DennisTennant Posted September 14, 2009 Report Share Posted September 14, 2009 I read that tidbit in the instructions for my new Firefly kit. It says you can remove the seam lines on their DS track with a swipe of thinner across the tracks. Now, not wanting to ruin the only set of tracks I have for this 1/72 kit, has anyone here tried using thinner to remove the seam on anything made from Dragon's DS plastic? Did it really work? Link to comment Share on other sites More sharing options...
Ralph Nardone Posted September 14, 2009 Report Share Posted September 14, 2009 I read that tidbit in the instructions for my new Firefly kit. It says you can remove the seam lines on their DS track with a swipe of thinner across the tracks. Now, not wanting to ruin the only set of tracks I have for this 1/72 kit, has anyone here tried using thinner to remove the seam on anything made from Dragon's DS plastic? Did it really work? I wonder if the technique is similar to using liquid cement to eliminate fine mold marks. I have yet to play with one of DML's kits with DS tracks, but I might be prompted to do so shortly and find out if it works. What type of thinner do they say to use? R Link to comment Share on other sites More sharing options...
ghodges Posted September 14, 2009 Report Share Posted September 14, 2009 Ok, I'll own up to being ignorant (again)...waht is DS plastic, and how does it differ from styrene? Or is that just thier term; meaning Dragon Styrene? GIL Link to comment Share on other sites More sharing options...
Mark Aldrich Posted September 14, 2009 Report Share Posted September 14, 2009 Gil, It is a styrene plastic that can be glued together with any glue. The other plus is that is actually absorbs paint as opposed to having it sit on top of the tracks and flake off when it is bent. Mark Link to comment Share on other sites More sharing options...
Mike Delano Posted September 14, 2009 Report Share Posted September 14, 2009 DS Track is great - I wish Dragon would sell more of their DS Track sets separately. And yes - thinner will 'dissolve' the seam lines - I use Ambroid Pro Weld and it works wonders. Just make sure you use it in small amounts as opposed to one liberal stroke of thinner. For 1/72 DS track, you'll probably ant to use a smaller brush (I usually put my Pro Weld in an empty Tamiya Thin Cement bottle I kept - smaller bottle, smaller brush). Link to comment Share on other sites More sharing options...
Mark Aldrich Posted September 14, 2009 Report Share Posted September 14, 2009 I wish they would put out the T49 track seperately. Another one of those IDF used tracks. Mark Link to comment Share on other sites More sharing options...
DennisTennant Posted September 15, 2009 Author Report Share Posted September 15, 2009 I wonder if the technique is similar to using liquid cement to eliminate fine mold marks. I have yet to play with one of DML's kits with DS tracks, but I might be prompted to do so shortly and find out if it works. What type of thinner do they say to use? R That's my problem, they didn't say what kind of thinner! I don't want to experiment on the only set of tracks I have. Dragon doesn't sell the tracks separately...grr. Link to comment Share on other sites More sharing options...
JohnRatzenberger Posted September 15, 2009 Report Share Posted September 15, 2009 That's my problem, they didn't say what kind of thinner! I don't want to experiment on the only set of tracks I have. Dragon doesn't sell the tracks separately...grr. Ah, just turn it into a diorama with some shot-up track ... Link to comment Share on other sites More sharing options...
66Foxtrot Posted September 18, 2009 Report Share Posted September 18, 2009 Tamiya Thin Liquid Cement also works very well to dissolve the casting "ridges" on DS track and figures. Link to comment Share on other sites More sharing options...
afterburner Posted September 18, 2009 Report Share Posted September 18, 2009 Tamiya Thin Liquid Cement also works very well to dissolve the casting "ridges" on DS track and figures. Indeed, it works like a charm. I have even had success using it to remove pesky fine dust from rescribed panel lines. Disintegrates into thin air. Link to comment Share on other sites More sharing options...
Recommended Posts