phil Posted May 13, 2020 Report Share Posted May 13, 2020 Going to build the Italeri of above soon. They provide lots of screws and nuts for construction. My question, original construction of 1:1 would have been bolts and nuts rather than screws? Frame and running gear would have bolted up as opposed to large screws? Where visible I want it to look original. Fussing about little detail I guess. Thanks for the feed back. Phil S Link to comment Share on other sites More sharing options...
Eric Aitala Posted May 15, 2020 Report Share Posted May 15, 2020 Shameless plug - you might ask over in the Forums on F1M.com Eric Link to comment Share on other sites More sharing options...
Eric Aitala Posted May 15, 2020 Report Share Posted May 15, 2020 And don't forget >> https://web.ipmsusa3.org/content/alfa-romeo-2300-8c-monza-race-car E Link to comment Share on other sites More sharing options...
phil Posted May 25, 2020 Author Report Share Posted May 25, 2020 Thanks for this link to the kit review and build posting. Great info. I will refer to this many times I am sure. Phil Scala Link to comment Share on other sites More sharing options...
noelsmith Posted June 20, 2020 Report Share Posted June 20, 2020 Have a look at Scale Motorcars forum as they tend to specialise more in larger scale models. HTH. Link to comment Share on other sites More sharing options...
RickSchad Posted August 24, 2020 Report Share Posted August 24, 2020 I just built this very kit. It is a fiddly build but with a lot of care and scratch building it comes out pretty great! Link to comment Share on other sites More sharing options...
Recommended Posts