ju52junk Posted April 4, 2018 Report Share Posted April 4, 2018 Years ago I built a F6F Hellcat. At that time I used Testor's Master Model Enamel paints and used Testor's Semi gloss Lacquer spray for the clear coat. Over time where the white paint is the paint has yellowed. Is the yellowing on the enamel white paint or the Lacquer clear coat? Is the enamel paint out gassing and causing the lacquer to yellow over time? What can I do(if anything) to remove the yellowing? Thanks. Link to comment Share on other sites More sharing options...
Rusty White Posted April 4, 2018 Report Share Posted April 4, 2018 I had the same thing occur on a 1/72 scale B-70 vac form. I put so much time into that model, it made me tear up when I noticed the yellowing. I tend to think it is the Testor clear coat I used. Maybe I applied too many coats. Link to comment Share on other sites More sharing options...
Nick Filippone Posted April 4, 2018 Report Share Posted April 4, 2018 Try parking it in sunlight. It will bleach out the yellow over several weeks. Just don't let it get too hot! This technique also works for decals that have yellowed. Link to comment Share on other sites More sharing options...
ju52junk Posted April 4, 2018 Author Report Share Posted April 4, 2018 5 minutes ago, Nick Filippone said: Try parking it in sunlight. It will bleach out the yellow over several weeks. Just don't let it get too hot! This technique also works for decals that have yellowed. I will try exposing the model to sunlight. Thanks for the info. Link to comment Share on other sites More sharing options...
ghodges Posted April 4, 2018 Report Share Posted April 4, 2018 Good luck with getting the yellow out. I've heard it works for decals, but not aware of anyone trying it for a model. Model Master/Testors lacquer gloss coat is famous for yellowing over time, and the more you apply when you build the model, the more it will yellow noticeably. Heck, if you buy an older bottle it'll already have a golden tint to it! The problem is UV rays, which cause white and yellow enamel/lacquers to yellow. I've switched to using Alclad Klear Kote lacquer gloss, which has a UV inhibitor in it. If you cannot find some of that near you, check your local Home Depot/Lowes/Ace hardware store for a gloss lacquer "varnish" that has a UV inhibitor. Hope this helps! GIL Link to comment Share on other sites More sharing options...
ju52junk Posted April 4, 2018 Author Report Share Posted April 4, 2018 2 hours ago, ghodges said: Good luck with getting the yellow out. I've heard it works for decals, but not aware of anyone trying it for a model. Model Master/Testors lacquer gloss coat is famous for yellowing over time, and the more you apply when you build the model, the more it will yellow noticeably. Heck, if you buy an older bottle it'll already have a golden tint to it! The problem is UV rays, which cause white and yellow enamel/lacquers to yellow. I've switched to using Alclad Klear Kote lacquer gloss, which has a UV inhibitor in it. If you cannot find some of that near you, check your local Home Depot/Lowes/Ace hardware store for a gloss lacquer "varnish" that has a UV inhibitor. Hope this helps! GIL Thanks for the tip Gil. I bought some "Lucky" varnish from Mig the other day. Hopefully this varnish will not yellow over time. Link to comment Share on other sites More sharing options...
Recommended Posts