Jump to content

1/350 Yukikaze


Guest PetrolGator

Recommended Posts

Guest PetrolGator
USS Maine suffered some pretty ugly damage in my move so I've postponed completion until I find some parts that I need to complete her.


I've decided to move up to 1/350 again now that I FINALLY have the room to build something in this scale. Yukikaze is a precursor to a 1/350 Yamato I plan to go absolutely nuts on.


Yuki is a good kit, and the 1940 version gives the clear early war version that I love so much. I plan to waterline her, showing her at Guadalcanal when she possibly put a torpedo into the fantail of the Laffey. I'm using Veterans Models for various deck equipment, rangefinders, and other its. Her AA guns and ammunition boxes are from Alliance, along with other PE sets. I'm also using the dedicated Eduard set for this kit.


Current progress is as follows:

BFF34A46-DA59-413D-AD66-A3AAE3D4F7A4_zps

I've replaced the brass strips... with brass. Some PE work is done, though the whole thing is going intentionally slow. I'm enjoying the process on this one for once.


69F1FE70-9AC9-4BBB-87DF-C933FD100487_zps

All the stuff I'm going to use.


718EF7D8-9CF2-48A0-8D67-AF234990D2DC_zps


493917B1-DB8C-47B4-8CF0-74672C9C325F_zps


32736CBC-5C31-4C74-A471-7F7F90834D36_zps


All for now, and for a bit. Work will be slow on this. My recent move to New Orleans has once again granted me a social life.

  • Like 1
Link to comment
Share on other sites

Guest PetrolGator

PE = fun. Gaps = Not.

 

Progress:

- Finished PE of bridge

- Detailed interior. Yes. I actually did this.

- Added some plastic stripping based on the Kagero 3D book. It's a wee bit overscale, but whatever. It'll look cool.

- Finished aft funnel PE and surrounding area. I need to add some generic railing, but that's it. I also glued it down. It's now pending seam filling.

- Yuki looked goofy without SOME teeth, so I threw on one of her turrets with brass barrels.

- Added parts from Veterans (searchlight, bridge details)

 

Next step: Paint interior of bridge and attach the top permanently. I'll then fill gaps and mask around the bridge.

 

4984C3E1-EAEB-47DF-90BE-7428736C4E73_zps

 

98CAA635-B132-40B0-9FAF-CF53C7B6BFA0_zps

30417592-E31F-437B-AE54-3A5DE6CB86BF_zps734C1D1C-FCB9-471D-860A-F214E6BC9F28_zps

Link to comment
Share on other sites

Guest PetrolGator

UPDATE!

 

Yukikaze has gotten her rather pathetic little anti-air setup. Seriously. This is it.

 

E5D3338E-BB08-4F35-8B0B-5E9C813448B8_zps

Heh... appears like I forgot the sights for one of the guns. Whoops. I also need to fix a seat. Whoops x2

 

B24DF2DE-9A57-457E-8381-C7D3DCD86113_zps

I've started work on the forward funnel. I have some scratching to do to match my resources to REALLY detail it. I hope to have that done tonight.

 

86726774-40D6-416F-8F65-651AE1DC4A91_zps

Bridge and stuff. I still need to add some stuff.

 

D6A27214-0508-44B1-9C25-404A07001EDF_zps

Link to comment
Share on other sites

Guest PetrolGator
Update. I've been slowly chipping away at the PE. I've replaced the searchlight and several range finders with Veterans equivalent and used AMW's AA guns. I've also used some of my brass stock to help dress her up along with AMW PE sets. I LIKE most of Alliance's stuff, but the hand rails could have used shorter supports. It's WAY overscale. I'm having to nip them a bit to keep it all looking neat. The Eduard set is a joy to worth it. PE bends easily and seems relatively strong.


I'm hoping to have the forward funnel done tomorrow (minus handrails which will be applied later) and cemented on. In an ideal world, the turrets will all have their barrels.


5BC13D79-9C58-4841-BFBA-6A07160ACCA5_zps


08818255-5EB6-4362-9101-8A253DAE2842_zps


8F84AC05-168A-40D4-8950-C58BE0BAE6B9_zps


Note: Portions of the mast are so thick as to actively bother me. I'll be replacing a lot of the outriggers with brass. I may keep the plastic tripod, however. Recall that this WILL be waterlined. I'm keeping the bottom hull for (1) strength and (2) the bow, which will be partially out of the water.


Mockery welcome.

Link to comment
Share on other sites

Guest PetrolGator
So, yeah... more PE. I'm building this SLOWLY, which may just become my "normal speed" with the newfangled social life and whatnot.


617C3C88-762E-45A2-9A38-EF21E4B9EA9D_zps

Turret. I have one more of these to do. I also need to rejoin the upper handrails. Jeez. These boats are like jungle jims..


532F5F78-FC52-4CCA-972E-262D10BF86EB_zps

Turrets in place.


FA814E87-2ECA-431F-8EC6-9445E80F79B3_zps

Overall hull shot.


The Eduard PE is nice, for the most part. I'm leaning toward rebuilding the masts with brass. It's a REAL weak spot for me and these..... interesting masts will prove a real challenge. Note the torpedo crane at her aft. I'm using the plastic simply to gauge how the mainmast fits.

Link to comment
Share on other sites

  • 2 weeks later...
Guest PetrolGator
Most of the base paint work is done. Here's my most recent dry fit. Bridge and stacks are attached but the turrets and foremast are not.


9E8B426C-EF6F-4CEC-B060-837C72232DD8_zps

Yeah. That mast is too thick.


4A8D2493-AD76-4B08-B368-F5122B4F2EC3_zps


24CDD257-652D-458F-AF1F-22566CDD45F5_zps


Can anyone spot Yukikaze's victim in the background?


She will be waterlined, firing her fish.


Next step: add some remaining bits here and there and then begin my favorite part of a build: weathering!

Link to comment
Share on other sites

Guest PetrolGator

Ha. No. It's hard to see, but the Laffey's back there. I'm building the Yukikaze in her 1942 configuration, when she participated in the First Naval Battle of Guadalcanal.

Link to comment
Share on other sites

Chris,

 

What was the pupose of the brass with the linoleum decking? is it just where the sheeting would meet?

 

It seems like everything is coming along well for the build so far. Cool ship. One of my guys has a 1/200 scale "Yuki" he built some time ago.

 

Keep up the good work.

 

Bill

Link to comment
Share on other sites

Guest PetrolGator
Bill: The stripping held down the linoleum decking. What I have is a LITTLE overscale, but it looks good.


I've Futured, done some weathering, added railing, crew, and some little details. I also broke down and added some piping to the underside of the bridge wings. I'm glad I did. The forward railing, with the odd surface, was a PAIN. I also added some platforms along the edge of the bow (forgot was these were called?) from Rainbow's excellent deck set. My propeller guards also come from this same set.


To do:

- Finish taking care of any paint blemishes and add the decals I forgot. Blend.

- Hit it with dullcoat

- Rig

- Water base.


Currently, it's a wee bit... glossy. Here are the pictures:


4281AB15-8B31-4E2C-955C-11B0541BDAAB_zps

Notice the piping. The funnel caps were noticeably lightened through weathering. I'll darken them with some pastels.


4281AB15-8B31-4E2C-955C-11B0541BDAAB_zps


897B4E38-97AC-4539-B34D-6BBF015000AE_zps


523E359E-353B-4C03-A38C-14B7EE0E7DF6_zps


Hopefully, I'll have some dullcoated and rigged photos in the next few days.


Comments always welcome. I appreciate criticism.

Link to comment
Share on other sites

Guest PetrolGator
Why is it that the last few stages of a build seem to take forever? Between filling gaps and adding details, well, it's a pain.


I've decided to build some wee detail while waiting for paint to dry on the forward launches.

C4983FD4-E2D8-4CB8-9A63-5745D41354BC_zps


This wood was made using strip styrene, painted Tamiya deck tan, then dirtied with oils. The pile was (haphazardly) stacked, then glued with some wire to hold it all together. I think I'll make another stack or two while I wait for the other two launches to dry.


I installed the launches on deck, as per the Kagero book. You may note the davits are different, compared to previous pictures I post. This is because I am a stupid person and I do not even bother to glance at directions when adding new parts to a model. I assume, place them in the wrong place, then proceed to break a dozen things fixing it.

EC1032E4-D90E-445A-B741-F0C782B6AFD4_zps


Midships and my fat thumb. Figures are L'Arsenal and guns are care of Alliance Modelworks... nice stuff. Hose is made from wire, painted tan, then darkened with oil. (This sort of painting is a theme for my builds. I dig oils.)

19C2B02F-E760-4728-8756-6008DC1CE64A_zps


Overall stern view.

5E328839-A515-480B-95EB-4916D34B4A27_zps


Remaining work will center around rigging and two boats. Once that's all done, she'll get her dullcoat and I'll place Yukikaze in her waterbase.


I'm debating on my next build. I'm either going to go easy and do a Tamiya Fletcher, attempt some scratch work and do a Trumpy Sullivans as the USS Johnston, or jump right into my Monochrome Akizuki that I've spent ages looking for. Still debating.

Link to comment
Share on other sites

Guest PetrolGator
Forgive the poor imagine quality.


Yukikaze is largely complete. I have to add two more launches to her midships, add some sprue for those davits, dullcoat, and maybe add a flag or two to the halyards.


....then it's off to the races with the water base.


I'm really happy with the details on this, so-so with the rigging, and pretty happy with the paint. I definitely see major issues that need addressing on my next build.


1C959CF1-4987-45EF-B11C-6987AAF10CBB_zps


E734514B-10D6-4630-BB6F-4586F086E5FA_zps

Really blurry. Sorry.


88798EC4-AA4E-430B-85B3-1053DC009314_zps


There are few good places to take photos of models in my new house. I'm going to have to get creative and build a new booth, methinks.

  • Like 1
Link to comment
Share on other sites

Cool idea to catch your own reflection taking the photo in the glass door window. The ship is looking great!

 

When I take club meeting model photos for the Newsletter, I bring two light blue foam core panels that I picked up at Hobby Lobby in the frame materials/art department. These two panels can be your base and background. If one gets too beat up, buy another one to replace it. My two panels have survived almost ten years of use. I store them face-to-face to protect the color panels in a basement room at home between meetings. I usually work with room lighting (fluorescent) and no flash. You get a monotone background that eliminates all background clutter of tools, paints, other model boxes, which makes looking at your model the only task for a viewer.

 

Ed

Link to comment
Share on other sites

Great job. The PE really adds detail to the model. Question, what are the two turrets in the middle of the ship for? You added brass barrels for the front and two rear turrets. From that, I conclude that the two middle ones are not for guns. What are they for?

Link to comment
Share on other sites

Guest PetrolGator
Clare,


The turrets in question are for her Long Lance torpedoes. The Japanese believed (correctly) that the crews would perform better out of the elements.


Here's some better photos of the Yukikaze. I'm going to dress up the base tonight.


9F771156-C0B0-4998-B187-1D8615E505AC_zps


80970D92-AF88-4CC3-BF0F-754A27151F43_zps


0781475B-78C3-4195-AFBC-FCE0289884B5_zps


DA576DBD-56D5-4611-ACE7-D139C3BDAE34_zps

Link to comment
Share on other sites

Guest PetrolGator

Thank you, gentlemen. My wife has helped me finish the border of the base. I'm hoping to get final pictures of this tonight.

Link to comment
Share on other sites

×
×
  • Create New...