Jump to content

Wee Friends 1/72 Windsor Carrier


Ron Bell

Recommended Posts

This is one of the best resin castings I have ever seen. The detail is amazing, there were no bubbles or short shots, no globs and the detail went all the way down to the floor inside. One rear fender was broken, but a spare was included. It's OOTB with the exception of some of the stowage on the inside. The Windsor Carrier was made in Canada using parts from the ubiquitous Universal carrier in an attempt to produce a larger, more powerful vehicle. It was all that, but it was also found that it had some mechanical problems. Only about 500 were produced and the 21st Army Group used them to tow 6 pdr. AT guns in Europe.

 

00000IMG_00000_BURST20200126143155122_COVER.jpg

00000IMG_00000_BURST20200126143311013_COVER.jpg

00100lrPORTRAIT_00100_BURST20200126143229440_COVER.jpg

00000IMG_00000_BURST20200126143220053_COVER.jpg

00000IMG_00000_BURST20200126143155122_COVER.jpg

Link to comment
Share on other sites

That is impressive both the kit and your build.

Link to comment
Share on other sites

  • 4 months later...
×
×
  • Create New...