Jump to content

Mark Deliduka

Member
  • Posts

    5,923
  • Joined

  • Last visited

  • Days Won

    233

Posts posted by Mark Deliduka

  1. Now after all the effort to putting all my ground vehicles on parade for inspection, it's time to start a new tour. This one will mostly be in the Hangar and Shipyards as we've been focusing on projects in those departments. Now that we've reached that milestone, it's time to get some long time projects off the workbench and on to the shelf. So, without further ado, let's all board the trams and see what's happening at Maddog Manufacturing.

     

    Starting in the Hangar, we have these projects going, most of which are quite large and been sitting idle for awhile. First, let's visit this first bay where we have a 1/72 scale MQ-9 Predator under construction:

     

    Basic assembly of the body and wings happened first. They didn't say in the instruction sheet that weight was needed in the nose, so that was carefully added later:

     

    full

     

    Later the engine and landing gear were added, that's where the weight issue was discovered:

     

    full

     

    Weight was carefully added and then all the final detail parts were added, this bird is ready for paint:

     

    full

     

    Next it it, we also have another MQ-9 Predator. Two came in the kit with options for two other versions. I chose to build this for my RAF, and now this one is almost ready for paint as well:

     

    full

     

    Moving on to the next bay, we go back in time with this Airfix 1/72 scale Dogfight Doubles set. It was a gift for me from a friend and avid WWI aficionado. The first plane from it is this British Se-2C scout plane that went together fast:

     

    full

     

    Later the engine was assembled and installed in place:

     

    full

     

    The beauty of this kit is that Airfix included these strut alignment jigs so the struts line up perfectly so we thought we'd try them out:

     

    full

     

    The jigs worked, simplifying the top wing mounting:

     

    full

     

    Later we got all the painting done on this. 

     

    full

     

    full

    While that was drying, we started on the other half of the Dogfight Double set, the German Eindecker E.II. Basic fuselage assembly was fast:

     

    full

     

    The rest of the plane fell together perfectly so we starting painting it as well:

     

    full

     

    full

     

    And now both of them are ready for final decals and rigging.

     

    Moving on to the next bay, we have a 1/72 scale Super Model Italian Macchi C-205 that was sitting in a very broken up box. It was time to get that one done. Basic fuselage and wing assembly was quick as there weren't too many parts. What parts there were certainly had some pretty serious fit issues. The propeller is in a cowl that glues into the opening of the nose so the propeller will continue to turn. It'll be one of the last things I glue into place:

     

    full

     

    As you can see a lot of filling was needed for the gaps around the wing roots, under the plane and around select panels. You can also see how confident the pilot was in the abilities of his plane; he bailed out before it is done. Again, propeller assembly is dry fit into place:

     

    full

     

    Some judicious sanding and shaping and this is starting to look much better. The pilot is still MIA so we closed up the canopy and started preparing this for paint:

     

    full

     

    In the next bay, we finally got the fuselage halves together for the British Westland Sea King. It went together pretty well with only a little bit of persuasion:

     

    full

     

    There were some seam issues that got addressed and then the main landing gear sponsons got installed along with portions of the glass:

     

    full

     

    Now on to some of the Big Stuff. The B-66 Destroyer had been sanded smooth after the second coat of primer wrinkled up. Now a third coat was shot on it. Overall it looked fine, but there are a few small blemishes that will need attention again before a metal coat goes on this:

     

    full

     

    In the next bay is the Egyptian Tu-16 Badger, one of two we're building, here is a reminder:

     

    full

     

    The cockpits were painted, the cockpit modules were assembled and the engines were mounted on the fuselage halves of the Egyptian plane. You can see both cockpit modules here too:

     

    full

     

    We got one set of glass cockpit and nose masked and ready for paint:

     

    full

     

    To make things easier, we installed those parts to one of the cockpit modules; the fit is amazing:

     

    full

     

    Now we'll try to catch up on the Iraqi Badger so this is where this stands. Meanwhile in the next bay we installed the inside engine and landing gear nacelle to each wing of the Tu-142 Bear:

     

    full

     

    I decided we should dry fit this together to see what we're dealing with. Remember this is sitting on a standard TV tray:

     

    full

     

    Finally in this last bay, we have the British Airways Concorde, here it is with the cockpit module dry fit to the rest of it. This is alkso sitting on the same TV Tray:

     

    full

     

    Work was done on the flaps for this, all these ejector pin marks needed filling which we started after adding the actuator casing to them:

     

    full

     

    The tail feathers were attached after that:

     

    full

     

    Here's another shot showing how big this is again:

     

    full

     

    Later we got half of it inside the spray booth for another couple coats of white primer:

     

    full

     

    Yep, more paint will be needed for that.

     

    That concludes the Hangar portion of this tour, now on to the Shipyards....

     

     

     

     

     

    Here is the Shipyards, things have been slowly picking up. We even started this project here in this first slipway. This is the Revell 1/106 scale tugboat that I'd been gifted so it was time to lay the keel. Mind you the instructions are missing so everything done in this slipway is done sans instructions. Here's where this boat was after the the first few steps:

     

    full

     

    Yep, badly warped main railings. Glue was applied on the rear portions and then after it dried, we glued the remaining parts in with a bit of persuasion. That allowed us to get this far:

     

    full

     

    While that was all drying, we started on the main superstructure, again all sans instructions. It went together quite well:

     

    full

     

    A test fit shows how well this is gonna look:

     

    full

     

    That was about an hour's work. More projects were taking a lot longer. One of them that didn't was the main deck of the USS Enterprise; white paint was finally shot after the last of the masking was added:

     

    full

     

    Later we'll paint the yellow portions and then see how much cleanup I'll need to do before moving on. 

     

    Finally in this last slipway, the Robert E. Lee was slowly being built up. The outer railings were added to the two lower decks; Pyro did it right making them one piece that spans both decks. Even so, due to issues from earlier deck and bulkhead misalignment and some slight warpage these still took a lot persuasion:

     

    full

     

    Some of those issues, I am not sure how I'll address them.

     

    Still, more progress was made building up the Texas skylights, Texas deck house, pilot house and other minor details. We had also re-sanded and re-shot the main stacks so I decided to dry fit them here for this picture. The Lee is starting to look like a steamboat:

     

    full

     

    Finally, as we drive by the Motor Pool on the way back to the main lobby, you can catch a glimpse of one of the newer projects to expand the land forces again; we started an Egyptian Su-100 for my Egyptian Army:

     

    full

     

    Work will commence on that and others after the crew gets a good rest from vehicles. 

     

     

    Thank you again for coming on this latest tour; comments are always welcome!

  2. Wow Gil! This is why I stay out of 1/48 scale aircraft! And resin too! I shudder to think how many times I would have stabbed myself trying to build this plane. You are a true Master! I bow in the presence of Greatness!

  3. As you know, I completed my 900th model back in February. After some time, I was able to arrange to have all 900 of them placed on display at our local Knights of Columbus/St. Crispin's Irregulars hall. These were set up on 8x3 foot tables and numerous pictures were taken; and I kept them up for three days so people could come and see them all. I also edited these pics to be a bit bigger than usual so a little mode detail can be seen.

     

    Without further ado, here are the pictures of the:

     

    full

     

    The first thing I did was to set up all the German railroad equipment I have. I apologize for the poor quality of this pic, it's the best of all of them:

     

    full

     

    The the German Army was all set up in front of that. I was experimenting to see if I could get better pics, sometimes it worked out:

     

    full

     

    Next came the Russians as they were the next largest army in the collection:

     

    full

     

    In front of them came my US Army and US Marines. The Marines are on the far right:

     

    full

     

    I then placed my European and Commonwealth armies on the next table:

     

    full

     

    Finally, I added my Japanese and Middle Eastern armies to the last table:

     

    full

     

     

     

    And now, the entire collection for you to inspect. I apologize for the poor quality of these pics; I did everything I could to get sharper pics using notes everyone gave me the last time I posted my collection:

     

    full

     

    full

     

    full

     

     

     

     

    During this time I also took advantage of the opportunity to update individual armies. You've seen the biggest ones: German, Russian and American armies since they all have their own tables, so here's some specific shots of all my smaller armies for your closer inspection.

     

    We'll start with my British Army:

     

    full

     

    Here is my Australian Army:

     

    full

     

    my Canadian Army, everything in front of the flag:

     

    full

     

    my French Army:

     

    full

     

    My Italian Army:

     

    full

     

    My Swedish Army:

     

    full

     

    and my Polish forces:

     

    full

     

    Next is my Japanese Army:

     

    full

     

    Then my Iraqi Army:

     

    full

     

    My Syrian forces. The tank off to the left is a T-90 from India, I just haven't made a flag for it yet:

     

    full

     

    And my Egyptian Army:

     

    full

     

    Finally, here's my Israeli Army:

     

    full

     

     

     

    Just for fun after that I decided to take pics of some of my select groups of models. For instance, these two Sherman tanks with two different rocket launchers on top of their turrets:

     

    full

     

    Then there's these M109 Paladins:

     

    full

     

    Here's all my Stryker vehicles all completed:

     

    full

     

    This is every ambulance and fire truck I have:

     

    full

     

    And all my civilian vehicles from all countries:

     

    full

     

     

    And there it is, my entire collection of 900 small scale vehicles all on one set of tables. Now it's time to get started on the next 100 so I can reach my next milestone.

     

    Thank you all for looking in, comments are welcome and I appreciate all your support and compliments.

    • Like 1
  4. That's right, these are my first finished models for 2024, and also the accomplishment of another milestone. 

     

    First up is Number 896,  this is the Dragon 1/72 scale US Marine M103A2 Heavy Tank:

     

    full

     

    full

     

    full

     

    Nothing special done to it, just some light weathering. The next one is Number 897; which is a three-year-old shelf queen that I started when trying to complete the entire available SCUD line of models. This is the 1/72 scale Modelcollect Russian SCUD 😄

     

    full

     

    full

     

    full

     

    Next is a more recent model; the Trumpeter 1/72 scale US Army M1132 Stryker Engineer Squad Vehicle coming in at Number 898:

     

    full

     

    full

     

    full

     

    Number 899 is the 1/72 scale Foreart US Army M109A7 Paladin, which also completes the entire line of available Paladins in my scale:

     

    full

     

    full

     

    full

     

    And finally, Number 900 in my Braille Scale Armor and Vehicle Collection is this 1/72 scale Roden British Type B Omnibus Mobile Pigeon Loft:

     

    full

     

    full

     

    full

     

    Once again, this did come with pigeons which you can see here if you look close:

     

    full

     

     

     

     

    And that is my list of my first models completed in 2024. Now that this milestone has been achieved I will start focusing on my aircraft, ships and other miscellaneous models that I'd been setting aside to reach this milestone. Besides, the boys in the Motor Pool need a bit of a break for awhile!

     

    Stay tuned for another tour soon and also be watching here in the third week of March; that is when I'm arranging to have my entire collection set out on tables to be photographed.

     

    Thank you all for looking in, comments are always welcome!

    • Like 1
  5. Thank you Carlos! That bare interior just screamed for detail and; having had chickens in the past, I remembered how almost all birds like that like to roost in straw. It just made sense....

     

    Thank you David! It seems that Soviet/Russian equipment is the most numerous potential models for my collection as everyone seems to be releasing it in my scale. That you again for stopping in.

     

    Thank you Jean-Marc, Yes, they are still coming....

    • Like 1
  6. And now for our tour of the Motor Pool. There's a lot going on here that also includes a couple of started models as well. So without further ado, let's visit this first bay here.

     

     

    In this first bay we have the M103A2 Marine tank getting it's base coat:

     

    full

     

    After that dried, we added the decals and some detail painting. This one is very close to being done:

     

    full

     

    Speaking of almost done, in the next bay we have this Russian SCUD C that has been a bit of a challenge all this time. It finally got the correct launcher arms on it:

     

    full

     

    Then all of the new parts were painted up:

     

    full

     

    Later on we weathered the wheels and tires; put them together and installed them on this model. Some additional weathering was applied to the vehicle as well:

     

    full

     

    On this model, they had no call outs for decals, even though there was a full sheet of them included. Well, I had to add something, so this beastie now sports a Guards emblem on the doors:

     

    full

     

    Final weathering was added and the missile was sent out to be painted:

     

    full

     

    Yeah, that beastie is almost done too.

     

    Moving on, in this next bay is the Stryker engineering vehicle. It's got it's basecoat of green, now we just need to find the decals so we can finish this one too:

     

    full

     

    In this next bay is a model we previously started, it's one of two GAZ AAA trucks that has been slowly worked on between other projects. Here we have the cab half built and the bed installed:

     

    full

     

    Only a few additional parts were added to this:

     

    full

     

    In the interest of working on something fast and easy, we pulled out this M109A7 from Foreart and got started on it. Hull was done first:

     

    full

     

    While that was drying, we completed the basic upper turret assembly by adding many of the detail parts to it. We had been having difficulty with the gun mount so that is why we went this route:

     

    full

     

    The hull was indeed fast and easy, we got wheels and tracks, detail parts and everything else installed that wouldn't break with handling:

     

    full

     

    Finally we got the gun mount sorted and were able to finish the turret almost completely:

     

    full

     

    Yes, that turned metal barrel and 3-D printed muzzle brake came in the kit, not aftermarket. It's coming togfether nicely:

     

    full

     

    Next we assembled the turret baskets and then added all the photo etch to this vehicle:

     

    full

     

    Moving on to the next bay, we have this long-term shelf queen. It's the Modelcollect 1/72 scale BMP-3 with full cage armor! It has to have been close to nine years since I picked this up again. First thing that we needed to do was to try and assemble the turret cage armor. This was the result of trying to get the main parts at least completed:

     

    full

     

    Here's our first attempt to mount it on the turret. I figured it would be easier putting the straight lengths of the rear cage on after the main parts had dried:

     

    full

     

    It got done, but still looks like crap! Even then something was off on it:

     

    full

     

    Our attempt to fix it resulted in the loss of a strut:

     

    full

     

    While that was drying, we went ahead and installed the tracks on the wheels and sprockets. These tracks will be covered in deep skirts so we only did the lower runs of track:

     

    full

     

    In testing this in the hull, we found numerous protrusions on the bottom of the cage armor that kept snagging on hull parts... and I hadn't even put in all the hatches and such:

     

    full

     

    Eventually, we attached all the hatches and other additional detail parts to the main hull. Some filing had been done on the bar armor, but it only helped a little:

     

    full

     

    I originally had hoped to paint this with the three tone camouflage, but that ain't gonna happen. Now that the turret is mostly completed, it got a coat of the base color that I'll be painting it:

     

    full

     

    After all that, we wanted to get back to a simple build, so out came this Academy 1/72 scale French Le Clerc tank. Upper and lower hull got assembled first:

     

    full

     

    Then the wheels and sprockets were added, later the tracks went on:

     

    full

     

    Finally, the turret was completed, the tracks added and the side skirts installed:

     

    full

     

    And that quickly, this was ready for paint:

     

    full

     

    Finally, in this last bay, I decided that the last Roden bus I needed to build should be done. Out it came and the main body and chassis were assembled:

     

    full

     

    We then added the interior and painted it:

     

    full

     

    The underside got the suspension installed afterward:

     

    full

     

    While that was drying, the pigeon loft was mostly built:

     

    full

     

    It made for a pretty good fit. This is only dry fit too, I want to keep it separate until everything was done before it gets cemented in place permanently:

     

    full

     

    After that,the lower part got painted, the wheels and fenders got installed and the main window covers went on:

     

    full

     

    Once that was sufficiently dry, the remaining headlights, steering wheel, and other detail parts were added:

     

    full

     

    The top pigeon loft was also painted and for fun, here it is dry fit again on the bus:

     

    full

     

    While that was drying, we went to work detailing the pigeon loft. Pigeons like to nest in straw, so we added some to the pigeon loft interior:

     

    full

     

    We used this rough twine cut into 1/8th to 1/16th inch lengths:

     

    full

     

    Then we slathered the floor with Gator Grip glue and poured the straw inside, pressed it down and then shook the loose straw out:

     

    Now that the straw was in place, we started adding the screen material on all the sections we could before closing it up:

     

    full

     

    Once again the loft was dry fit in place, and the pigeons came home to roost:

     

    full

     

    I expect that in a day or so, we might have this bus finished!

     

     

    And that concludes this latest tour of Maddog Manufacturing! I do hope you enjoyed the latest progress we've made here. As always, comments are welcome, thanks to all who came in to take this tour!

    • Like 1
×
×
  • Create New...