Jump to content

Revell Ford Bronco


MWS

Recommended Posts

I was in Michaels looking for Flow Aid and I came across this kit in the limited model section.  I have done some of the sub assembly and freed the side windows from the frame.  I will post more pics as I accomplish more.  

WIN_20210209_18_38_17_Pro.jpg

WIN_20210209_18_42_49_Pro.jpg

WIN_20210209_18_46_22_Pro.jpg

WIN_20210209_18_48_13_Pro.jpg

WIN_20210209_18_48_57_Pro.jpg

PXL_20210222_015745361.jpg

 

PXL_20210427_002952143.jpg

PXL_20210427_002933961.jpg

PXL_20210427_002824408.jpg

PXL_20210427_002755528.jpg

PXL_20210427_002728937.jpg

Edited by MWS
Chassis almost complete
  • Like 1
Link to comment
Share on other sites

It has been a while since I have done anything on this project.  A four letter word got on the way, (WORK).  Anyway I decided to paint the frame metallic blue, Tamiya. Added a distributor, sparkplug wires and boots.  Wired up the coil and plumbed the vacuum line from the distributor.  

Link to comment
Share on other sites

On 4/26/2021 at 7:48 PM, MWS said:

It has been a while since I have done anything on this project.  A four letter word got on the way, (WORK).  Anyway I decided to paint the frame metallic blue, Tamiya. Added a distributor, sparkplug wires and boots.  Wired up the coil and plumbed the vacuum line from the distributor.  

Got any pics Mark? Glad you're back at it. 

Link to comment
Share on other sites

  • 3 months later...
  • 2 months later...

Sorry I didn't get back here for the finish but that looks like it turned out great!! Paint turned out awesome!!! 

Link to comment
Share on other sites

On 11/5/2021 at 5:57 AM, mustang1989 said:

Sorry I didn't get back here for the finish but that looks like it turned out great!! Paint turned out awesome!!! 

Thanks Joseph! No apologies needed

Link to comment
Share on other sites

×
×
  • Create New...