Narampa Posted October 16, 2023 Report Share Posted October 16, 2023 I bought a small bottle of decal adhesive TAMIYA Of course no instructions because the bottle is too small. Can somebody tell me how to use this properly? Thankyou! Link to comment Share on other sites More sharing options...
Eric Aitala Posted October 16, 2023 Report Share Posted October 16, 2023 https://www.tamiya.com/english/products/87176/index.htm Link to comment Share on other sites More sharing options...
Ron Bell Posted October 16, 2023 Report Share Posted October 16, 2023 Or, as a variant of the above if you don't want to risk damaging the surface of your model, spread a thin coat over a piece of scrap plastic and "float" your decal on it. Then remove the deal with tweezers, touch the end of it to a paper towel to whisk off the excess adhesive and then apply to the model. I use the same method with whatever J&J's Klear Liquid Wax is now called to prevent silvering in some instances. It provides an instant smooth surface under the decal and it acts as adhesive. Don't use too much, however, or it will build up on the edges of the decal when it dries and form a ridge. Link to comment Share on other sites More sharing options...
Recommended Posts