phil Posted May 13, 2020 Report Posted May 13, 2020 Going to build the Italeri of above soon. They provide lots of screws and nuts for construction. My question, original construction of 1:1 would have been bolts and nuts rather than screws? Frame and running gear would have bolted up as opposed to large screws? Where visible I want it to look original. Fussing about little detail I guess. Thanks for the feed back. Phil S
Eric Aitala Posted May 15, 2020 Report Posted May 15, 2020 Shameless plug - you might ask over in the Forums on F1M.com Eric
Eric Aitala Posted May 15, 2020 Report Posted May 15, 2020 And don't forget >> https://web.ipmsusa3.org/content/alfa-romeo-2300-8c-monza-race-car E
phil Posted May 25, 2020 Author Report Posted May 25, 2020 Thanks for this link to the kit review and build posting. Great info. I will refer to this many times I am sure. Phil Scala
noelsmith Posted June 20, 2020 Report Posted June 20, 2020 Have a look at Scale Motorcars forum as they tend to specialise more in larger scale models. HTH.
RickSchad Posted August 24, 2020 Report Posted August 24, 2020 I just built this very kit. It is a fiddly build but with a lot of care and scratch building it comes out pretty great!
Recommended Posts