tom Posted April 9, 2010 Report Share Posted April 9, 2010 My local hobby shop can't get Tenex 7R in stock. A short while back it was off the shelves for about 3 months and then was back. Have they stopped producing it? Link to comment Share on other sites More sharing options...
David M. Knights Posted April 9, 2010 Report Share Posted April 9, 2010 It is still being produced from what I understand. Link to comment Share on other sites More sharing options...
JeffS Posted April 9, 2010 Report Share Posted April 9, 2010 My local Hobby Shop couldn't get it towards the end of last year but now can get it regularly. Yeah They order from both Steven's and MMD Link to comment Share on other sites More sharing options...
llcoolray Posted April 9, 2010 Report Share Posted April 9, 2010 Nope, I beleive it's discontinued. Link to comment Share on other sites More sharing options...
SteveCollins Posted April 9, 2010 Report Share Posted April 9, 2010 I don't think so. From what I understand, the manufacturer had some difficulty procuring the bottles it's sold in last year. When he found another source, it became available again. My LHS keeps it in and restocks regularly. IF yours can't find it, MicroMark sells a product called SameStuff that is supposed to be chemically identical. Steve Link to comment Share on other sites More sharing options...
Mike Delano Posted April 9, 2010 Report Share Posted April 9, 2010 I don't think so. From what I understand, the manufacturer had some difficulty procuring the bottles it's sold in last year. When he found another source, it became available again. My LHS keeps it in and restocks regularly. IF yours can't find it, MicroMark sells a product called SameStuff that is supposed to be chemically identical. Steve I don't know - I've ordered the 'Same Stuff' equivalent of ProWeld, and it was definitely not the same stuff. Either that, or I just got a bad batch of it... Link to comment Share on other sites More sharing options...
DavidF Posted April 9, 2010 Report Share Posted April 9, 2010 I sent an inquiry about Tenex 7R to Sprue Brothers and here's their response - "We will tell you as soon as someone tells us. We are in the same boat you are." Link to comment Share on other sites More sharing options...
Glynyrd Posted April 14, 2010 Report Share Posted April 14, 2010 Glad I panic bought last year Glenn Link to comment Share on other sites More sharing options...
ghodges Posted April 14, 2010 Report Share Posted April 14, 2010 (edited) Give it up! Go here: Visit My Website Order the Weld-On #4 in BULK. For $30-$50 you can get several CANS of weld cement, which translats into DOZENS of "bottles" of Tenax. This stuff is just as good (better in MHO) as Tenax. Take the stress out of worrying what glue you'll use and whether it''ll be available. Cheers! GIL Edited April 19, 2010 by ghodges Link to comment Share on other sites More sharing options...
Weedeater Posted April 19, 2010 Report Share Posted April 19, 2010 Give it up! Go here: http://forum.ipmsusa3.org/index.php?act=po...f=31&t=3421 Order the Weld-On #4 in BULK. For $30-$50 you can get several CANS of weld cement, which translats into DOZENS of "bottles" of Tenax. This stuff is just as good (better in MHO) as Tenax. Take the stress out of worrying what glue you'll use and whether it''ll be available. Cheers! GIL Gil, your link takes me right back to this thread to post a reply. Can you please double check it. Thanks for the tip too. Model on, Brother of the Sprue. Link to comment Share on other sites More sharing options...
PeteJ Posted April 19, 2010 Report Share Posted April 19, 2010 Gil, your link takes me right back to this thread to post a reply. Can you please double check it. Thanks for the tip too. Model on, Brother of the Sprue. Weld-on can be purchased at any commercial plastics fabricator. Just google "Plexiglas" and your city and you should come up with a local sales point. Worst case try the yellow pages. This stuff is used to make clear displays of all kinds. I actually prefer Weld-on 3. It sets a little faster. It sells for about $15 a pint. I have a small 4oz can that I use on the bench. If you leave the lid off it evaporates very quickly, and sometimes I forget to cap it. Better a couple of oz. gone that a pint. By the way, it is not legal in all areas. LA, San Bernardino, and Orange counties won't let you buy it. Check your local zoning VOC codes. Having said that, it is really as good as Tenax and at $15 a pint, a whole lot cheaper. A pint should last for years. Link to comment Share on other sites More sharing options...
DavidF Posted April 19, 2010 Report Share Posted April 19, 2010 (edited) Squadron is showing Tenex 7r as in stock - http://www.squadron.com/ItemDetails.asp?item=TN007 Edited April 19, 2010 by Dave23 Link to comment Share on other sites More sharing options...
ghodges Posted April 19, 2010 Report Share Posted April 19, 2010 Thanks or the heads-up Ken. The link in my post above should now work properly. Wherever you get it, Weld-On 3 or 4 is the best stuff, IMHO. Cheers! GIL Link to comment Share on other sites More sharing options...
LesWalden Posted April 20, 2010 Report Share Posted April 20, 2010 I've used both Tenax and Weld On and like them both. Weld On is just easier to obtain. I remember reading the label on the Tenax bottle that said it could cause cancer in California. Thank goodness I live in Washington. Link to comment Share on other sites More sharing options...
PeteJ Posted April 20, 2010 Report Share Posted April 20, 2010 I've used both Tenax and Weld On and like them both. Weld On is just easier to obtain. I remember reading the label on the Tenax bottle that said it could cause cancer in California. Thank goodness I live in Washington. Heck, life in California has been shown to cause cancer! Just about anything with any solvent of any kind has that label when sold here. Typical case of gross over reaction in a highly litigious society. Link to comment Share on other sites More sharing options...
Recommended Posts