aAzZ09 Posted June 30, 2014 Report Share Posted June 30, 2014 (edited) I'm priming my F-86 Sabre with the Alclad II grey primer per instructions and noticed it was rather thick applied by airbrush to the surface. The instructions did not mention thinning the primer- only applying it at 12 to 15 PSI. I've certainly have had to sand down the primer to remove all blemishes.This is my first time I've used Alclad II and have used many other metalizers for the last 40 years with good results. Has anyone had any experience with this product lately? Many thanks, Mark Edited June 30, 2014 by aAzZ09 Link to comment Share on other sites More sharing options...
dmorrissette Posted June 30, 2014 Report Share Posted June 30, 2014 Here's a good article on Alclad (and foil) http://famecities.com/wp-content/uploads/2013/07/IPMS-FameCities-Alclad-II-Article.doc Dave Link to comment Share on other sites More sharing options...
aAzZ09 Posted June 30, 2014 Author Report Share Posted June 30, 2014 Many thanks Dave. Best, Mark Link to comment Share on other sites More sharing options...
Recommended Posts