Jump to content

AMT American LaFrance Ladder Truck


Joev259A

Recommended Posts

I'm building the ancient AMT 1/25th scale American LaFrance Ladder Truck. Does anybody know when it was first released? Thanks!

Link to comment
Share on other sites

Hi, Joe,

 

Best guess is the early 1970s. I have an original issue, and AMT was not yet putting copyright dates on or in their kit boxes. This kit was part of a series of six fire trucks and emergency vehicles, as follows:

 

T-511 American La France 1000 Series Ladder truck -- cost $10.00

T-513 American La France 1000 Series Pumper -- cost $7.00

T-514 American La France 1000 Series Aero Chief -- cost $10.00

T-516 Chevrolet Rescue Van -- cost $3.00 (1972 Chevrolet)

T-223 Chevrolet Fire Chief -- cost $2.25 (1970 Chevrolet)

T-227 Ford Interceptor Police Car -- cost $2.25 (1970 Ford)

 

All of these kits have been reissued over the years, with current ones retailing for up to 10 times their original cost.

 

Ed

Link to comment
Share on other sites

Thanks for the information. I thought they were a series 900, rather than a 1000. Actually I'm using the Ladder truck as a basis for a scratch built articulated ladder truck. The plastic is a good, solid for conversion work. Thanks again!

 

Joe V. :smiley20:

Link to comment
Share on other sites

That is great Joe! I want to see pics. Please post them as you go here so we can all enjoy this build.

 

Ed, good information. I never knew there were so many of them out there. I built a fire engine ages ago when I was a kid. If I would have known there were so many more to choose from, I;d have made an effort to get all of them and build them. I might even try now provided I can finish up enough of my current stash.

Link to comment
Share on other sites

  • 1 month later...

Joe,

I would recommend looking for copies of the American Fire Apparatus Vol 1 - Pumpers and Vol 2 - Aerial Equipment from Squadron/Signal publications to help with your project. ($19.95 each)

As for the kits, they were originally designed as the Series 900 equipment as the difference between the 900 and 1000 series was minor except for the serious modeler or fire truck enthusiast i.e. painted pump panel (900) vs chrome panel (1000).

Is there a major need to designate as either Series 900 or 1000? First two attached photos are of Series 900 engines from Greensboro & Raleigh, NC FD. Third photo is of a Series 1000 - as you see little difference unless you know where to look.

Good luck on your build, I too will be wanting to see photos of your build.

Regards,

Steve

 

 

 

post-3014-0-64540300-1488503133_thumb.jpg

post-3014-0-47689900-1488503165_thumb.jpg

post-3014-0-08468300-1488503209_thumb.jpg

Link to comment
Share on other sites

Hi, guys,

 

I claim no expertise on the model numbers for the fire trucks in the kits. I merely listed what was printed on the kit boxes by AMT.

 

Ed

Link to comment
Share on other sites

Ed,

You are not the first to confuse the ALF 900 & 1000 series apparatus. The Greensboro engine picture I sent yesterday was the "first-due" apparatus for my neighborhood. When I took the kit to the fire station, they showed me the difference between the two series. If you think about it from a kit marketing view, what sounds "flashier" Series 900 or Series 1000(Century) apparatus? Either way, you come out with a good basic unit. (also one easy to modify to make a specific unit)

Joe - I am planning to kit-bash the AMT engine & ladder truck to make an ALF 100' mid-mount aerial (see attached), I would be very interested to see how you configure you articulated aerial - will you be using an ALF tractor or some other make?

Best wishes,

Steve Payne

IPMS 47035

post-3014-0-96476200-1488595317_thumb.png

post-3014-0-60272300-1488595318_thumb.png

post-3014-0-11019400-1488595319_thumb.png

post-3014-0-85135000-1488595319_thumb.jpg

post-3014-0-37909300-1488595320_thumb.jpg

Edited by Herk
Link to comment
Share on other sites

First- I'd like to thank you all for the responses to this. I had all the photos and drawings from a 1970's aerial truck that was in the fire company my dad belonged to, and finally I was going to start building it. (Steve- when I get to the stage of building the ladder, my intent was to kit bash a couple of AMT ladders.)

 

Unfortunately when I started to build the tractor, things did not line up, I measured one length, it came out to be another, angles didn't work, my cat ate the decals, my dog ate the cat, and anything other reason that the build became a fiasco. Sorry to say, it's been "deep-sixed."

 

I'm more of an airplane guy, :blu-plane: so I'm thinking about scratch building in the future a P-2 crash truck. Basically a box on big wheels . . . .

Link to comment
Share on other sites

Joey,

Sorry to hear about the issues with the articulated ALF. I know you wanted to do a model of your fathers' truck, but have you considered using a different tractor (one that AMT now makes?) The Series 700 truck photo I sent you was upgraded in 1980 with a Mack CF tractor, so this type change is not unusual.

Your issues with lengths & angles sound just like the problems I had in scratch building an AF Class 530B (Series 1) crash rescue truck. As former AF "Ramp Rat" & fire fighter, I thought the conversion of an Army 2 1/2 toner to the Class 530 would be easy - keep the cab & frame from the kit and build be new body - it was all straight lines and 90 degree angles - yea right! After a cardboard template and a two styrene sheet plastic attempts, I came out with what you see attached. It has gotten a couple of awards at shows, but it has to compete in categories where fire trucks are not seen i.e. soft-top trucks & jeeps.

I was lucky in finding a web site that had a design and templates for a card stock model of the 530B. I copied those and use a combination of the computer & a copy machine to resized the card template to 1/35. What scale are you looking at building the P-2 as - 1/72, 1/48, etc? Have you considered doing an O-11A or B? (see attached)

Best of luck on the build - will be glad to share any photos or data I have on the O-11s.

Regards,

Steve

 

PS - this is the list of what it took to make the Class 530B

 

Chassis & Cab from Revell/Monogram M34 Tactical Truck kit. Body is scratch built, to include pump panels, using the following:

· sheet styrene – truck sides, compartment doors

· tube styrene – hard suction hose

· brass wire – ladder supports, tail board grab handles, door handles

· balsa wood – hose bed drain platform

· shoe lace – 5 and 2 ½ inch hose

· spare parts box – siren, rotating beacon, shovel, fire extinguishers, ladder

· custom decals for all doors

· Archer Transfers for cab dials & placards, pump panel dials & placards, non-skid surface for steps, cab floor & tailboard

· 3 Inches Under (eBay) – hose nozzles, Motorola radio, cab spotlights

· decorative bezels – head lights, emergency lights, turn signals, backup lights

 

post-3014-0-61815200-1488680085_thumb.jpg

post-3014-0-87991000-1488680151_thumb.jpg

post-3014-0-68013400-1488680153_thumb.jpg

post-3014-0-54974600-1488680154_thumb.jpg

post-3014-0-33623100-1488680155_thumb.jpg

post-3014-0-80118500-1488680197_thumb.jpg

post-3014-0-57078300-1488680198_thumb.jpg

post-3014-0-63805500-1488680905_thumb.png

post-3014-0-72436500-1488680906_thumb.png

Link to comment
Share on other sites

×
×
  • Create New...