Ron Bell Posted September 13, 2019 Report Share Posted September 13, 2019 I have an Eindekker with no markings and can find no, I repeat, no, aftermarket early WWI Maltese cross decals in 1/48. I found 1/144, 1/72 even 1/24 and 1/32, but no 1/48. Anyone know of any or have a spare set from a kit? If not, this one goes back on the shelf unfinished. Link to comment Share on other sites More sharing options...
66Foxtrot Posted September 14, 2019 Report Share Posted September 14, 2019 Maybe scale up some 1/72 ones, and print out on white decal paper?? Link to comment Share on other sites More sharing options...
Ron Bell Posted September 14, 2019 Author Report Share Posted September 14, 2019 Nice idea, if you have a printer that could do that, which I don't. But thanks anyway. Link to comment Share on other sites More sharing options...
Nick Filippone Posted September 14, 2019 Report Share Posted September 14, 2019 Ok, this is gonna sound crazy, but hear me out. And I concede I have never tried it. Since the markings you are trying to make are symmetrical in all axes, in theory, you could find some printed source for them and copy them on a copier where you can adjust the size. Then copy them on to the back or carrier paper side of white decal paper. Cut them out and you will have the white outline you need in white decal. Then, copy them again on the back of black decal paper and cut out the black only. Apply as a two part decal. Did that make any sense? Nick Link to comment Share on other sites More sharing options...
Nick Filippone Posted September 14, 2019 Report Share Posted September 14, 2019 Or, if no black decal paper, print again on white or clear and paint it black- with apologies to The Rolling Stones. Nick Link to comment Share on other sites More sharing options...
Recommended Posts