ghodges Posted August 16, 2020 Report Share Posted August 16, 2020 (edited) First, the most obvious question....WHY? Well, I had an itch to try my hand at a full scratchbuild, having only done heavy conversions with only portions scratchbuilt til now. Second, I love the Golden Age of aviation of the '30s and many of those planes are still not available in 1/48, even in vac or resin. So, I settled on trying to build the Curtiss A-18 Shrike II, a little known twin-engine attack planes from the mid 30s, figuring it's very unlikely to ever be produced "for" me. Only a handful were produced due to Depression era funding and the fast paced changes to aviation at that time. As advanced as it was for the time it was designed (@1935), it was already being obsolesced by the planes that would replace it a mere 2-3 yrs after it was flown in the mid-late 30s...the A-20 and B-25 , which would be capable enough to carry themselves through WWII. References are practically non existent on the A-18. I contacted the National Archives, but was unable to get anything from them, even though my sources say they have the Curtiss archive material. There are none left in the world, so getting "walk-around" pics is a no-go. What's left is about two dozen decent b/w pics, mostly in flight and on flight lines, and woefully lacking of anything truly close up. Also, true scale drawings aren't available. There are some decent simple 3-views, which I enlarged for my use. I also tracked down some flying model plans from the 30s. Although very suspect in many areas, they at least gave me a second "reference". So, once I had those "sized" to 1/48, I jumped in with both feet. Ill use this first post to show some in progress pics..... The basic plans, glued to basswood and rough cut to shape. There's a sheet of copy paper white-glued between the halves of each part to allow them to be separated after final shaping. Much of the final shaping is done. Note the use of epoxy putty (Apoxysculpt) for the wing root filets. It was also used to make the engine nacelles for each wing. Basic parts after separating and priming. The tailplanes were actually cast in resin, another first for me. The cowl mold was made from the end of a large dowel rod. The basic vacuform parts, shot on a machine I borrowed from a friend. I bought an 4'x8' sheet of .03 styrene, cut it into about 18"x24" sections (to fit the machine I had) and vacked as many copies as I could. Note that not all of the parts on each sheet are usable (about 50% waste) Now it's like building any other vacuform model....only cruder! This project gave me a REAL appreciation for the vac Masters like you get with Koster.... Interior parts....I robbed the spare parts boxes whenever possible, but had to scratchbuild some things like the main panel and throttle quad. With no references, I simply built up the interiors to be "period authentic". I make no claims to "accuracy"! The fuselage finally assembled and scribed Main gear well floors with the depressions for the retracted tire (semi exposed as on the B-17). This also shows the main gear, detailed with various bits of rod and punched discs. Some of the fiddly bits....the props are from the spares box, as are the various antennas and the pitot. You can see how the vacked gear doors attach to the gear, which also now have their brake lines. The R-1820 engines are resin items, detailed with some wiring. Here's a rough check of the fit of the engines, cowls, props, and landing gear to see how (and IF) it'll all look when assembled. Now, on to the finished model pics! Gil Edited August 17, 2020 by ghodges 1 Link to comment Share on other sites More sharing options...
ghodges Posted August 16, 2020 Author Report Share Posted August 16, 2020 (edited) And here's how it looks when done.....seems the site is limiting how many I can post now... This model represents an A-18 Shrike II of the 13th Attack Squadron @1937.... Question, comments, and critiques welcome! Gil Edited August 17, 2020 by ghodges 2 Link to comment Share on other sites More sharing options...
Nick Filippone Posted August 16, 2020 Report Share Posted August 16, 2020 This looks great, Gil! And a natural metal finish no less. What was the actual Vacuform device you used? Thanks. Nick Link to comment Share on other sites More sharing options...
Ralph Nardone Posted August 17, 2020 Report Share Posted August 17, 2020 Nicely done! R Link to comment Share on other sites More sharing options...
ghodges Posted August 17, 2020 Author Report Share Posted August 17, 2020 Nick; I borrowed a buddy's "home made" vac machine that had a working surface of about 18"x24". I heated the plastic sheets in my oven and used my shop vac for the vacuum source for the platen. The "machine" itself is a simple wooden box, sealed, with holes in the top and a hole in the side for the vacuum hose/attachment. It used 2 sets of aluminum window frame material to make the frames to hold the plastic sheet between, which was then clamped in place with office style clamps (2 per side). Not overly sophisticated, but it worked quite well! Gil Link to comment Share on other sites More sharing options...
Nick Filippone Posted August 17, 2020 Report Share Posted August 17, 2020 That’s exactly how I built my vacuform machine, aluminum frames, office clamps and all. Only mine is nowhere near as big- about 4” by 12.” Hence I can only do one piece at a time- and that in 1/72 scale. I am very impressed with the quality of your moldings. Nick Link to comment Share on other sites More sharing options...
Mark Deliduka Posted August 17, 2020 Report Share Posted August 17, 2020 Oh my God! What an incredible journey you took me on! I am stunned and overwhelmed at all that you did to scratch build such an amazing, masterful model! Gil, you are now in a whole new category of Masters in my humble opinion. Link to comment Share on other sites More sharing options...
WildBill50 Posted August 21, 2020 Report Share Posted August 21, 2020 Great job Gil! How did you do the rivet detail...ponce wheel? That really sets off the panel lines. Great subject too. Bill Link to comment Share on other sites More sharing options...
ghodges Posted August 22, 2020 Author Report Share Posted August 22, 2020 Yes....I have a ponce wheel with several different sizes of "rivets", depending on the wheel selected. It's not too hard to control IF you go SLOW and use no more than medium pressure. You do have to watch it when you reach a curve though! I thought about adding more rivet lines....but that simply multiplied my chances of screwing them up, so I kept them to a minimum. Gil Link to comment Share on other sites More sharing options...
Wolfman63 Posted August 22, 2020 Report Share Posted August 22, 2020 Very nice! Came out great. Link to comment Share on other sites More sharing options...
Bradley25mm Posted August 27, 2020 Report Share Posted August 27, 2020 Wow! Amazing work Gil. She looks beautiful. Chris Link to comment Share on other sites More sharing options...
thevid Posted June 21, 2021 Report Share Posted June 21, 2021 Simply amazing work Gil. It is a beautiful aircraft and your craftsmanship is superb. It so reminds me of the Japanese Dinah. Thanks for posting the build process. Link to comment Share on other sites More sharing options...
Recommended Posts