Dick Montgomery Posted June 4, 2011 Report Share Posted June 4, 2011 Apologies to Ian Fleming, especially since the actions are reversed, but: A very knowledgable friend of mine informed me that I should not shake acrylic paint prior to use. He said something about the action generating bubbles and causing the pigment to fall out of suspension...or some other chemcial type of gibberish which I did not understand. Perhaps I've been causing problems with Acrylic and didn't know it.... Comments? Link to comment Share on other sites More sharing options...
jcorley Posted June 4, 2011 Report Share Posted June 4, 2011 I use Gunze, Tamiya, Vallejo and Polly Scale and haven't had a problem with their paints after shaking the bottles. If you're using Testors Acryl, all bets are off. That stuff was so bad I couldn't sell it and killed the rack in favor of WEM paints about 5 years ago. Testor - if you can't make a superior product than your competitors, buy them out and kill the line! (Floquil Military and Polly Scale) Link to comment Share on other sites More sharing options...
dmorrissette Posted June 4, 2011 Report Share Posted June 4, 2011 Dick: Wilm it generate bubbles- yes. All paints will when shaken or stirred. Are acylics worse, yes based on the fact water has a lot to do with them but they also contain additives to defoam themselves. None of this will affect the pigments or will have them come out Dave Link to comment Share on other sites More sharing options...
Dick Montgomery Posted June 5, 2011 Author Report Share Posted June 5, 2011 Thanks... I guess I'll try an experiment... I'll just grab some paints randomly, not disturb their slumber, and shoot them on some scraps.... but my level of painting is such that even my best effort may not be distinguishable from "bad" paint! Link to comment Share on other sites More sharing options...
JohnRatzenberger Posted June 5, 2011 Report Share Posted June 5, 2011 What Dave M said. I have seen comments that shaking acrylics may cause them to dry quicker, thus increasing chance of clogging. I've taken a middle road, acryl & enamel. I keep 3 BB shot in each bottle/tin/etc and I shake a bit just to get things loosen up -- then I stir them, mostly to be sure the paint-paint is off the bottom/sides and that I'm not bringing up lumps .... Link to comment Share on other sites More sharing options...
DennisTennant Posted June 5, 2011 Report Share Posted June 5, 2011 Having just finished the latest Vallejo/Mig video on painting with acrylics, they sure were shaking their bottles vigorously before using.... I use an old Robart paint shaker to do the job since most of my paints are now Vallejo...with no problems. That said, I do both. I stir Tamiya and shake Vallejo. Link to comment Share on other sites More sharing options...
Recommended Posts