All Activity

"Later Today" meaning as I eat breakfast..... and it looks like Spraygunner.com carries a lot of parts. I'll check Coast Airbrush a bit later. Again...thanks guys. When my brother passed away I was invited to clean out his "modeling stash" and found four or five Paasche airbrushes.....mostly disassembled. I'll try to reassemble them and bring them up to working conditions.

Thanks Eric and Mark. I'll look into it later today.

If they don't, then Coast Airbrush here in SoCal will.

UPDATE 117.... Hi , here a pic of the project i completed this week..it's in 1/48 scale WWII US GI 'PRIVATE BLACK (TAMIYA) https://photos.app.goo.gl/19A2iENxUTRMWadq6 AVRO CANADA EMPLOYE https://photos.app.goo.gl/nmSZrGimois7RV9c7 AVRO CANADA SECRETARY https://photos.app.goo.gl/f845jHqMwpWEytk28 Like to view what I have done so far in 2026 season , just follow this Google link : https://photos.app.goo.gl/dJwnAmhVD15JPt9w8 Like to see more of my previous completed projects in 1/48 scale ..................... Like to see what I have completed so far this season 2025 (143 projects) , just follow this GOOGLE link: https://photos.app.goo.gl/zKmRkgK19W2fPoin7 Like to see what I have completed so far this season 2024 (103 projects) , just follow this GOOGLE link: https://photos.app.goo.gl/4d3DYFCkVLL64imq8 Like to see what I have completed in 2023 season (100 projects) , just follow this GOOGLE link: https://photos.app.goo.gl/Wbzocz4nrbgcPuAQ6 Like to see what I have completed in 2022 season (148 projects). just follow this Google link: https://photos.app.goo.gl/WniLxX42pzCF6JYH9 Like to see what I have completed in 2021 season (110 projects). just follow this Google link: https://photos.app.goo.gl/d89Abe6NeE8LJUEeA Like to see what I have completed in 2020 season (65 projects) ,just follow this Google link : https://photos.app.goo.gl/piTfBCtMXvf6g5zG8 Like to see what I have completed in 2019 season (35 projects) ,just follow this Google link : https://photos.app.goo.gl/wX42Q8pKRqwR7APR9 Like to see what I have completed in 2018 season (52 projects) ,just follow this Google link : https://photos.app.goo.gl/SnL7aiYFfHrV5JbA8 Like to see what I have completed in 2017 season (33 projects) ,just follow this Google link : https://photos.app.goo.gl/1RxEF7q89HnJUjGA6 Like to see what I have completed in 2016 season (33 projects) ,just follow this Google link : https://photos.app.goo.gl/299uiMnC7C2PDaABA Like to see what I have completed in 2015 season (33 projects) ,just follow this Google link : https://photos.app.goo.gl/e9kY3Gg1D3fxECtC9 Enjoy !

First I'd like to thank you for following this WIP , it's quite appreciated ! LOOCKHEED WV-1 CONSTELLASTION in 1/48 (MAY 01st ) ..Today I continue ingraving the panel lines on the fuselage ! If you like to view the complete WIP on this project , juts follow this Google link : https://photos.app.goo.gl/GZvfX8dsdnYnsQ2W7 Here a pics of both projects Enjoy Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +MODIFICATION) (MAY 01st ) Today I continue to add the ;last details !! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 BELL UH-1D (ESCI) (MAY 01st ) Today I glued the window back and add the protective tape on them ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 If you like to view the other BELL UH-1 HUEY projects I have done so far .,just follow this link : https://photos.app.goo.gl/DqxAFqjkYiFPMMY47 Enjoy ! Jmarc

The fuselage is now mostly complete since the nose has finally been added! The main thing that jumps out in the pic is the bracing strip in front of the first cockpit. I used multiple layers of tape wrapped around the nose to do it. You can also see one of the masks for one of the window openings has come off during handling. Note the crawl platform that's been added between the pilot and gunner's cockpit. It's just a plastic sheet bordered by upside down "L" shaped strip. In addition to the nose reinforcing strip, note that I repaired the forward access panel and also added a wire grab handle near the crawl pad. This view shows the scratchbuilt tail wheel and a closer look at the rear sides shows the reinforcing strips added around the areas for the control wire holes and the tail plane underside brace points. Next up is another round of filling and sanding imperfections, but it feels good to seemingly be making faster progress! Comments, questions, and critiques welcome, as always! Gil

https://spraygunner.com might have some E

Any suggestions on where I can buy individual parts for Paasche airbrushes?

Thank you for following my wip on this project , it's quite appreciated ! FUJIMI 1/48 WESTLAND WASP and SCOUT (APR 30th ) Today I continue working on the seats for the 2 versions ! If you like to follow the complete WIP on this project , just follow this link to my personal Goggle page : https://photos.app.goo.gl/g9FmoRJ2xbynscfk6 If you like to view all the other CHOPPER I have done so far , just visit this link: https://photos.app.goo.gl/a53KFY5v9WWjf3m8A Hope youl,le enjoy following this project ! Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +MODIFICATION) (APR 30th ) Today I done the was /ry-brush and start to work on the last details finally located the whels I will use for this project !! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 BELL UH-1D (ESCI) (APR 30th ) Today I done the wash / dry-brush and add the handle ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 If you like to view the other BELL UH-1 HUEY projects I have done so far .,just follow this link : https://photos.app.goo.gl/DqxAFqjkYiFPMMY47 Enjoy ! Jmarc

In 60-plus years of modeling I’ve never had a “modeling stand” except what I’ve hand made or jury-rigged, Rube Goldberg style. This is the first “store bought” rig that I’ve owned, and I’m glad I waited until now. View the full review

Tamiya 1/24 Epson Honda NSX 2005View the full article

First ,I'd like to thank you for following this WIP , it's quite appreciated GLENCOE 1/48 USCG 36 FOOT RESCUE BOAT ! (APR 29th ).....Today , I completed the rudder section and painted it ! If you like to view the complete WIP of this one , follow this GOOGLE link... https://photos.app.goo.gl/EfNcXnQDo6g2vL5B7 If you are curious and like to see the other 1/48 ship ,I have built , just follow this Google link to my personal page : https://photos.app.goo.gl/cpC5Q6puZkJTQ2mHA Enjoy Jmarc

First I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +MODIFICATION) (APR 29th ) Today I start painting the launching piston of the US version launcher !! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy ! Jmarc

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 BELL UH-1D (ESCI) (APR 29th ) Today I painted the inner window frames on the second door ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 If you like to view the other BELL UH-1 HUEY projects I have done so far .,just follow this link : https://photos.app.goo.gl/DqxAFqjkYiFPMMY47 Enjoy ! Jmarc

Thanks to some good friends (yes, I do have them!!) I was able to get these things, one was a raffle prize, the other was some things a friend was getting rid of. First the prize: A magnificent book that will tell you just about anything you want to know about the Italian Air Force in WWII. Man, I have an even higher respect for them now after reading this: The next thing (or things) I got were these three LED light strips powered by 9-volt batteries and are turned on by a magnet: These went inside my church I've been building for awhile, now the stained glass windows can be seen when these are on. Finally, the last three birthday purchases came in: Okay, that's all I got for now, time to prepare for another tour.....

TTTTTTTTTThanks !

I'm trying to track down a Vac-Form 1/48 scale kit of a B-47. At one time, it was available through Sanger Engineering in the UK. Also, might be associated with a gentleman named Gerald Elliott. Last year, I was briefly in email communication with Mr. Elliott but have now lost contact, and Sanger is not responding to emails. If anyone has knowledge of this kit and/or Sanger Engineering, I would appreciate any information. Thank you! Larry

I just learned this about four months ago, Ron. It's very helpful for getting clothes on figures to not be glossy. I probably saw this tip in the same place you did!