Wolfman63 Posted January 29, 2022 Report Share Posted January 29, 2022 The next build is the 1/48 Tamiya P-478D Razorback. This is another commission build. The scheme will be replicating the “Gail Ann” of the 381th Fighter Group, 19th Fighter Squadron at Isley Field, Saipan.For this build I will be using Eduard’s photo etch detail set and Master Model brass gun barrels. The decals will need to be custom made for the specific aircraft. Starting with the cockpit I used photo etch accessories for the pedals, cockpit floor, instrument panel and the side walls. The cockpit was painted Vallejo US Interior green and then all the equipment and switches were painted. The floor and walls were slightly weathered and then the cockpit was assembled. One of the other additions that the photo etch set provides are the ducts for the side vents. The kit just leaves it open to the fuselage. The duct work were bent and fitted inside each side of the fuselage. The yellow chromate was then painted for the inside of the ducts and the inside of the tail wheel bay. I was able to install the fuselage and am now getting ready to build and detail the engine. Check out more photos and details in my build log at https://davidsscalemodels.com/build-log/1-48-p-47d-razorback-gail-ann/ 1 Link to comment Share on other sites More sharing options...
PaulBradley Posted January 30, 2022 Report Share Posted January 30, 2022 Nice work, David! Link to comment Share on other sites More sharing options...
Bradley25mm Posted January 30, 2022 Report Share Posted January 30, 2022 Another great start David! Can’t wait to see more progress updates. Chris Link to comment Share on other sites More sharing options...
ghodges Posted January 31, 2022 Report Share Posted January 31, 2022 Sharp! Gil Link to comment Share on other sites More sharing options...
EdCarr Posted February 1, 2022 Report Share Posted February 1, 2022 Tell me you are looking through a magnifying glass while painting the details, lol 🙂 ! Phenomenal work on the cockpit detail. I love the light weathering! Link to comment Share on other sites More sharing options...
Mark Deliduka Posted February 1, 2022 Report Share Posted February 1, 2022 Way to go man! Looks like a contest contender in the making! You're doing a Masterful job on all those details! Link to comment Share on other sites More sharing options...
johneaton Posted February 2, 2022 Report Share Posted February 2, 2022 (edited) Very nice work on the dials and switches, David. Not too sure you be able to see the ducts, though🙂 Edited February 2, 2022 by johneaton Link to comment Share on other sites More sharing options...
Wolfman63 Posted February 5, 2022 Author Report Share Posted February 5, 2022 (edited) This week I spent time assembling and detailing the engine, assembling the fuselage and wings and started assembling and detailing the landing gear. Starting on the engine the first thing I noticed was the molded pushrods for the cylinders. Using a hobby knife I cut out the pushrods. I then used 30 AWG black wire and cut pieces the length of the pushrods and installed them with the photo etch wire looms. The cylinders were painted using Vallejo’s metal series dark aluminum with aluminum on the valve covers. With the cylinders assembled together I added the photo etch wiring and routed them to the front and rear of the cylinders. The front part of the engine was then painted gray with silver bolt heads. The engine logo and engine ID plate decals are from the Thunder Cals Thunderbolt Insignia and Data Decal set (#48005). I then painted the cowl and installed the engine assembly. Moving onto the fuselage and wings I used photo etch details on the main gear bays and fuselage duct covers. The nose assembly was mounted to fuselage and the horizontal stabilizers. The overall scheme for this squadron is olive drab overall but the cowl, tail and horizontal stabilizers are near metal finish (NMF) with blue highlights. I sprayed all the NMF areas with Testors bare metal and the blue highlights I am using Model Master True Blue. The wings were then assembled and attached to the fuselage. The Aber gun barrels were then installed. The brass barrels have a lip on one end so they need to be installed from the back side. The assembly is installed and the barrels are pushed in until they hit the stops inside the wing. The bomb racks were detailed and installed under the wings. The main gear struts required a little putty due to ejection marks and the holes for the control arms were filled as these were replaced with photo etch parts. The struts were painted with Vallejo metal series Duraluminum which gives the struts a slightly dirty appearance. For the wheels I am using the hub covered version. I need to finish installing the landing gear and doors and am currently working on the “Gail Ann” specific decals that I need to make. Check out more photos and details in my build log at https://davidsscalemodels.com/build-log/1-48-p-47d-razorback-gail-ann/ Edited February 5, 2022 by Wolfman63 Link to comment Share on other sites More sharing options...
Mark Deliduka Posted February 8, 2022 Report Share Posted February 8, 2022 Excellent work! This is coming along nicely! Link to comment Share on other sites More sharing options...
ghodges Posted February 9, 2022 Report Share Posted February 9, 2022 Those are some nice enhancements to a great kit. Git 'er done! Gil Link to comment Share on other sites More sharing options...
catdude01 Posted February 9, 2022 Report Share Posted February 9, 2022 fantastic progress, love the quality of the details. 😀 Link to comment Share on other sites More sharing options...
Wolfman63 Posted February 12, 2022 Author Report Share Posted February 12, 2022 Welcome to week two on the Gail Ann. Starting off with this week’s work, I finished detailing the main landing gear by adding photo etch lines. The tail wheel was installed and the photo etch replacement gear doors were installed. I then spent an evening making the Gail Ann specific decals. On a few of the reference photos it shows the main gear had hub caps. These had a design on them. After some research I found out they were red, white, and blue. I duplicated the pattern and scaled them for the main gear hubs. I also made all the other decals as well. I just need to verify the “Gail Ann” matches the rest of the blue on the aircraft. Since the blue on the aircraft is glossy I coated them with a coat of Vallejo matte finish. This is because the flat tends to change the hue of the color and I needed the slight shift so I can color match the nose decals. I also purchased some resin drop tanks. The drop tanks in the kit were typical of European Theater but the Pacific theater they typically used a 75-gallon vertical seam style drop tank. I then started working on the bombs. The fins on the kit bomb are too thick and small for the bomb and the photo etch set includes fins. Once they were bent into shape and the kit ones cut off I learned that the back of the bomb is too small for the fins. I used some styrene tubing and made a sleeve for the fins. Once assembled the bomb now looks like the reference photos. I started painting all the base coats of neutral gray underside with olive drab, NMF, and blue on the aircraft. For this next week I will be adding the decals then working on the canopy. If all goes well, I may have this completed by next weekend. Check out more photos and details in my build log at https://davidsscalemodels.com/build-log/1-48-p-47d-razorback-gail-ann/ Link to comment Share on other sites More sharing options...
ghodges Posted February 13, 2022 Report Share Posted February 13, 2022 That's looking really nice and it's not even done! Gil Link to comment Share on other sites More sharing options...
Wolfman63 Posted February 19, 2022 Author Report Share Posted February 19, 2022 The “Gail Ann” is now completed! The final week started off with adding the decals. The aircraft was then weathered slightly with pastel chalk and then sealed with a matte finish. The HUD was then modified by cutting off the thick gun sight and replacing it with a piece of clear acetate. With the sight installed the armored glass for was then added to the windscreen. I assembled the correct propeller, painted, decals added, and installed it. The wingtip lights were installed and the recognition lights under the starboard wing were finished off. EZ-Line was used to add the antenna. The gun barrels were painted with steel. The last detail I did was to cut off the rear navigation light and replace it with a clear lens. This completed the aircraft! The end of the week I assembled the display case. I used the Scene-A-Rama “sand” sheet for the base. Once it was glued down I sprayed some dark sand to represent the edge of the taxi lane and some black staining on the areas around the aircraft that were high traffic as well as the supercharger exhaust area. I cut out an area for the nickel nameplate. I used nickel instead of brass for this so the nameplate would stand out a little better. I then drilled holes in the bottom of the aircraft wheels and installed metal pins in order to mount the aircraft in the display case. With the base finished off all that was left to do was add the clear cover completing this project. This will be packed up and shipped out the client this weekend. Thank you all for following along on this historic build of the Gail Ann as she was on Saipan in 1944. Check out all the photos and details from start to finish in my build log at https://davidsscalemodels.com/build-log/1-48-p-47d-razorback-gail-ann/ 2 Link to comment Share on other sites More sharing options...
ghodges Posted February 19, 2022 Report Share Posted February 19, 2022 Nice build! I really like that scheme...you get some great color to balance out the drab green/gray camo! Gil Link to comment Share on other sites More sharing options...
Mark Deliduka Posted February 19, 2022 Report Share Posted February 19, 2022 Brilliant job on that Jug David! Way to go! I also like the colors that stand out from the OD. Link to comment Share on other sites More sharing options...
EdCarr Posted February 27, 2022 Report Share Posted February 27, 2022 Did you apply pastel weathering effects with solid pieces of pastel chalk or crushed up pieces of pastel chalk brushed-on? I am simply curious as I would like to try using pastels as well in my weathering endeavors. I did not realize that pastels could be used to weather and then sprayed over with a dull coat to finish and seal everything. I would assume they would run ( an effect akin to spraying a chalk-covered black board with many drops of water) Great build though! I love the bare metal set against the olive drab. That scheme reminds me somewhat of a 1/72 scale P-47 I built as a youngster with a light, sky-blue and olive drab camo scheme on the top and bare metal or aluminum on the bottom. The plane was simply called, " Teddy." Also, I must say, I like the liquor bottle and tumbler glass a lot. Must help to mellow the nerves a bit 🙂 while building. Link to comment Share on other sites More sharing options...
Wolfman63 Posted February 27, 2022 Author Report Share Posted February 27, 2022 5 hours ago, EdCarr said: Did you apply pastel weathering effects with solid pieces of pastel chalk or crushed up pieces of pastel chalk brushed-on? I am simply curious as I would like to try using pastels as well in my weathering endeavors. I did not realize that pastels could be used to weather and then sprayed over with a dull coat to finish and seal everything. I would assume they would run ( an effect akin to spraying a chalk-covered black board with many drops of water) Great build though! I love the bare metal set against the olive drab. That scheme reminds me somewhat of a 1/72 scale P-47 I built as a youngster with a light, sky-blue and olive drab camo scheme on the top and bare metal or aluminum on the bottom. The plane was simply called, " Teddy." Also, I must say, I like the liquor bottle and tumbler glass a lot. Must help to mellow the nerves a bit 🙂 while building. I use solid pieces and use different brushes and swabs to apply it. Weathering with Pastel Chalk – David's Scale Models (davidsscalemodels.com) 1 Link to comment Share on other sites More sharing options...
EdCarr Posted March 7, 2022 Report Share Posted March 7, 2022 Thanks for the tip and the link to your site, I will check it out for sure! 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts