StuartMont Posted July 24, 2021 Report Share Posted July 24, 2021 I was able to find some videos of building this model. Unfortunately I have not found any including posts, etc. that discuss the need to grind and smooth the areas with protrusions. There was a video of a person unpacking the 1/200 USS Missouri and the hull looked perfectly smooth, unlike this one. Is the need to deal with these areas expected and therefore not discussed? Thanks. Stuart Link to comment Share on other sites More sharing options...
EJS Posted July 24, 2021 Report Share Posted July 24, 2021 My 1/350 Tamiya model had similar surface defects. Sand and fill and sand. I did that after the hull was assembled and a few reinforcing strips were installed athwartships to keep the hull shape. I also build wood ships. Those kits are not kits in the plastic sense, with parts to be assembled, but more of a pile of materials used to make a ship, just like a real one was built. The newer models have more laser cut parts in them making them a bit more like kits, but all parts need fitting / shaping / sanding to fit. Link to comment Share on other sites More sharing options...
StuartMont Posted July 25, 2021 Author Report Share Posted July 25, 2021 Thanks so much for the response. Link to comment Share on other sites More sharing options...
Recommended Posts