Bradley25mm Posted February 10, 2019 Report Share Posted February 10, 2019 I choose to do the base first on this build. I'm going to pose the Mustang in a state of Maintenance. The base itself consist of 3/4" plywood covered with cut squares of 80 grit sandpaper. I attached the squares to the plywood with contact adhesive. I painted the sandpaper with Testor's Model Master enamels. I did a pin wash of black artist oils to simulate oils stains. I finished it off by painting cracks with flat black, and applied pastel dust along the joints in the concrete. I found some grass that comes in like a blanket from Germany. It was applied over sanded grout that was painted dark brown. I did some scratch build. (The saw horses, work bench, and the propeller stand) The barrels,and tool box came from Miniart. The plaques were made at my local trophy shop. The figures were a mix of 1 kit supplied pilot, 2 Verlinden, and 2 Ultracast. I have not completed a lot on the plane itself. Its a great kit with loads of options, and the parts fit great. I purchased the plated metal model. Regards Christopher Link to comment Share on other sites More sharing options...
ghodges Posted February 10, 2019 Report Share Posted February 10, 2019 Holy cow! That's impressive and there's not even a model there yet! Looks like a well conceived "scene" and your figure painting is outstanding. The only item that jumped out at first glance is the side arm on the officer not in a flight suit. Looking forward to more on this one! GIL Link to comment Share on other sites More sharing options...
Bradley25mm Posted February 10, 2019 Author Report Share Posted February 10, 2019 Thanks Gil. The pilot with the .38 revolver is from Verlinden. The revolver came with the figure. I thought that it was a little strange myself, since the .45 was the issued side arm at the time. Regards Christopher Link to comment Share on other sites More sharing options...
Mark Deliduka Posted February 12, 2019 Report Share Posted February 12, 2019 That is magnificent! Such stunning work! Link to comment Share on other sites More sharing options...
Bradley25mm Posted February 13, 2019 Author Report Share Posted February 13, 2019 Thank you very much Mark! Link to comment Share on other sites More sharing options...
VonL Posted February 22, 2019 Report Share Posted February 22, 2019 Nice work - Looking forward to seeing the bird! Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 5, 2019 Author Report Share Posted April 5, 2019 Took a small break from modeling. Back at it again. Finally finished adding the photo etch to the engine, and cockpit. I purchased 4 sets from Eduard. Engine, cockpit, seatbelts, and gun bays. I also purchased a set of resin tires, and propeller with spinner. The kit rubber tires had nasty seams down the middle. After cutting the engine panels apart, I added photo etch to the inside of each one. I took the paper fuel tanks that came with the kit, and added them to the display. I used Testor's Metalizer Lacquer to simulate metal . This stuff is fantastic. I used it a lot for the engine components. Spray it on, let it dry, then buff it out. I seal mine after buffing. This prevents getting silver finger tips. One of the guys in our local model club was commissioned by the pilots son to build this exact same kit.The son gave him a copy of his fathers flight logs, and a very descriptive book detailing every one of his father's mission during the war. Thanks Ted for letting me use this info while building this kit. 1 Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 18, 2019 Author Report Share Posted April 18, 2019 Finally finished. This by far, was the best kit I've EVER built. My hat goes off to all the folks at Tamiya for putting together a fantastic kit. The fit of all the parts was simply amazing. If you like Mustangs like I do, you need to go out and pick up this kit. Regards Christopher. Link to comment Share on other sites More sharing options...
Mark Deliduka Posted April 18, 2019 Report Share Posted April 18, 2019 Wow! What a phenomenal job! I am overwhelmed here. I do hope you bring that to a Nationals; I believe you're a contender here! Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 20, 2019 Author Report Share Posted April 20, 2019 Thanks very much for the kind comments Mark! I really appreciate it. Would love to make it to the Nationals . Looks like a fantastic time. How often do you try and attend? Regards Christopher Link to comment Share on other sites More sharing options...
Mark Deliduka Posted April 20, 2019 Report Share Posted April 20, 2019 Every chance I get but with my income, I'm lucky to attend the western ones when they come out here. The furthest east I attended was Columbus, but my brother lived there so I saved a bundle on lodging, making it easier to go. Chattanooga will be the furthest east I attend without family to fall back on; that is if I make it. The cost and logistics will be very challenging for me but I'm working the problem now. Link to comment Share on other sites More sharing options...
johneaton Posted April 21, 2019 Report Share Posted April 21, 2019 Super build, very nicely done. I would comment on only one thing, and that is the propeller stand. The root of the propeller blade is the most highly stressed area and it is unusual to see a propeller resting on any part of the blade. The usual method is to use a spline that matches the one on the engine and mount it to the top of the stand to hold the propeller hub. Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 21, 2019 Author Report Share Posted April 21, 2019 Thanks a lot John for that correction. That’s something that can be easily fixed. I want things to be as accurate as possible. Regards Christopher Link to comment Share on other sites More sharing options...
ghodges Posted April 21, 2019 Report Share Posted April 21, 2019 What a super looking build and a very well posed scene too! Love the scheme you chose....later war when they started re-applying camo over the Mustangs delivered in NMF. Congrats, and thanks for letting us ride along! GIL Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 22, 2019 Author Report Share Posted April 22, 2019 Thank you very much Gil. Regards Christopher Link to comment Share on other sites More sharing options...
Bradley25mm Posted April 23, 2019 Author Report Share Posted April 23, 2019 Thanks again John. 1 Link to comment Share on other sites More sharing options...
Recommended Posts