Jump to content

Dragon UH-1N progress, part 2


Bradley25mm

Recommended Posts

             If there are any issues with the photos, (poor quality, or size)please let me know here. I used a free online picture resizing site for the first time. I've finally completed all the subassembly construction. I dug through my decal/dry transfer stash to make markings for the first aid kits, and 2.75" rocket pods. Once I've glued the fuselage halves together, I'll set it aside to dry. While I'm waiting, I'll weather the subassemblies with artist oils, and pastel chalks. Once the weathering is done, I'll seal everything with clear overcoat to protect the pastel from smearing.  On the rocket pods, I made some changes to the attachment points. I cut the molded attachment points off. They were quite comical. I cut off all the molded door handles, and made new ones from parts from my resin parts stash. They were handles originally for jerrycans. Hope to be finished by Monday of next week.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMG_4590_opt (1).jpg

IMG_4588_opt (1).jpg

IMG_4584_opt (1).jpg

IMG_4585_opt (1).jpg

IMG_4565_opt (1).jpg

IMG_4566_opt (1).jpg

IMG_4567_opt (1).jpg

IMG_4570_opt (1).jpg

IMG_4572_opt (1).jpg

IMG_4575_opt (1).jpg

IMG_4577_opt (1).jpg

IMG_4578_opt (1).jpg

IMG_4579_opt (1).jpg

IMG_4580_opt (1).jpg

IMG_4581_opt (1).jpg

IMG_4582_opt (1).jpg

IMG_4583_opt (1).jpg

IMG_4593_opt (1).jpg

IMG_4594_opt (1).jpg

Edited by Bradley25mm
Link to comment
Share on other sites

×
×
  • Create New...