All Activity

Thanks very much, Jmarc!

Thank you for following the 'WIP' on this project ,it's quite appreciated ! (AUG 26th)...Today I continue working on the head section and the presentation base ! f you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/1W6Eu6c7EvJeyLGT6 If you are curious and like to view the SCI-FI kits I have done in the past ,just follow this link : https://photos.app.goo.gl/D2FAQcJCoNhHNjkdA Enjoy ! jmarc

Thanks for following the WIP on this project , it's quite appreciated !, here the latest update AVRO C.102 JETLINER (3D +SCRATCH) (AUG 26th ) Today , I continue ingraving the front section and sanding the airframe intake and windshield ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/uvk6ymGqZHgpWDaR9 If you like to view what I have completed so far on the AVRO CANADA project , I have set up an GOOGLE page for them , here the link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Enjoy and it's an 'rendez-vous' next week for more on this particular project..!. Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! Time to complete another WHIPPET CANADAIR CL-327 ( 3d PRINTED) (AUG 26th ) Today , I continue working on the replacing blade and the last details of the presentation ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/3QPU8Ntb4dt57CuH6 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this WIP it's quite appreciated ! TRUMPETER 1/48 GERMAN SUBMARINE TYPE VIIc (AUG 26th)...Today I continue working on the ceiling details ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/EZKenssCafCXix326 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://photos.app.goo.gl/BcwASAzLsZRq5mQf7 Enjoy ! jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (AUG 26th ) Today I done the dry-brush on the fuselage interior , and start working on an pallet to position the fuselage on ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

LLLLLLLLLLLLLooking great , love your choice of colors !...BBBBBBBBBRAVO for a job well done !

I started this project with the intention of building the 1/48 Hobby Boss F8F-1 kit. But early in construction, I ruined the lower wings trying to install resin gear bays. I ended up pulling a Hobby Craft F8F-1 kit from the stash, and elected to use the Hobby Craft cockpit, wings, stabilizers and fuselage, and the Hobby Boss prop, cowl, landing gear, gear doors, canopy rear deck and roll-over brace. I used markings from Starfighter Decals that depict an F8F-1, Bureau Number 94759, attached to the Naval Air Facility/Naval Ordinance Test Station at Inyokern, Califoirnia in 1950. This Bearcat was used for HVAR (high velocity aircraft rocket) testing. Here's a link to a full build article: https://imodeler.com/2026/08/1-48-hobby-craft-hobby-boss-f8f-1-bearcat/

Coverage of the 2026 IPMS Nationals - Automotive, Sci-fi and MiscellaneousView the full article

Here's where we are as of today. There is still some work to be done on the ladder portion of the build but it is coming along slowly. There is no timeline for something so complex.

SSSSSSSSSSurely will !

Yes, there is always a new project ahead. Just stand by for the next one soon.

Hi ! Here another project I have done in the past , of course it's scratchbuilt , if you like to view more pics of this prject , I have set-up an GOOGLE page for it, just follow this link: https://photos.app.goo.gl/yuQutHmNnZNFEhdY7 Enjoy ! Jmarc

LLLLLLLLLLooking good !

Good news , OH,OH,OH....this mean new project ahead ... GO,GO,GOOOOOO

Thank you Jean Marc. They are getting to the end finally.

LLLLLLLLLLLooking good !

In addition to my current P-47 project, I’ve also been plugging away at this old project, the old Tamiya German Motorcycles kit, along with the one that came with the Flak 36 kit that I built many years ago and never finished. So as paint or glue was drying here and there, I have made some progress on these bad boys. Recently I finally finished basic paint and decals Today I did some heavy duty weathering. I was not quite intending on such a heavily weathered look, but in the end I decided to run with it… I still need to do a bit more painting and weathering on the riders to match the bikes dusty finish, and then finish painting then add their rifles 😉

So my latest batch of progress photos… During the week I applied Tamiya Liquid Panel Liner then cleaned it up. Afterwards I then airbrushed on a flat clear coat A couple of days ago I replaced the kit gun barrels with some Albion brass tubing of an appropriate diameter and cut to the proper lengths, and then glued them in place. Today I painted the gun barrels with Metalizer Steel I also today finished painting the exhaust stacks and turbocharger exhaust shroud, among other small details That’s all for today… finish line is approaching rapidly!!!

Ron, Beautiful job on a challenging kit. An additional note about the mixed power interceptor concept in the U.K. The S.R. 53 was not so much a prototype as a technology demonstrator. It was never intended to be an operational interceptor. The S.R. 177 was to be the aircraft with mixed power that would actually be armed and fill the interceptor role. A mock-up was built and some metal was cut before the whole program was cancelled. It was to be a much bigger aircraft. It was not dissimilar to the relationship between the Hawker P.1127 Kestrel ( the VTOL technology demonstrator) and the P. 1154 (the intended operational supersonic version). The P. 1154 was cancelled but, in this case, the P. 1127 went on to be produced as a sub- sonic attack and close support fighter we know as the Harrier. Nick

Nice clean build that emphasizes the clean and eye appealing lines of the plane! I really like those "T" tail designs from that time period too! Gil

This is part of a series of books by Helion on Technology and War. The book is unique in that on many of the pages they have printed bar codes that can be used to view online videos. This is a great idea, and I loved the ability to watch the videos as I read the book. This book covers the growth and use of Combat cameras from World War two up to 1991, it is lavishly illustrated with many great pictures, many of which are stunning. The book has a lot of content which provides a lot of history and background to the camera unit and the way they worked and development the use of cameras in the US Air Force. It was interesting to see the involvement of Hollywood In the early days of the program. Also, how technology and its uses grow in war time and in peace time. View the full review

Produced by UMM-USA (Unique Master Models-USA), these three shapes are part of a larger catalog that contains an extensive number of profiles and sizes made from extruded lead. The shapes and various sizes are useful to the modeler in a variety of applications. I’ve been using the Round Lead Wire (RLW) 0.2 as vertical railing sections for quite a few years. The Half Round lead wire (HRLW) and Flat Lead Wire (FLW), are all shapes that are nicely extruded and have the same profile dimension throughout with measurements bearing out the high quality of the extrusion process. View the full review