Jump to content

MAShelley

IPMS/USA Member
  • Posts

    33
  • Joined

  • Last visited

Everything posted by MAShelley

  1. I checked the hotel website a couple of days ago, and it also showed sold out, but as a Hilton Diamond member, it would let me go ahead and book a room. . . for $880/night. I'll wait for the block to open up, thanks.
  2. At the risk of making this a zombie topic (i.e. raising it from the dead)... I just put Tamiya masking tape on the canopy, burnish around the frame with a toothpick, and cut off the excess with a (preferably new) blade. Usually multiple small pieces are needed because of the curvature. A more detailed discussion (with other methods) is at https://modelpaintsol.com/?s=canopy+masking&post_type=guide Or if you have a vinyl cutter you might try searching at https://www.scalemodelpaintmasks.com/ I have no affiliation with either of these sites.
  3. I've used invisible thread (about 0.004") and strands of wire pulled from broken audio or computer cables. I have some Uschi elastic rigging thread but I haven't had success with it yet. (User error, I'm sure.) To my eyes, guitar strings look too large for 1/72 scale.
  4. One thing I like about Celluclay is that you can easily color it. Adding a blob of acrylic craft paint in the mix will tint the whole batch. That way if it does shrink or crack, it isn't as obvious.
  5. Nice. I've got a Hubley Duesenberg (the town car) in the closet that's been half-finished for 40 years.
  6. I like the T-38, but I haven't seen a lot of 1/72 kits out there. There are a few in 1/48, which I believe already have NASA markings available. I'd like to see an ER-2 but not holding my breath. When it comes to cars, tanks, etc, I got nothing.
  7. Hi Dan! Texas Outlaw Modelers Society is not defunct, it was just resting. I believe we've applied for a charter but it hasn't gone through yet. No real website, but there is both a page and a group on Facebook (https://www.facebook.com/TexasOutlawModelers/). Meeting info can be found there.
  8. Very impressive! Are those the kit wheels or aftermarket?
  9. I also use Walthers Solvaset, mainly because that's what I have on hand. If it's too strong for the decals that I'm using, I dilute it with a little distilled water. I've also used floor polish (Pledge with Future Shine) and it works okay.
  10. For #1, we use an Excel spreadsheet. There are some formulas in the background that create a long text string of everyone's email address that can be cut-and-pasted into an email. I find this easier than managing a mailing list for a particular piece of software that the next secretary may not use. I can't speak for #2 since that is handled by someone else. However, we also have a #3, which is 'members plus other people in the region that we want to advertise our show to.' This is handled using Constant Contact. I can't provide an opinion on it since I don't manage that list. We also have a Yahoo Groups list, which is free and pretty easy to manage, but everyone seems to have forgotten about it and no one knows who the administrator is. Keep good records! mas
  11. IPMS-Houston Presents ModelMania 2015 Just southwest of Houston at the Stafford Centre, 10505 Cash Road, Stafford, TX This year's theme is "Technicolor" General Admission $5 for adults, $2 for children, waived if you are entering the contest. Doors (and vendors) open at 9am Judging begins at 1pm Awards ceremony at 4pm For more info see the website at http://www.ipms-houston.org/ Or contact show director Tom Moon tmoongm@gmail.com Here's the flyer: ModelManiaPamphlet2015ver08.pdf
  12. Looks great! Any suggestions for a reference on the differences between the N and G versions? (I have a 1/72 104G in the closet.) Now you just need an XB-70 to go with it.
  13. It also works great on clear parts. Just dip them in a cup of the stuff, or brush it on. Makes plastic look like glass.
  14. I've successfully shot Vallejo Surface Primer (the grey stuff) at 15-20 psi unthinned with a gravity feed airbrush. I tried thinning it a bit with windshield washer fluid (which is just water and alcohol; a good cheap thinner for acrylics) but it didn't improve it. While spraying it looks like it pools up in corners, but does indeed dry tight and smooth. My notes say it tends to dry on the needle, and if you mix it with lacquer thinner it makes goop, so don't try that. Overall I like it. Tamiya in a spray can is easier to use, though.
  15. I'd also like to thank the organizers and volunteers that put on this year's CALMEX. I thought it was a good event.
  16. I like the Xuron 2175ET, but I have had problems with using it on very small and delicate parts (Roden 1/72 biplane interior struts, to be specific.) It has worked fine on everything else.
  17. A compressor designed specifically for airbrushing will be quieter and smaller than a general-purpose compressor. That's the only real advantage I can think of. Mine (a Grex) doesn't have a tank, so it cycles on and off frequently as I spray, but I'd rather put up with that instead of the deafening racket of the Sears 10-gallon that sits in a corner.
  18. Two regulators should work fine, but I can't think of any benefit from using more than one. The brush will get whatever the lower pressure setting is. (As long as you have them in series with one another, not in parallel.) I started with a Sears version of a Badger 200 single-action in the late 1970s (I think) with a 1.5 hp compressor and 10-gal tank. Just upgraded to a Grex TG3 (or TG2; I forget) and dedicated airbrush compressor last year. No tank on the new one, but it seems to work just fine. I still have to do a lot of sanding and repainting, but that's operator error and not the fault of the equipment.
  19. If you want to be really paranoid cautious, make a color scan of the decal sheet before you start. Then if all else fails, you can print a new set on decal paper.
  20. I shoot/brush it straight and clean up with windshield washer fluid. It's not even Future (I think the official name is Pledge with Future Shine); I use an old jug of Brite. Seems to work just as well.
  21. If your tap water is anything like mine, then distilled water is required to avoid white deposits.
  22. I know Wikipedia isn't always the most accurate source, but it mentions that the original configuration had three domes and a balloon stack, which would change the look quite a bit. Oh, and it orignally had wide gauge wheels. Most likely no one but you would know the difference. (Details like that keep me from making much progress on converting locomotives to match my chosen subject.)
  23. Have you tried looking in model railroading books and magazines? They often include scale drawings of buildings. Most of them are railroad-related, of course, but there should also be a selection of houses, factories, sheds, etc. for several different time periods.
  24. Generally I don't buy a tool until I get into a situation where I need something that I don't already have. You can accomplish a lot with just a few of the basic tools. However, the two I always use are: 1. good lighting (I have a small Ott-Lite) 2. Opti-Visor or other magnifier. Other than those, I have nothing to add.
  25. "Sunshine Cleaning" has one or two model-building (and one crashing) scene. The crash sets up one of the best lines of the movie, in my opinion.
×
×
  • Create New...