Jump to content

1/48 Accurate Miniatures SB2U-2 Vindicator


Recommended Posts

Starting the 1/48 Accurate Miniatures SB2U-2 Vindicator and will be using the Eduard photo etch detail set. The scheme will be the Centaur Vampires of VS-72 assigned to the USS Wasp (CV-7) that operated in the Atlantic Ocean during WWII. The detailing of the cockpit in this kit is great and the photo etch details add a little more depth. The pilots section is done. Working on the rear cockpit now.

More build photos at https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

 

dscn0704.jpg

 

dscn0707.jpg

 

dscn0708.jpg

Link to post
Share on other sites

The cockpit on the 1/48 SB2U-2 Vindicator is now complete and the fuselage is together. The cockpit was a little tight getting everything to fit but it is together. Now working on detailing the engine. Using 30 AWG wire, I am making the pushrods for the cylinders.

Build log at: https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

 

dscn0733.jpg

 

dscn0740.jpg

 

dscn0743.jpg

Link to post
Share on other sites

Weekly update on the Accurate Miniatures 1/48 SB2U-2 Vindicator. The engine has been detailed and painted. Next it was installed and the cowling was completed. The cowl consisted of 4 separate pieces and the fit was very good. Just juggling 4 pieces was a little difficult to get the alignment correct.  The landing gear was detailed, painted, and mounted. Now working on the bombs and mounts.

All build photos at https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

 

dscn0746.jpg

dscn0750.jpg

dscn0758.jpg

dscn0754.jpg

Link to post
Share on other sites

Work continues on the Accurate Miniatures 1/48 SB2U-2 Vindicator, the gun and bombs have been detailed. I painted the base coat on the aircraft. This is kind of a new area as I am trying out Vallejo paints for the first time. I usually use Model Master and Tamiya paints for many years. With Model Master now owned by Krylon, they are cutting back of many of the military colors. The Vallejo paints work very well and gives you a nice even coat.  

Build log with all photos at https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

 

dscn0762.jpg

dscn0774.jpg

dscn0775.jpg

 

  • Like 1
Link to post
Share on other sites

Update on the 1/48 Accurate Miniature SB2U-2 Vindicator. It’s been a busy week with not a lot of build time. I was able to get all the initial painting done. Instead of using the decals I decided to paint the tail stripes. I mounted the gun and bombs. I am masking the canopy with Kapton tape now then on to decals.

All the build photos are at https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

dscn0779.jpg

dscn0783.jpg

dscn0784.jpg

 

Link to post
Share on other sites

Excellent paint job, and those tail stripes rock!

Please expand on "Kapton" tape....is that a brand or a type? What makes it your preference? It looks like a possible new "tool" that we might all need!  Thanks!

 

GIL :smiley16:

Link to post
Share on other sites

Kapton tape is the type. It is typically used for electronics work. The tape is translucent, made of polyimide which resists thinners, paints and glues. The silicone adhesive used on it is designed to be residue free. The adhesive also does not pull paint off like some masking tapes. I prefer using this tape as it has some small stretch to it so you can wrap around curves like canopies. It trims easily and leaves a very good edge. I use an orange wood stick typically used by finger nail stylists to get a good stick on the edges which prevents bleed-thru of the paint. It comes in varying widths as well. I used it to mask the stripes on the tail.

You can get a pack with different widths on Amazon: https://www.amazon.com/ELEGOO-Polyimide-Temperature-Resistant-Multi-Sized/dp/B072Z92QZ2/ref=sr_1_3?ie=UTF8&qid=1537607346&sr=8-3&keywords=Kapton+tape

The orange wood sticks also work well for apply in putty as well. one end is pointed and the other is flat. You can get them on amazon as well https://www.amazon.com/gp/product/B077GR3Y8H/ref=ox_sc_act_title_1?smid=AI5NMG8XBYKC1&psc=1

Edited by Wolfman63
Link to post
Share on other sites

Completed the 1/48 scale Accurate Miniatures SB2U-2 Vindicator. This kit was a very nice kit to build. Fit was very good. Aside from the photo etch set, The only other thing I did was make some decals. One is the VS-72 logo on the side of the fuselage and the prop decals.

Build photos at https://davidsscalemodels.com/build-log/1-48-sb2u-2-vindicator/

Final photos at https://davidsscalemodels.com/gallery/1-48-accurate-miniatures-sb2u-2-vindicator/

 

dscn0791.jpg

 

dscn0792.jpg

 

dscn0804.jpg

 

Link to post
Share on other sites
×
×
  • Create New...