Jump to content

Joev259A

IPMS/USA Member
  • Posts

    71
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Joev259A

  1. Well, that makes a lot of sense! I may have some old Testors MM paints like that. In fact, I'm planning on having both Atholl and Sidewinder missiles mounted on the rails. Thanks!
  2. G'day all. I'm starting to build for a display a 1/72 scale F-16 in the blue Ukrainian AF colors. Another modeler is sending me the digital camouflage scheme that I'll have to cut and fit, but does anyone know what the blues that they use? I know it'll be fictitious, but it'll look neat! I have some Testors MM, Tamiya paints, etc. If there's FS numbers I can work with that. Thanks!
  3. Wow! That's a good start. I believe the truck is a 1961 or so. Thanks for the information
  4. G'day- I've been asked to paint a Mack truck in the color of "Mack Green." I think this is lighter than a hunter green, but any suggestions? thanks!
  5. Thanks. I found what appears to be Cummings engines on EBay, and heavily converted them. Building crash trucks are pretty easy since they're "slab sided." I wrote an article for IPMS, so we'll see when it's published. A question-- what does the "P-" signify? USAF never responded.
  6. Thanks for the reply. this is a color profile of what I have. As to the wings, I will probably estimate where the bands would be located, most likely the same width as what's on the fuselage.
  7. G'day- I am gathering research information on a Hawker Seahawk; 806 Squadron. This jet has the "Ace of Diamonds" logo on the fuselage sides. According to a Modelaid magazine profile, there is a red-white band around the fuselage (illustrated), and it also references a red-white band around the wings, which is not illustrated. Does anyone have any information on where these bands are located, and whether the red is on the outside? I am thinking my next option is to contact on of the UK museums. thanks for any feedback. Joe Vattilana IPMS/Delaware Valley Scale Modelers Unknown-2
  8. Thanks. One thing about Air Force crash trucks. They're all business-- no curves, just bulk . . . .
  9. Thanks. I needed a scratch built project during the pandemic. This was all squares, etc., so it was chosen. I was lucky to find some engines that worked for this. I HAD to open up the doors for this.
  10. Attached are photographs of my 1 1/2 year scratch build 1/25 scale P-2 crash fire truck. Length is approximately 16 inches. Wheels and tires are custom bought from American Industrial Truck Models out of New Jersey, seats are from an American LaFrance ladder truck, engines were bought on E Bay and are modified to look like the earlier gasoline engines, and a couple of transmission parts from a Russian truck. The rest is sheet styrene and tubing. Since this is a military vehicle, and I've never seen one in civilian markings, I posted this under the Armor Forum.
  11. Thanks for the information on this. I was wondering if anyone had colors on a Polish tank in WWII.
  12. G'day. I have a 1/35 (Polish manufacturer) kit of the 7TP light tank. This was used around 1938-1939. They call for a three tone color scheme of Olive-Green (Khaki), dark brown, and sand yellow (ochre). Could anyone suggest paint colors, or should I just go with whatever Testors/Humbrol paint labels? I think the Olive green may be a light greenish tint, and the sand yellow somewhere in the Middlestone tint. Any help from my "associates" is greatly appreciated. Joe Vattilana
  13. Thanks. I found the way of copying pictures from my files to this.
  14. "Kuklinski's Principle of Appearance: A half-built scratch built kit impresses people with your skill; a completed scratch built kit looks just like any other model." I have included a picture of my in-progress scratch built 1/25 scale FWD P-2 crash fire truck. I have been working on this since March, 2020. The body is more of less complete, except for the battery compartment (the opening on the lower, center of the body). Everything is pretty much scratch built. It's about 16 inches long, 5 inches high and about 4 1/2 inches wide. The tires are resin from American Industrial Truck Models, and some parts from the AMT American LaFrance pumper kit (mainly just the seats). The next "adventure" is building the transmission, steering, and engine assemblies. I have more pictures but I can't seem to download them. I have a question for you folks: I need to scratch built two "straight six cylnder" gas engines. Any suggestions on where these can be found, or modified? I may have to scratch build these too.
  15. I may try the tape technique. Thanks for all the feedback.
  16. I am scratch building a truck and I was wondering if there is a way of making the seal around the windshield and other windows. This will be 1/25 scale. Thanks for any guidance! Joe Vattilana
  17. G'day- I have a (Polish kit) of a 1/35 scale 7TP light tank. They reference colors of Olive green (khaki), dark brown, sand yellow (ochre), and dark grey. Would anyone know what paint colors to use for these (preferably enamels)? I have very limited knowledge on World War II Polish tank colors. Thanks! Joe Vattilana
  18. Ok, thanks. I'll consider that next time. Joe V.
  19. Thanks for the responses. I just bought the "package" about a week ago, so it's fresh. I re-read the directions (surprise there- never did that building models!), and it's a 1 to 1 mixing ratio by volume. The only things I can think of is my process- maybe not stirring it completely, etc.
  20. G'day. I bought the Micromark resin casting kit to cast some seats. I was able to make a master using the rubber latex material, however, after the resin casting "cured," it came out a powdery white, and crumbled. Needless to say the castings weren't usable. Any guidance on this? I'm assuming the Parts A and B were not poured out in specific equal parts. Thanks! Joe Vattilana
  21. Duh! I meant a Tamiya CENTURION Mk. 3 !!!!
  22. G' day- I have a Tamiya Mk.3 tank that I understand the Swedish army used at one time. It was called the Stridsvagn 81. I was wondering if anyone has information on the color and/or color scheme. I thought it could be the same color as a British Mk. 3, but I thought I saw something that they had a splinter type camouflage pattern. I tried the IPMS Sweden forum, but it's all in Swedish (go figure!). I have another British scheme that I may use if this doesn't work out. Thanks for any information. Joe Vattilana
×
×
  • Create New...