802chrisg Posted April 25, 2010 Report Share Posted April 25, 2010 Hi all, Here is different and easy way to fill holes, seams, etc.. As a carpenter I use light weight spackling compound every day to fill nail hole etc.. A year ago I tried it on a model, worked great. Now I use it all the time. It sands easy and is easy to apply. Try it on the underside of a tank first to see if you like or not. The cost is cheap. There are sereral different makers. DAP is the most common. Hope this helps. Happy modeling. Did you notice that I didn't put this on the gerenal tip forum. Didn't want to give any AIR-planehead any good info . Enjoy, Chris Graeter Treadhead Colchester, VT Link to comment Share on other sites More sharing options...
Mark Aldrich Posted April 25, 2010 Report Share Posted April 25, 2010 Chris, Good call on posting it here. We definatley don't want to give the airheads any more information and help than they already get. Like having the majority of the hobby catering to their wants and needs. Mark Link to comment Share on other sites More sharing options...
802chrisg Posted April 25, 2010 Author Report Share Posted April 25, 2010 Chris, Good call on posting it here. We definatley don't want to give the airheads any more information and help than they already get. Like having the majority of the hobby catering to their wants and needs. Mark Well said Mark, Well said. Chris Graeter Link to comment Share on other sites More sharing options...
Mark Deliduka Posted April 25, 2010 Report Share Posted April 25, 2010 Interesting. I may have to try that someday. As a carpenter, I have some of that stuff laying around as well. And this really belongs in the "Tips & Techniques" Forum, but if you are protecting "state secrets" then I understand...... Link to comment Share on other sites More sharing options...
TimHortman Posted April 26, 2010 Report Share Posted April 26, 2010 Do you find that this holds well? I would be afraid that it would dry/crack over time. I've used enough of the stuff around the house, but never on a model... Thanks for the tip! Link to comment Share on other sites More sharing options...
DennisTennant Posted April 26, 2010 Report Share Posted April 26, 2010 Moving this to where it belongs...tips and techniques. Link to comment Share on other sites More sharing options...
802chrisg Posted April 26, 2010 Author Report Share Posted April 26, 2010 (edited) Tim, Yes I find that it holds up well and does not crack. I would not use it to fill a large holes or cracks. Dennis, You moved this on me, Now all the plane guys are going to know this treadhead secret. Oh I seeeee you are a plane guy. RATS the secret is out. Oh well enjoy. Chris Graeter IPMS #39558 Colchester, VT Edited April 26, 2010 by 802chrisg Link to comment Share on other sites More sharing options...
ClareWentzel Posted April 26, 2010 Report Share Posted April 26, 2010 Some of us Plane Modelers already knew about this material. I use it all the time for small filling. It seems to work well for me. Nice thing about Spackling Compound is that it can be cleaned up with a wet q-tip. I usually cover it with a coat of Mr. Surfacer to strengthen the material. Link to comment Share on other sites More sharing options...
DennisTennant Posted April 26, 2010 Report Share Posted April 26, 2010 Dennis, You moved this on me, Now all the plane guys are going to know this treadhead secret. Oh I seeeee you are a plane guy. RATS the secret is out. Oh well enjoy. Chris Graeter IPMS #39558 Colchester, VT Sorry Chris, some tips are too good to hide! Link to comment Share on other sites More sharing options...
Keith Pruitt Posted April 26, 2010 Report Share Posted April 26, 2010 When it comes to filling seams, most plane guys have tried virtually every substance known to man...including spackling paste, auto body filler putty, baking soda & cyanoacrylates, acrylic fingernail filler (Walmart for $5, in the aisle with the fingernail polish...yes, I have followed my wife into that aisle rather than lose sight of her in the store), epoxy putty, and Georgia Red Clay mixed with spit. Link to comment Share on other sites More sharing options...
phantomordie Posted April 26, 2010 Report Share Posted April 26, 2010 Some of my best friends build armor but if you've seen one tank you've seen them all. Link to comment Share on other sites More sharing options...
DennisTennant Posted April 26, 2010 Report Share Posted April 26, 2010 Some of my best friends build armor but if you've seen one tank you've seen them all. And so it begins.... Link to comment Share on other sites More sharing options...
Mark Aldrich Posted April 26, 2010 Report Share Posted April 26, 2010 (edited) No No No.....I will be a good treadhead and not go there! Edited April 26, 2010 by Mark Aldrich Link to comment Share on other sites More sharing options...
802chrisg Posted April 27, 2010 Author Report Share Posted April 27, 2010 Some of my best friends build armor but if you've seen one tank you've seen them all. Oh John, That hurt!! But I had it coming. So as a good Treadhead I will take this glancing blow and press forward. You see that is why us treadheads have steel armour for protection , not thin sheets of aluiminum. I must admit that some of the best tips I use have come from plane guys. B) Chris Graeter IPMS # 39558 Colchester, Vt Link to comment Share on other sites More sharing options...
LesWalden Posted April 27, 2010 Report Share Posted April 27, 2010 Back when I was a young modeler, we used candle wax to fill and customize cars. Only drawback was that it takes a lot of paint to cover it. How far we've come. Link to comment Share on other sites More sharing options...
phantomordie Posted April 27, 2010 Report Share Posted April 27, 2010 Our club moderator is a treadhead and he turns out some amazing work. That's Midstate Modelers in Asheboro N.C. Link to comment Share on other sites More sharing options...
Mark Aldrich Posted April 27, 2010 Report Share Posted April 27, 2010 The best tip I learned (from an airplane guru) was FUTURE. I do all my glass with it now. Link to comment Share on other sites More sharing options...
Neptune48 Posted April 27, 2010 Report Share Posted April 27, 2010 Tim, Yes I find that it holds up well and does not crack. I would not use it to fill a large holes or cracks. Dennis, You moved this on me, Now all the plane guys are going to know this treadhead secret. Oh I seeeee you are a plane guy. RATS the secret is out. Oh well enjoy. Chris Graeter IPMS #39558 Colchester, VT Okay, but... How do you seal it so it accepts paint the same as a styrene surface? What glues stick to it? I've just started using Magic Sculp. It looks like Spackle when it dries, but it's a two-part workable epoxy. Link to comment Share on other sites More sharing options...
802chrisg Posted April 28, 2010 Author Report Share Posted April 28, 2010 Okay, but... How do you seal it so it accepts paint the same as a styrene surface? What glues stick to it? I've just started using Magic Sculp. It looks like Spackle when it dries, but it's a two-part workable epoxy. What I do is cover it with liquid cement. This seals it and hardens it at the same time. After that it take paint perfectly. A couple of times I forgot to seal it and it still took paint well. Chris Graeter IPMS # 39558 Link to comment Share on other sites More sharing options...
Neptune48 Posted April 28, 2010 Report Share Posted April 28, 2010 What I do is cover it with liquid cement. This seals it and hardens it at the same time. After that it take paint perfectly. A couple of times I forgot to seal it and it still took paint well. Chris Graeter IPMS # 39558 Thanks. Do you use CA or epoxy to attach styrene parts to it? Link to comment Share on other sites More sharing options...
802chrisg Posted April 28, 2010 Author Report Share Posted April 28, 2010 Thanks. Do you use CA or epoxy to attach styrene parts to it? CA glue. Chris Graeter IPMS A#39558 Link to comment Share on other sites More sharing options...
Neptune48 Posted April 28, 2010 Report Share Posted April 28, 2010 CA glue. Chris Graeter IPMS A#39558 Okay, thanks. Bruce Link to comment Share on other sites More sharing options...
Recommended Posts