-
Posts
251 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Events
Posts posted by wedfactory
-
-
-
-
A very eye catching and interesting build!
- 1
-
-
-
-
Or you could sand the opening just a little larger so the wings and openings either barely or don't touch.
-
Best I can figure is to get the best AOA for takeoff.
-
-
Things learned so far:
ABS plastic is quite tough. Stronger than most model plastics but not as brittle as resin. Some where in between.
Tamiya glue doesn't work all that well with it. I have to leave it over night before I couldn't pry the pieces apart. Super glue worked a lot better. have to try Tenex 7R yet.
It seams to be quite porous on the edges as a sharprie I was using to mark it was soaked into the plastic.
Will have to try paint on it next to see how well it take or if it will need a good primer before painting. -
-
-
-
-
-
-
-
I just use the OOB for a break from the more "serious" builds I like to do.
For giggles and grins take a look at the Sea Shadow I started in the ship section.
-
-
-
Started work on the bridge of the Sea Shadow. i didn't like the decals that came with the kit for the bridge so I dug out some old aircraft IP decals and cut those up.
The back wall. The tan piece of paper below to the right was the decal for the back wall controls. I like my kit bash decals better.
And for the pilot seat all the kit had was the decal on the floor. Again I like my kit bashed controls better.
Now will you be able to see them when I am done. Don't know how well yo uwill ba able to see into the bridge once it is closed up. -
OK, I admit it, I have the attention span of a 3 year old, couldn't sit still while waiting for the HO-229 to dry started another kit. Picked out my Sea Shadow. Just doing this one OOB. May even get it done for the March 28th model show. Just sprayed all the interior grey, Not sure how much you will see but decided to play it safe and spray everything inside.
OOh!! Look the 229 is dry! See you later! -
-
The Haul, or what you've recently bought.
in General Modeling
Posted
I need to make a trip down to Corpus Christi. I have 3 of my models on display on the USS Lexington.