Search the Community
Showing results for tags '1/72'.
Found 13 results
-
Seeking decals for the Williams Bros. 1:72 C-46 commando. I have the decals with the original (mid-1970s) release, and it has the blue of the US insignia too light. Plus, it's for a natural medal one and I want to do one in Olive Drab over Neutral Gray. I know Caracal Models has a sheet coming out sometime later, but I would like to get something sooner. I am planning to build the C-46 for a chapter display project. Any help in this matter would be most appreciated. Thank you in advance.44 Bob
-
Selling the last released detailing sets of Metallic Details: Detailing sets for aircraft model An-225 Mrija (Revell, 1/144) - $58.25 Sets contain resin and photoetched parts for detailing of landing gears, engines and exterior. Engines for aircraft model An-124 Ruslan (Revell, 1/144) - $10.10 Set contains resin and photoetched parts for detailing of engines. Cockpit set for aircraft model Su-34 (Kitty Hawk, Hobby Boss, 1/48; 1/72) - $24.65 Sets contain resin and photoetched parts for detailing of cockpit. Detailing sets for aircraft model Su-35 (Kitty Hawk, 1/48) - $30.25 Sets contain resin and photoetched parts for detailing of exterior, air intakes and interior. Jet nozzles (opened) for aircraft model MiG-29 (Great Wall Hobby, 1/48; Zvezda, Trumpeter, 1/72) - $23.55 Sets contain resin and photoetched parts for detailing of jet nozzles. Ejection seat K-36D-3.5 (1/48; 1/72) - $7.85 Sets contain resin and photoetched parts to build 2 seats (in each set). Ejection seat K-36L-3.5 (1/48; 1/72) - $7.30 Sets contain resin and photoetched parts to build 2 seats (in each set). British colonial cone tent Mark 5 (1/72) - $23.55 1 pcs. No Assembly required. -
Selling the last released detailing sets of Metallic Details: Jet nozzles for aircraft model B-1B Lancer (Revell) in scale 1/48 - $44.50 Set contains 26 resin parts (16 main parts of the nozzle and 10 sprues with rods) for detailing of jet nozzles. Air intakes for aircraft models MiG-25 (ICM) in scale 1/48 - $18.25 Set contains 4 resin parts and photoetched board (53*145 mm) for detailing of air intakes for aircraft models MiG-25 (ICM). Seat belts for aircraft models MiG-25 (ICM) in scale 1/48 - $6.85 Set contains photoetched board (25*32 mm) for detailing of seat belts for aircraft models MiG-25 (ICM). Detailing set for aircraft model MD-87 (AMP) in scale 1/144 - $8.00 Set contains 1 photoetched board (35*47 mm) for exterior detailing. Detailing set for aircraft model Tu-134 (Zvezda) in scale 1/144 - $8.00 Set contains 1 photoetched board (35*47 mm) for exterior detailing. Detailing set for aircraft model IL-62 (Zvezda) in scale 1/144 - $12.55 Set contains 1 photoetched board (70*70 mm) for exterior detailing. Antennas and sensors of Soviet civil aviation in scale 1/144 - $4.56 25 pcs. Tiny Tim rocket in scales 1/48 - $8.55 Set contains 4 resin parts and 16 photoetched parts for building 2 rockets Tiny Tim. Tiny Tim rocket in scales 1/72 - $5.70 Set contains 4 resin parts and 16 photoetched parts for building 2 rockets Tiny Tim. U.S. WWII universal trailer Mk. 2 in scales 1/48 - $16.00 Set contains 24 (2*12) resin parts for building 2 trailers. U.S. WWII universal trailer Mk. 2 in scales 1/72 - $9.15 Set contains 24 (2*12) resin parts for building 2 trailers. Tiny Tim with trailer in scales 1/48 - $12.30 Set contains 16 resin parts and 8 photoetched parts for building 1 rocket Tiny Tim and 1 trailer. Tiny Tim with trailer in scales 1/72 - $7.45 Set contains 16 resin parts and 8 photoetched parts for building 1 rocket Tiny Tim and 1 trailer. U.S. WWII Small wall tent in scale 1/72 - $10.30 1 pcs. No Assembly required. U.S. WWII Pup tent 2 x in scale 1/72 - $4.60 1 pcs. No Assembly required.
-
Selling the last released detailing sets of Metallic Details: SR-71 Blackbird. Landing gears (Testors/Italeri) in scale 1/48 - $50.00 Set contains resin and photoetched parts for detailing of central and front landing gears: wheel wells, struts, wheels, landing gear doors. Detailing set for Zvezda kit "Boeing 737" in scale 1/144 - $13.55 Set contains parts for detailing the exterior of the aircraft. Detailing set for Zvezda kit "Boeing 767" in scale 1/144 - $13.55 Set contains parts for detailing the exterior of the aircraft. Detailing set for aircraft model Boeing 747 (Revell) in scale 1/144 - $27.00 Set contains parts for detailing the exterior of the aircraft. Ejection seat K-36DM in scale 1/72 - $4.00 The set contains resin (5 pcs) and photoetched (8 pcs) parts to build 1 seat. MiG-23. Jet nozzle (Trumpeter) in scale 1/48 - $17.00 Set contains 9 resin parts. Two versions in one set. MiG-25 RB/RBT. Jet nozzles (ICM) in scale 1/48 - $22.00 Set contains 14 resin parts.
-
Selling the last released detailing sets of Metallic Details: MiG-29. Jet nozzles (Great Wall Hobby) in scale 1/48 - $32.00 Set contains resin (8 pcs) and photoetched parts. Detailing set for aircraft model Douglas MD-11 (MikroMir) in scale 1/144 - $39.60 Set contains photoetched plate and film with a color dashboard. Detailing set for aircraft model Vickers VC10 (Roden) in scale 1/144 - $19.00 Set contains parts for detailing the exterior of the aircraft. Detailing set for helicopter model AH-64 Apache LongBow (1/48) - $65.00 AH-64 Apache. Tail support (1/48) - $15.30 AH-64 Apache. Exhaust Pipes (1/48) - $16.50 AH-64 Apache. LongBow Radar (1/48) - $10.50 AGM-114 Hellfire (1/48) - $35.00 Sets contain resin and photoetched parts. Harrier GR7/GR9. Swiveling nozzles and outrigger wheels (1/48) - $20.50 Harrier GR7/GR9. Swiveling nozzles and outrigger wheels (1/72) - $15.50 Sets contain 10 resin and 4 photoetched parts. F-18F. Advanced Crew Station rear cockpit in scale 1/48 - $7.35 Set contains resin parts (2 pcs). Su-27. Jet nozzles (1/48, Academy) - $32.00 Su-27. Jet nozzles (1/72, Zvezda, Hasegawa, Hobbyboss) - $16.50 Sets contain resin parts (10 pcs).
-
For those who have wondered where I vanished to...particularly my client who has already been informed...and to steal a quote from a Looney Tunes cartoon, I've been sick lately. And frankly, sicker than I ever had any desire to be. I have learned, since the first part of May, that I have severe sleep apnea...but I didn't know it. Sure I snored like mad when sleeping, would go to sleep at the drop of a hat, talked in my sleep and moved around constantly when sleeping. But I always considered that to be normal. Silly me. It wasn't! How I learned about this, in a nutshell, started to become apparent on April 25, 2017. My wife picked my up at church and when I got in the car, I told her to take me to the E.R. What's interesting is the fact I don't remember that...or anything else for the next four or five days. As I've been able to reconstruct things, when I got to the E.R., there was essentially no oxygen to the brain. This resulted in my being intubated and medically sedated for 3 1/2 to 4 days. I got out of the hospital after 8 days. Strangely enough...and thanks to the grace of God...my brain still functioned and there has been little if any brain damage. If you want something that keeps you humble...or that will make you humble if you haven't been...is that fact that most doctors, nurses and P.A.s that I've had contact with since waking up in the hospital keep referring to the fact that my mind still exists and functions normally as a 'miracle' and 'fortunate'. Me? I keep looking up from time to time and saying "Thank you." There is a lot more I could tell you, but the bottom line is that the completion of all of my model commissions have been slowed way down, many of which will end up as builds on this forum and possibly as more detailed ebooks as well. How soon will they all be done and I will back on something approaching a normal schedule? I can't say but I'm working as fast as I can. The C-46 should be the first post-illness project finished, so if everyone just hangs in there, the C-46 should be done in the next couple of months at the latest.
-
Selling the best sets (consumer rating) of Metallic Details: MD14405 Detailing set for Zvezda kit "Boeing 777-300 ER" (1/144, Zvezda, Photoetched) - $13.56 (+$7.30 cost of delivery)Set contains parts for detailing the exterior of the aircraft. The set contains: 1 sheet - 90*67 mm. MD14404 Detailing set for Zvezda kit "Boeing 787-8 Dreamliner" (1/144, Zvezda, Photoetched) - $11.00 (+$7.30 cost of delivery) Set contains parts for detailing the exterior of the aircraft. The set contains: 1 sheet - 90*65 mm. MDR4802 Nose cone for model aircraft MiG-23 (1/48, Trumpeter, Resin) - $8.47 (+$7.30 cost of delivery) Designed for correcting the shape of the nose cone MD4816 SR-71 Blackbird. Grides and jet nozzles (1/48, Testors/Italeri, Photoetched) - $48.00 (+$7.30 cost of delivery) Set contains: 1 sheet - 113*136 mm, 1 sheet - 52*136 mm. MDR4804 SR-71 Blackbird. Inlet cone (1/48, Testors/Italeri, Resin) - $54.00 (+$8.50 cost of delivery) Set contains 8 parts to assemble 2 inlet cones MD7204 Detailing set for aircraft model B-29. Engine cars (1/72, Academy, Resin and Photoetched) - $30.00 (+$7.30 cost of delivery) 4 x Engine 8 x Compressor exhaust 2 x Landing gear bays MD14401 Detailing set for aircraft Airbus A319 (1/144, Revell, Photoetched) - $12.00 (+$7.30 cost of delivery) Set contains parts for detailing the engines, fold chassis, sensors, winglets, wipers of the aircraft. MDR4801 Nose cone for model Su-27 (1/48, Academy, Resin) - $5.00 (+$7.30 cost of delivery) Designed for correcting the shape of the nose cone model ssli> MD7202 Detailing set for aircraft Su-27 (1/72, Zvezda, Photoetched) - $7.20 (+$7.30 cost of delivery) MD4805 Detailing set for aircraft model B-29. Engine cars (1/48, Revell/Monogram, Resin and Photoetched) - $50.00 (+$7.30 cost of delivery) 4 x Engine 8 x Compressor exhaust 2 x Landing gear bays Payment: only PayPal (only prepay - Price + Cost of delivery). Delivery: Worldwide. Combined order.
-
I just finished my ACE Models PRP-3, battlefield reconnaissance vehicle. It was based on the BMP-1. The turret was replaced with a larger, two man turret and the 76mm gun of the BMP was replaced with a 7.62mm MG. It had a surveillance radar mounted on the back of the turret equipped with a fold-down antenna and an 80mm mortar mounted on the top, rear of the hull. I believe it was a breech loaded tube able to be loaded from inside the vehicle. Since the PRP-3 was an artillery recon track, I'm guessing the mortar was used for target marking. The kit was by ACE from Ukraine. It's a low-pressure injection molded kit with nice surface detail but very prominent mold seams and lots of flash. It was quite a bit of work to clean up the pieces, but trimming and testing produced pretty good fit. Out of the box except I replaced the mortar tube with Evergreen rod, added wire brush guards to the headlights and added a tiny bit of lead foil to the stowage straps on the side of the turret to give them some relief. I also drilled out the headlights and spotlight, punched out foil disks for reflectors and built up Micro Kristal Klear lenses. The headlights were shined up with Future and the spotlight got several coats of Tamiya clear red to represent an IR spotlight and add some color. I saw pics on the web of either red or clear spotlights so I chose the red. Weathering was a filter of Holbein burnt umber and a filter of Holbein "monochrome tint warm" which is a sort of beige. Then a dot filter of various colors I happen to have: white, black, gray, beige, burnt umber... Then, a no-name pigment I got at a railroad model store mixed with water. I slopped it on the lower surfaces, let it dry and then scrubbed most of it off with a stiff paint brush. Vision blocks are just little rectangles of dark blue decal that I cut out of an old RF-4B tail decal. I got this kit at the GraniteCon raffle a few years ago and including all the materials used, I've got about three bucks in it. Take that Friul Boys!
- 3 replies
-
- 1
-
-
- BMP
- soviet armor
- (and 2 more)
-
I just finished my ACE Models PRP-3, battlefield reconnaissance vehicle. It was based on the BMP-1. The turret was replaced with a larger, two man turret and the 76mm gun of the BMP was replaced with a 7.62mm MG. It had a surveillance radar mounted on the back of the turret equipped with a fold-down antenna and an 80mm mortar mounted on the top, rear of the hull. I believe it was a breech loaded tube able to be loaded from inside the vehicle. Since the PRP-3 was an artillery recon track, I'm guessing the mortar was used for target marking. The kit was by ACE from Ukraine. It's a low-pressure injection molded kit with nice surface detail but very prominent mold seams and lots of flash. It was quite a bit of work to clean up the pieces, but trimming and testing produced pretty good fit. Out of the box except I replaced the mortar tube with Evergreen rod, added wire brush guards to the headlights and added a tiny bit of lead foil to the stowage straps on the side of the turret to give them some relief. I also drilled out the headlights and spotlight, punched out foil disks for reflectors and built up Micro Kristal Klear lenses. The headlights were shined up with Future and the spotlight got several coats of Tamiya clear red to represent an IR spotlight and add some color. I saw pics on the web of either red or clear spotlights so I chose the red. Weathering was a filter of Holbein burnt umber and a filter of Holbein "monochrome tint warm" which is a sort of beige. Then a dot filter of various colors I happen to have: white, black, gray, beige, burnt umber... Then, a no-name pigment I got at a railroad model store mixed with water. I slopped it on the lower surfaces, let it dry and then scrubbed most of it off with a stiff paint brush. Vision blocks are just little rectangles of dark blue decal that I cut out of an old RF-4B tail decal. I got this kit at the GraniteCon raffle a few years ago and including all the materials used, I've got about three bucks in it. Take that Friul Boys!
-
Final gallery ... Photos from workbench : link
-
First photos ...
