Jmarc Posted July 23, 2024 Report Posted July 23, 2024 Hi ! Here another project I been working on ! Before the CF-105 ARROW , Avro CANADA as propose several design to the Canadian government under the C.104 file, So Here is the first project ..one of the JUNE 1952 proposal , it was call C.104/1 and C.104/1T .. an single and 2 seat interceptor .Since there is quite a similarity with the CONVAIR F-102 / 106 aircrafts I,ll using the MONOGRAM kits as base !.. So here where I'm at If you like to view the complete WIP on this project just follow this GOOGLE link https://photos.app.goo.gl/DqfQCQDdoWNDuIIg1 Hope youl,le enjoy the built Jmarc
Jmarc Posted July 23, 2024 Author Report Posted July 23, 2024 Thanks for following the WIP ..here is the latest advance on the project ! AVRO C.104 SINGLE SEAT (JUL 23th) today I stated the work on the second intake ! If you like to view the complete WIP on this project just follow this GOOGLE link https://photos.app.goo.gl/DqfQCQDdoWNDuIIg1 Hope youl,le enjoy the built Jmarc 1
Jmarc Posted October 10, 2024 Author Report Posted October 10, 2024 Thanks for following the WIP ..here is the latest advance on the project ! (SEPT 05th) today I sanded the work done last time ,apply another coat of putty to both intake ! If you like to view the complete WIP on this project just follow this GOOGLE link https://photos.app.goo.gl/DqfQCQDdoWNDuIIg1 Hope youl,le enjoy the built Jmarc 1
Jmarc Posted October 16, 2024 Author Report Posted October 16, 2024 Thanks for following the WIP ..here is the latest advance on the project ! (OCT 16th) today I sanded the work done the last time and apply some putty on the intakes ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc 1
Jmarc Posted October 17, 2024 Author Report Posted October 17, 2024 YYYYYYYYYou bet , it give the tine for the oputty to settle down properly !
Jmarc Posted October 31, 2024 Author Report Posted October 31, 2024 Thanks for following the WIP ..here is the latest advance on the project ! (OCT 31st) today I sanded the work done the last time and apply some putty , I continue the work on the tail fin ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
Jmarc Posted November 2, 2024 Author Report Posted November 2, 2024 10 hours ago, Pepenador said: Congrats... you are courageous!!! Thnaksssssss.. not realy , just love a gfood challenge ..lol
Jmarc Posted January 10, 2025 Author Report Posted January 10, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (JAN 10th) today I sanded the work done the last time and apply some putty ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
ghodges Posted January 11, 2025 Report Posted January 11, 2025 Good "olde skool" use of plastic and putty! Gil
Jmarc Posted January 11, 2025 Author Report Posted January 11, 2025 3 hours ago, ghodges said: Good "olde skool" use of plastic and putty! Gil YYYYYYYYYou got it right !
Jmarc Posted February 25, 2025 Author Report Posted February 25, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (FEB 25th) today I completed the cockpit side walls and apply some putty , I also wok on the tail half cones ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
ghodges Posted February 25, 2025 Report Posted February 25, 2025 I can appreciate the elbow grease you're having to apply to this build! Gil
Jmarc Posted February 25, 2025 Author Report Posted February 25, 2025 32 minutes ago, ghodges said: I can appreciate the elbow grease you're having to apply to this build! Gil HI,HI,HI ... you bet ...sand on , sand off danielsan..lol
Jmarc Posted May 16, 2025 Author Report Posted May 16, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (MAY 16th) today I completed the control panel and glued it into place ! ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc 1
Jmarc Posted June 12, 2025 Author Report Posted June 12, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (JUN 12th) today I start the work on the windshield !! If you like to view the complete WIP of this project photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
Jmarc Posted July 10, 2025 Author Report Posted July 10, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (JUl 10th) today It began with an CHACHA ,so I repair the nose and continue the blending of the windshield ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc 1
ghodges Posted July 11, 2025 Report Posted July 11, 2025 Have you tried using an epoxy putty like ApoxySculp as a filler/blender instead of the old red autobody putty? It's advantage is that the excess can be wiped away and smoothed with a wet finger which really cuts down on the needed sanding. Just a suggestion! Gil
Jmarc Posted July 11, 2025 Author Report Posted July 11, 2025 6 hours ago, ghodges said: Have you tried using an epoxy putty like ApoxySculp as a filler/blender instead of the old red autobody putty? It's advantage is that the excess can be wiped away and smoothed with a wet finger which really cuts down on the needed sanding. Just a suggestion! Gil HI ! Thanks for the info .. yes I did and wasn.nt to impress with the result so I when back to my old car putty love ..lol 1
Jmarc Posted July 31, 2025 Author Report Posted July 31, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (JUL 31st) Today , I sanded the work done last time and apply more putty ,I also done the last frame on the windshield , finaly start the work to equalize the landing gear bay ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc 1
Jmarc Posted September 18, 2025 Author Report Posted September 18, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (SEPT 17th) Today , I start the work in the nose bay ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
Jmarc Posted November 11, 2025 Author Report Posted November 11, 2025 Thanks for following the WIP ..here is the latest advance on the project ! (NOV 11th) Today , I sanded the work done last time and apply more putty to the landing gear area, also started to complete the wing ingraving ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
ghodges Posted November 11, 2025 Report Posted November 11, 2025 These pics should be in the dictionary under the definition of "Major Conversion"! Gil
Jmarc Posted January 27 Author Report Posted January 27 Thanks for following the WIP ..here is the latest advance on the project ! (JAN 27th) Today , I completed the rudder section scribbling and started the fuselage ! If you like to view the complete WIP of this project https://photos.app.goo.gl/89TgFWzqzKY6KcjE6 ........You been following this post and like to view all the AVRO CANADA projects I have completed so far .. just follow this Google link: https://photos.app.goo.gl/FpZs5m3ic3c3eL329 Hope youl,le enjoy the built Jmarc
Recommended Posts