All Activity

Very nicely done Charles! I have the 1/35 Testors Italeri boxing of the same vehicle in my stash to tackle one day…

Today’s progress report: I went and did touch ups on the OD/Neutral Gray demarcation line, then removed the masking from the white theater ID marking areas Next up is a gloss coat on and then getting it ready for decals…

Show Shout Out For Upcoming IPMS Nats and Local ShowView the full article

Here's a WC 63 for comparison. 1/25 scale scratch built mostly of Evergreen plastic and some sheet brass thrown in for good measure.

I've had that happen with some MCW lacquers from bottles that had been around for a few years but also with Ace Hardware interior metallic that I had just purchased and decanted to spray from my airbrush. I wrote it off as "old paint" with the MCW but as long as spray paint still has gas I'm guessing there's no oxygen there so it left me "back to baffled".

First I'd like to thank you for following my WIP , it's quite appreciated ! Here another space related project I been working on , its the COLLECT-AIR BOEING X-20 DYNASOAR ! (AUG 03th) today ,I continue working on the side fuselage and top wings ! If you like to view the complete WIP , just follow this Google link to my personal page: https://photos.app.goo.gl/Rjsjms9BhTrbnhYDA If you like to view the other space related project I have done so far , just follow this link: https://photos.app.goo.gl/ov2R8HFSA26iDpms5 Enjoy ! Jmarc

iFrst I'd like to thank you for following this post ,it's quite appreciated ! BOEING INCITUS MQ-27 / CU-169 SCAN EAGLE 1/48 ( 3dPRINTED +ADDITIONS) (AUG 03th ) Today , I continue adding the last details to the box ! If you like to view the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/jrWyBiNZSJHCUknZ9 If you like to view all the DRONES I have done so far in 1/48 , just follow this link: https://photos.app.goo.gl/mjGm69hDKYaDuFNX6 Enjoy !

First I'd like to thank you for following this post , it's quite appreciated ! 1/48 LOCKHEED T-33 SILVER STAR (TESTOR) (AUG 03th ) Today I start working on the additions wing parts ! If you like to follow the complete WIP on this project , I have set up an GOOGLE page, just follow this link .. https://photos.app.goo.gl/mCtpo97pwYCFaYE39 If you like to view the complete STASH PARTS done so far ,just followthis GOOGLE link .. https://photos.app.goo.gl/NtNSgh1zJgx9jRSx5 Enjoy ! Jmarc

The fluorescent paints act a little odd sometimes...

In The Box The kit comes in a sturdy 12” x 8” x 5” box with an illustration of the Tsubaki figure. Images of the finished model can be found on the box sides. Like Gundam kits, it comes molded in multiple colors so that a nicely finished model can be built right out of the box with minimal work. Both painted and unpainted images of the kit are shown on the sides of the box. The kit comes with thirty nine individually bagged sprues molded in eight colors. The engineering of the parts is designed to emulate the paint breaks of the figures complex color scheme. The runners are molded in POM, PVC and ABS and all the parts are designed to be snap fit. Regular solvent based glue will not affect these types of plastic. Figure kits are meant to be posable, thus tougher plastics are necessary so that the joints will both hold a pose and be durable. View the full review

When I built my Werner’s Wings MH-47E conversion from the Trumpeter CH-47D I found out something that almost made me shelf the model, the landing gear was crap. Not in that it lacked detail but in the fact that it fell apart. The metal was brittle to the point of breaking up into multiple pieces as I tried to assemble it. I tried pinning the metal, but it just shattered more. I finally won but I don’t know how. I would have killed to have this set. View the full review

For years the only way you could get an AH/MH-6 Little Bird in 1/48th scale was to buy a Hasegawa Hughes 500 and a CMK conversion set. This was expensive and sometimes hard to find. Now, thanks to ICM, we can build both kits out of the box. This review is about the MH-6J. View the full review

GGGGGGGGGGod ideal !!.. let stay calm here ..lol

After sitting on the shelf of doom for over a decade, I am not gonna rush this and mess it up now… 😉

Thank you Charles! Yes, this variant is indeed quite similar in role and style to the WC-62, now that you mention it. 🤔 Other variants of the family had quite different configurations on the same chassis and cab.

I’ve had that happen with Mr Color lacquers. I had been warned about the quirk by other users of the brand. Something to do with some of the paint drying in the air as it leaves the airbrush nozzle before reaching the surface of the model and leaving those cotton candy like strands all over. Odd that it happened with Testors paint though. In nearly 40 years of airbrushing those paints I’ve never encountered that phenomenon with them.

I seem to recall the same thing happening to me long ago when I tried to airbrush it, except it was also "spiderwebbing" out from the airbrush as well. Since your paint actually made it onto the model it sounds like a much milder form of the problem I had. My guess is that it's drying and sticking to itself in the air.... in my case so badly it never went onto the surfaces and in your case only enough to where the residual particles in the air bonded together, and since they were essentially dry they simply brushed away after they settled. I never found an answer as I've never tried airbrushing it since then. The only answer that comes to mind is perhaps adding a retarder of some sort into the mix. Gil

CCCCCCCCCCCool. your getting there , let it edry prperly if you wish to avoid some CHACHAs ...

HI,HI,HI !

Thank you, thank youuuu, when I done them I use TESTOR spray paint with the mat finish to create the tones !

Here is my latest bits of progress on this one… First I airbrushed on white primer where the white ETO ID markings will be applied on the tail and cowling. The next day I airbrushed on Tamiya Gloss white to those areas Yesterday in the morning I masked off the white ID markings will be areas, and also the wheel wells Then in the afternoon I airbrushed on the Olive Drab 41 and Neutral Gray 43 using AK Real Colors I need to go back and do some touch up on the OD and NG, then I can get the gloss coat on for decals… more to come in a few days…

In doing what I can 😜

Very cool vehicles and nicely built too! I especially like the metallic ones, as they're not overly bright and seem to fit the look of "test" vehicles. What silvers did you use? Gil

What he said! Well done. Sort of like the US WC 62!

HI ! Here another project I been working on for a couple of years, now is the AVROCAR PROGRAM , not much people know that this program started by selling the ideal to create a flying saucer for the USAF and US ARMY , when US military officials visited the AVRO CF-105 ARROW program in MALTON ONTARIO , One of the main AVRO enginer 'Mr JOHN FROST' offer to US OFFCIAL to visit a secret test lab , where AVRO CANADA was working on VTOL project call Y1.. when they saw it the US OFFICIAL came back with an offer to subsadize the program , this project was call PROJECT 1794 SILVER BUG ..While working on the program , AVRO build a smaller version of the propose propulsion VIPER ENGINE , this version was call the AVROCAR , If you like to view more pics just follow these links: AVRO Y1 ( project US OFFICIAL saw at AVRO CANADA MALTON ,PLANT ) https://photos.app.goo.gl/ERhUtBqwV9pthSRx7 AVRO PROJECT 1794 (FLYING SAUCER project propose to US OFFCIAL) https://photos.app.goo.gl/Qy86TXs2uK4S1rCh6 VIPER ENGINE TEST SITE (IN PROGRESS) https://photos.app.goo.gl/a4U68zGFD4hUm1m88 AVROCAR VZ-9 PROTOTYPE 1 in is original airframe with the GROUND EFFECT JIG TEST site https://photos.app.goo.gl/BBQgQQuk8v2JQBPVA AVROCAR VZ-9 PROTOTYPE 2 in is last test airframe before cancellation on is test site at AVRO CANADA plant https://photos.app.goo.gl/CQR663YQcvpAuh4x5 CAE AVROCAR FLIGHT SIMULATOR ( IN PROGRESS) https://photos.app.goo.gl/Qy86TXs2uK4S1rCh6 Since this is an ongoing project they will be more to see later on , and I plan to upgarde it with completed and new projects Enjoy Jmarc