TimDarrah Posted June 6, 2009 Report Share Posted June 6, 2009 I'm in the mood to do one of the Aggressors from the Two-Bobs sheet #72-002. They are a Block 30/32 F-16C with the Pratt F100 engine. Which kit do I need to use for this type of "Dart"? I have the 1/72nd Hasegawa F-16C #603, will that work? Thanks, Link to comment Share on other sites More sharing options...
Ralph Nardone Posted June 7, 2009 Report Share Posted June 7, 2009 Use either the Revell AG 50/52 or the identical Monogram kit. The parts for both the NSI/F100 and the MCID/F110 are included in the kits. These are perhaps the best multi-task F-16 kits in 1/72 scale, the only thing they lack are the proper bulged MLG doors for the 50/52! Kit numbers: Revell AG 4633 Monogram 85-5309 If you can't find either of those (and they can be hard to locate), the Hasegawa F-16CG/CJ kits (00169, 00631, 00448, 0370) will get you there. Kit 00603 is a Block 25 out of the box. Be sure of which inlet/exhaust combination the airplane you want to model had--some Block 30's were a mish-mash of MCID/F100. There used to be a great website that detailled the differences at http://www.habu2.net/vipers, but it seems to have gone U/A in the past year or so....you might inquire at ARC. Ralph Link to comment Share on other sites More sharing options...
TimDarrah Posted June 7, 2009 Author Report Share Posted June 7, 2009 Thanks for the info, I have a few of those CJs on hand Link to comment Share on other sites More sharing options...
Recommended Posts