carmelin1 Posted August 20, 2008 Report Share Posted August 20, 2008 Hi all, any Airliner modelers out there. I need some information on the Boeing 737's. Any one know of a good reference book or web site that describes the differencies between the -300,-500 and -700 models. In the photos I have found they don't look any longer as is obvious in the -800. Are they different inside maybe glass cockpit, seating arrangement. Or do they have upgraded engines. Need to know if a -700 can be made from a -500 or -300 model. Any help would be appreciated. Carl Link to comment Share on other sites More sharing options...
mvanschoonhoven Posted August 20, 2008 Report Share Posted August 20, 2008 Carl, Here is a start for you. I just glanced at it and think you might find some useful info. http://www.boeing.com/commercial/737family/ Mike Link to comment Share on other sites More sharing options...
DCrowe Posted August 20, 2008 Report Share Posted August 20, 2008 Hey Carl, What scale are you talking? I thought between Welsh, Hase, Revell, and Skyline pretty much everything was covered. Welsh has a new T-43A (737-200) in 72nd. Don Link to comment Share on other sites More sharing options...
Guest Chrgr440RT Posted August 20, 2008 Report Share Posted August 20, 2008 Try this one out. http://www.airliners.net/ look on the bottom right in the search drop down menu and you can bring up the specs for each incarnation. Link to comment Share on other sites More sharing options...
Ralph Nardone Posted August 20, 2008 Report Share Posted August 20, 2008 Hi all, any Airliner modelers out there. I need some information on the Boeing 737's. Any one know of a good reference book or web site that describes the differencies between the -300,-500 and -700 models. In the photos I have found they don't look any longer as is obvious in the -800. Are they different inside maybe glass cockpit, seating arrangement. Or do they have upgraded engines. Need to know if a -700 can be made from a -500 or -300 model. Any help would be appreciated. Another resource is the Airliner Modelling Digest at Yahoo Groups. Under the files section (you'll have to register to have access), there is a veritible cornucopia of conversion information. http://groups.yahoo.com/search?query=airliner+modeling The basics of the Boeing 737, and the kits to use in 1/144 scale: The -200 is a lengthened -100. Use the Airfix kit with fuselage mods as required. The -400 is a lengthened -300 and the -500 is a shortened -300 (the -500 was intended as a -200 replacement, or so I once read). Use the Daco kits, or the Minicraft kits. Daco's fuselage is shaped better.... The -600, -700, and -900 are all based on the -800 with shorter or longer fuselages. Use the Revell AG kit, modified as appropriate. In order to build a -700 in 1/144 scale, start with the Revell 737-800 kit and make the following cuts to the fuselage: Forward of the wing, but aft of the baggage hold door: Remove 18.7mm (0.74") Aft of the wing, but forward of the baggage hold door: Remove 19.75mm (0.78") Remove the tail bumper and fill the hole. Add filler as needed. Now, if you want to make life easy, check out Contrails Models: http://www.drawdecal.com/contrails.htm The choice is yours.... In 1/72 scale, Welsh/Proteus did some mixed media kits of the MidGen 737's that were quite nice. Aurora did a so-so 1/72 kit of the Classic 737. I don't think anyone has done 1/72 kits of the NextGen 737's yet.... Hasegawa has done several 1/200 737's, ranging from the -200 to the -300 or -400. I don't do narrowbodies in 1/200, so someone else will have to elaborate. Ralph Link to comment Share on other sites More sharing options...
David M. Knights Posted August 20, 2008 Report Share Posted August 20, 2008 Another resource is the Airliner Modelling Digest at Yahoo Groups. Under the files section (you'll have to register to have access), there is a veritible cornucopia of conversion information. http://groups.yahoo.com/search?query=airliner+modeling The basics of the Boeing 737, and the kits to use in 1/144 scale: The -200 is a lengthened -100. Use the Airfix kit with fuselage mods as required. The -400 is a lengthened -300 and the -500 is a shortened -300 (the -500 was intended as a -200 replacement, or so I once read). Use the Daco kits, or the Minicraft kits. Daco's fuselage is shaped better.... The -600, -700, and -900 are all based on the -800 with shorter or longer fuselages. Use the Revell AG kit, modified as appropriate. In order to build a -700 in 1/144 scale, start with the Revell 737-800 kit and make the following cuts to the fuselage: Forward of the wing, but aft of the baggage hold door: Remove 18.7mm (0.74") Aft of the wing, but forward of the baggage hold door: Remove 19.75mm (0.78") Remove the tail bumper and fill the hole. Add filler as needed. Now, if you want to make life easy, check out Contrails Models: http://www.drawdecal.com/contrails.htm The choice is yours.... In 1/72 scale, Welsh/Proteus did some mixed media kits of the MidGen 737's that were quite nice. Aurora did a so-so 1/72 kit of the Classic 737. I don't think anyone has done 1/72 kits of the NextGen 737's yet.... Hasegawa has done several 1/200 737's, ranging from the -200 to the -300 or -400. I don't do narrowbodies in 1/200, so someone else will have to elaborate. Ralph Daco is the way to go for the -300 400 and 500 series a/c. Link to comment Share on other sites More sharing options...
carmelin1 Posted August 20, 2008 Author Report Share Posted August 20, 2008 Thanks everyone. I am planning to do a few Southwest Airlines Aircraft in the different paint Schemes in 1/144 scale. I ordered the Daco Skyline 737-500 and 2 737 300.s I also want to do a 737-700 but wasn't able to find a kit in 1/144. I have the Revell 737-800 and it looks longer then any pictures I have seen of Southwest Acft. Thanks David that is exactly the info I was looking for. I think the -800 will become a -700. Looks like I will be busy on the internet looking through all those sites. Thanks again everyone. Carl Link to comment Share on other sites More sharing options...
David M. Knights Posted August 21, 2008 Report Share Posted August 21, 2008 Thanks everyone. I am planning to do a few Southwest Airlines Aircraft in the different paint Schemes in 1/144 scale. I ordered the Daco Skyline 737-500 and 2 737 300.s I also want to do a 737-700 but wasn't able to find a kit in 1/144. I have the Revell 737-800 and it looks longer then any pictures I have seen of Southwest Acft. Thanks David that is exactly the info I was looking for. I think the -800 will become a -700. Looks like I will be busy on the internet looking through all those sites. Thanks again everyone. Carl Where are you getting the decals? Jet from Poland made some at one time. Apparently they are hard to come by now. I have a few of the sheets. Southwest seems reluctant to license a decal manufacturer to do decals of their birds. It is a shame. BTW, if you want a real eyecatcher, early in their history, Southwest briefly operated a single 727. It looks odd in the Southwest scheme. If you need any reference shots of SWA 737s, let me know. My wife is a SWA F/A and I have shot lots of pictures of those birds. Link to comment Share on other sites More sharing options...
VonL Posted August 21, 2008 Report Share Posted August 21, 2008 ...Welsh has a new T-43A (737-200) in 72nd... AAAUUUGGGHHH!!!! Gotta have it! Are they gonna do a T-29 version of the Convair? CHEERS! Bob Link to comment Share on other sites More sharing options...
carmelin1 Posted August 22, 2008 Author Report Share Posted August 22, 2008 Thanks David, I ordered 2 sets trom Scaleliners one each -300,-500 Classic color scheme and the same Canyon Blue scheme. I also ordered Jet 737-300 AZ state flag scheme. I ordered some Boeing Gray, Canyon Blue and SW Gold from Xtra color. Any referencies or suggestions for the rest of the colors I think there Orange and Red would be appreciated. Link to comment Share on other sites More sharing options...
David M. Knights Posted August 22, 2008 Report Share Posted August 22, 2008 Thanks David, I ordered 2 sets trom Scaleliners one each -300,-500 Classic color scheme and the same Canyon Blue scheme. I also ordered Jet 737-300 AZ state flag scheme. I ordered some Boeing Gray, Canyon Blue and SW Gold from Xtra color. Any referencies or suggestions for the rest of the colors I think there Orange and Red would be appreciated. Can you point me to the Scaleliners website? I mixed my own SW Gold. I used an Insignia Red. Link to comment Share on other sites More sharing options...
carmelin1 Posted August 22, 2008 Author Report Share Posted August 22, 2008 Can you point me to the Scaleliners website? I mixed my own SW Gold. I used an Insignia Red. David go to the Hannents web site http://www.hannants.co.uk/ and do a search 1/144, Boeing 737, Decals, or just 1/144, 737 and they will come up. They show them as low stock so hurry. Hannents is the only place I have been able to find them. They also have the Daco kits abd some Jet decals. It's painfull that the rate is $1.86 to the Pound Sterling. Link to comment Share on other sites More sharing options...
Ralph Nardone Posted August 22, 2008 Report Share Posted August 22, 2008 Russell Brown at Airline Hobby Supplies also has the Daco kits: http://www.airline-hobby.com/shop/index.cf...amp;Category=18 Ralph Link to comment Share on other sites More sharing options...
Recommended Posts