Jump to content

1968 STP Lotus turbine


 Share

Recommended Posts

All-

 

I built this from an old white metal 1/43 kit from SMTS (Scale Model Technical Services).

 

Lots of unwanted drama, multiple repaints, but finally got it done for the table at Modelpalooza '16 in Orlando the weekend of Sept 16 - 18. I painted it with Gravity Colors "STP Orange". Yes, the correct color is bright day-glo orange, NOT red. I used new decals, the old ones were badly yellowed and very thick, from Indycals. The yellow on the left front wheel/tire is correct for race day. I also ground off the cast in seat belts and replaced them with photoetched 1/48 WW II US aircraft seat belts since they were period correct.

 

Cheers,

Rick

 

post-2724-0-54899300-1474500876_thumb.jpg

post-2724-0-78949700-1474500877_thumb.jpg

post-2724-0-76485700-1474500878_thumb.jpg

post-2724-0-75822900-1474500879_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Nice job.

I also have some of the Gravity line. I was told they were prethinned, only to find out more thinner is needed to be able to shoot them through an airbrush. Once I properly thinnef them, they work nicely. Just don't shoot the clear coat over enamel. It's way too hot!!!

Link to comment
Share on other sites

 Share

×
×
  • Create New...