Wolfman63 Posted 1 hour ago Report Posted 1 hour ago This next build is the Revell 1/426 scale USS Arizona BB-39. I will be building it as she looked before the attack at Pearl Harbor on December 7th 1941. I will be using the Gold Medal Models photo etch detail set, Model Monkey 3D printed turrets to replace the kit versions, and some 3D printed O2U Kingfishers to replace the kit Curtiss Bi-planes. This will be displayed next to a Bradford Exchange USS Arizona Memorial sculpture that I received a number of years ago as a gift. I chose the Revell kit because the length of the kit is the same length as the sculpture. I started this build with the hull. I first drilled out all the portholes on the sides and opened up the anchor and mooring holes on the bow. I then removed the molded in railings. The two halves fit were not as bad as I thought it would be. The seam still required putty but was surprisingly close so not much was needed. I then removed the molded in anchor chains as these will be replaced with real chains. At this time I ordered some other items. The first was the Legends of Warfare book by David Doyle on the USS Arizona. The second items I ordered were the 1/426 USN Vought OS2U Kingfisher Seaplane Set from Distefan. These are 3D printed aircraft. I ordered these because the kit only supplies the Curtis Bi-planes which were replaced in January of 1941. I then needed to remove the molded in railings and gun shields as these are being replaced with photo etch detail parts. I also removed the molded in stairs as well. It took a few days to carefully remove them so I am currently working on the photo etch parts now. I will then work on the numerous upper decks that have the plastic railings and replacing them. You can see all the photos and details from the start in the build log at: https://davidsscalemodels.com/build-log/1-426-uss-arizona-bb-39/
Recommended Posts