Narampa Posted November 15, 2019 Report Share Posted November 15, 2019 I have a Cutty Sark kit missing the plans. I believe that it is a very old kit as I cannot locate it in the downloads section of Revel. If you have a set and can help me or maybe you have downloaded them and would be able to forward me a copy I would be forever in your dept! THE KIT # IS 0399 Thank you Link to comment Share on other sites More sharing options...
SoftskinFan01 Posted November 15, 2019 Report Share Posted November 15, 2019 Hey, Lawrence. Not sure if this is what you're after or not: https://cuttysarkdrydock.wordpress.com/2011/09/23/the-cutty-sark-instruction-sheets/ I hope it helps! Gary Link to comment Share on other sites More sharing options...
Narampa Posted November 15, 2019 Author Report Share Posted November 15, 2019 (edited) 49 minutes ago, SoftskinFan01 said: Hey, Lawrence. Not sure if this is what you're after or not: https://cuttysarkdrydock.wordpress.com/2011/09/23/the-cutty-sark-instruction-sheets/ I hope it helps! Gary Thanks Gary this should be fine I have referenced the plans with the parts trees, and everything looks good. Thank you so much I really appreciate your help. I am moving you to the great people I have met on the net category. I see the plan is from 1974! On my Revel box it says copyright 1974. From the condition of the box it looks that old. I am lucky that all parts are in bags and sealed. So it should be a go! Once again thank you Lawrence Edited November 15, 2019 by Narampa Adding information Link to comment Share on other sites More sharing options...
SoftskinFan01 Posted November 16, 2019 Report Share Posted November 16, 2019 So glad I could help, Lawrence! I have gotten a TON of help and advice from fellow modelers. Glad I could contribute just a bit. Good luck with the model! Gary Link to comment Share on other sites More sharing options...
noelsmith Posted November 28, 2019 Report Share Posted November 28, 2019 Lawrence, as an addition to your Cutty Sark requests, besides the kit instructions you are looking for there is a fine set from George Campbell from the Cutty Sark itself Link to comment Share on other sites More sharing options...
rcboater Posted December 4, 2019 Report Share Posted December 4, 2019 Go look at the ships forum on the Fine Scale Modeler website. There is a terrific build thread on the Revell Cutty Sark there.... It seems to be the place to go for plastic sailing ships.... Link to comment Share on other sites More sharing options...
noelsmith Posted February 29, 2020 Report Share Posted February 29, 2020 A sadly missed friend of mine, the late Professor John Tilley shared many hints and tips on the FSM forum. Link to comment Share on other sites More sharing options...
Recommended Posts