social and RC breakfast being planned. MO – Financial picture remains as expected. Recently purchased some replacement hardware for the convention. SH – Convention pre-registration is going well, numbers are about average compared to past conventions. Unfortunately had to cancel the Auburn Museum Tour due to not meeting minimum attendee requirements. Still have trophy packages needing sponsors. Convention journal is in design status and with the journal team. DM – Continuing to post reviews as they come in and working on getting late reviews submitted. Has been working on the reviewer corp get-together and manufacturer’s dinner at Nationals. JN – Offered to let the rest of the Eboard use his column in the journal if they have a topic they would like to cover as a “guest editorial.” Nothing Further the meeting was adjourned at 7:57pm EST. The next meeting is scheduled for June 28th, 2026 at 7:00pm EST via Zoom. View the full article

That addresses question one. What about an elevator? That is not addressed on the website, which is why I have asked here.

Calling this one done. In spite of all of the tiny parts and the frustration of trying to get them in the right spot with a minimum of glue, I have to say this kit was well done. Some of the tiniest could have been incorporated into larger parts and some I substituted some craft wire for. Nevertheless this is a great interpretation of the Cat D-7 and is quite authentic in comparison to photos I have seen.

Awesome job on nice old kit!! Just gorgeous!!!!

Well Done Gil

Like my good friend here Mark Duke Maddog, I am going to start an all subject build thread here to keep on rolling with whatever my ongoing project(s) will be. I’m gonna lead off with this one My latest resurrection project from the Shelf of Doom… I started this for a So.Cal AMPS Panzer IV GB about 10 years ago I was going to replace the kit tracks with some AM tracks and eventually settled on some Modelkasten indy links Since I wanted to do a DAK Panzer I decided to replace the crew figures with a set from Verlinden and the kit decals are replaced by a set from Bison I got most of the basic assembly finished, but then hit a snag when I tried to fit the AM tracks to the kit sprockets. The sprockets were too wide as engineered. So I put it onto the shelf of doom after getting this much completed So yesterday I decided to pull this one off the shelf and tackled the reason for the stop first. I cut the sprockets in half, sanded away some of the middle section until they would fit the MK tracks, then glued them back together. Then a test fit onto the lower hull This won’t be my main project, but I will be chipping away at it for the next while until it is finished.