Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 09/12/2013 in Posts

  1. 4 points
    My model is the Italeri 1/72 scale Fiat CR-32 Chirri." It represents an aircraft assigned to XXIII Grupo Caccia, Aviazione Legionaria. The unit was led by Lieutenant Colonel Andrea Zotti and based at Puig Moreno, Spain, June-July 1938. The unit formed part of the Italian contingent fighting for the Nationalist cause during the Spanish Civil War. I used the Osprey Fiat CR-32 Aces of the Spanish Civil War (Aircraft of the Aces 94) for inspiration; profile 28. I wanted to model Zotti's aircraft; he flew "3-4", but I only had the decals for "3-6". The model was built out-of-the-box except for the rigging. Took me 3-months to figure out I can't paint Italian camouflage with an airbrush freehand and another 3-months and a lot of Tamiya tape to manage that effort. I enjoyed the build; never worked harder to complete a model...
  2. 3 points
    This is the Platz 1:72 kit with Eduard photoetched interior panels, modified control columns, and True Details seats. I added wiring the seats, scratch-built the canopy piston housing and the canvas cover over the rear panel from CA-impregnated tissue paper, and cut the kit canopy. The wheel wells were detailed and the airbrakes were re-built and their bays were detailed. Anti-torque scissors were stolen from an F-80 photo etched sheet. The decals were sourced from 14 different sheets from Iliad, SuperScale, Fox One, AeroMaster, an Italeri B-66, and even a MicroScale railroad sheet. Weathering was limited to a wash and some scuffing on the non-skid panels. I finished it just in time for a club contest - but, since only four or five people finished their T-33s, the contest was moved to March!
  3. 3 points
    Model built for a Local Boy Scout Troop to Honor a local pilots service. P-38J from 394th FS of the 367 FG. Pilot perished in the channel on July 20 1944. Pilot was 1st Lt William L Mushrush from Steubenville OH Minecraft 1/48th P-38J with True Details interior, Eduard tires and Karaya gun barrels.The Aftermarket stuff way surpassed the Minicraft kit. Uschi Lines for antenna into a filament spring( Which you really can't see🙃) Alclad Polished Aluminum over Gloss Black Thanks for Looking Regards Bill D.
  4. 3 points
    Let me re-make a point here. Where is it written that a person MUST care if they win or lose at the contest? I know several people who attend, put the model on the table, and enjoy the rest of the convention without another thought about the contest. They enjoy looking at a roomful of models without it impacting their self-worth. Winning an award is gravy.
  5. 3 points
    I finally finished this baby last night. My first competed build for 2019. It's the Tamiya kit built in Operation Iraqi Freedom (thanks for correcting me, Rob) scheme. I used mylar for the optics and a resin set from Red Zebra for stowage. I also printed out cardboard boxes for MREs from Freddie's set and assembled them for a neat look that breaks up the stowage on the tank. I added a boom mic to the tank commander with copper wire. I used the hairspray technique on this one and tried to bring out the NATO woodland scheme underneath like the original. It didn't work out too well in that the top coat was very tenacious and didn't want to come off easily. Final weathering with Wilder oils and Flory pigments. I also made use of an item called "ceramic wire" for the aerials. I'm pretty satisfied with this build. The kit is highly recommended.
  6. 3 points
    I've finally completed a kit! For me it's nothing short of amazing! 😊 This is the Trumpy Type 63 107mm rocket launcher. I've got the Revell-Germany MAN 5T Mil GL truck about to move to the paint booth right now.
  7. 3 points
    A simple graphic illustration of why Telford works for The UK but not here.
  8. 3 points
    http://culttvman.com/main/a-modelers-guide-to-painting-the-starship-enterprise-by-gary-kerr/ http://culttvman.com/main/a-modelers-guide-to-painting-the-starship-enterprise-pt2-by-gary-kerr/
  9. 3 points
    Sorry, but your first model is just not complicated enough. Well, now I have to go shoot myself. Make sure you keep posting photos. So my survivors will know why I offed myself.
  10. 3 points
    Actually it works best if you use an "Old Guy" computer!
  11. 3 points
    Yes! I look forward to buying you a beer! And we can discuss whether the line between passion and insanity is raised or recessed. Regards, Nick
  12. 2 points
    Since there's a new 1/48 B-17G being released, I decided I needed to build my old Monogram kit! Model was built OOTB. Decals are from PYN-UP. Kept the weathering on the lesser side since this was a low-time plane that flew only about 10 missions. This kit takes some elbow grease and planning, but still goes together well for its age. By the way, the wayward gun barrel on the top turret has been repaired! Didn't get every result I'd hoped for with this build, but I finally have this nose art I've wanted on the shelf! Comments, questions, and critiques welcome! Cheers! GIL
  13. 2 points
    This week’s update on the PZL-23B covers the fuselage and wing details. I assembled the wings and then added the photo etch details like the entry steps and hand holds, wing joint covers, and aiming scales to the nose. The engine was then mounted. I needed to paint the base coat on the fuselage prior to mounting the exhaust as it runs along the fuselage. The underside was painted using light blue and the top was painted olive drab. The two color reference photos depicted a panel pattern on the wings. I duplicated this by adding a little green drab to the paint and painted the alternating panels on the wing tops. The main landing gear shrouds house landing lights. The kit provided the clear covers for them but no details behind them. It was just an open hole. I used a clear sprue from my scrap bin that was fit into the hole. I trimmed it flush then drilled into it with a drill bit to make the reflector. Then a smaller drill bit to make the bulb area and finally a tiny one to simulate the filament of the bulb. Stay tuned as next week as I apply the decals and final paint to finish this unique Polish aircraft. You can see all the details and photos from the start in my build log at https://davidsscalemodels.com/build-log/1-48-pzl-23b-karas/
  14. 2 points
    Finally the last of my Christmas presents came in. This is several sets of 1/72 scale resin tracks for a few different tanks. I got these to replace the tracks on several of my older models that lost them for whatever reason. I also got the AMX-30 tracks to replace the horrible ones on my French AMX-30 from Heller: That's it until my birthday....
  15. 2 points
    I agree. Back in 2003 when I chaired the Nats in OKC, everyone I talked to said a slide show at the awards ceremony just couldn't work with programs available at the time. Guess what. We figured it out and the slide show came off without a hitch, WITH the program everyone had failed with before OKC Metro. Never be afraid to try something new and different.
  16. 2 points
    After standing in the lobby in Chattanooga for over an hour waiting for my chance to get the early white box release, I figured I better go ahead and build the dang thing! This was an OOTB build, except for adding some Eduard seat belts. The markings are all from the spares box, except for "Pudgy". I drew those letters on yellow decal sheet and then cut each out individually. Not perfect, but close enough for Gil World! The red and white markings were all painted. The markings are for McGuire's P-38F that's depicted on the cover of the "P-38 in Action" book. All in all this kit is da bomb! The main landing gear doors are engineered so that they simply slide into place, no glue needed! Same for the drop tanks when added to their pylons! If you want to build an early Lightning, I highly recommend you give this one a try! Questions, comments, and critiques welcome, as always! Gil
  17. 2 points
    Here's a trip down memory lane for you modelers "of a certain age". This kit was first released in 1958 and It was state of the art at the time. It has decent engraved panel lines, was light on the rivets (but I sanded them off anyway), and had the embossed decal locators, which had to be removed. I replaced the gear doors as the kit ones were just too thick and the decals are cobbled together from my spares as the ones in the kit were much too yellowed to use. The finish is Alclad over some panels primed in flat and the rest in gloss black. It I could have produced this model and taken it to a contest in 1959, I might have won something, but today, it's just a nostalgia piece, but it was fun to build.
  18. 2 points
    The ancient Monogram HU-16E Albatross, built OOB. Markings are USCG early 1960s, from the Print Scale sheet. The mold dates from 1957, kit was real pain to build. I glued the “moveable” gear in the down position to make it sturdy, and added some lead shot to keep the nose down. Paint is Tamiya white and some of my hoarded MM “Coast Guard Red-Orange” from their discontinued Marine colors line. All the orange bands and black stripes were painted- lots of masking there! I was impressed with how well the Print Scale decals went down over the big rivets... DUKW is the Italeri kit, in USCG colors from the same period....also OOB. Photo courtesy of Pip Moss.....
  19. 2 points
    This weeks’ update on the AH-64D Apache Longbow covers the assembly and details of the fuselage. The landing gear was built and detailed with photo etch. The fuselage had some vents cut out and replaced with photo etch parts. I drilled a hole thru the vent then cut out with a hobby knife and finally shaped with a small file to fit the photo etch piece. The engine exhaust was then assembled and detailed with photo etch. Once assembled the fuselage was base coat painted with the black green color. Have a few more details to add to the fuselage then on to the rotors and chain gun. You can follow the build in my build log at https://davidsscalemodels.com/build-log/1-48-apache-longbow/
  20. 2 points
    my first movie crush, the 13 yr old me wanted some princess.
  21. 2 points
    Here are some more photos of the build. The model was pretty easy to paint; overall MM Acryl Army Helo Green (FS 34031) on the outside and on the inside I used Tamiya NATO Black. Other shades were also used to break up the overall colors. The inside of the engine area was MM Yellow Zinc Chromate with a mist coat of fluorescent green from the square bottle in the transmission area. Adding the Zactomodels exterior set really helped the kit also. So, here they are... I used Lite Bright pegs for the screens on the IP. I wired up the Disco Ball and the tail area. On the rotor, I placed dots of red, blue, green and yellow with a toothpick for the maintenance indicators. I also made umbilicals from the fuselage to the weapon stations. After everything was together I gave it a dry brushing with Tamiya weathering powders.
  22. 2 points
    After a nearly 2 1/2 year hiatus from scale modeling, I chose this project to blow the dust off of my creativity. All told, I spent about a month from start to completion. This model depicts a Bf 109G-6 of 7./JG3 -White 10 + Black I, Bad Worishofen, 1944. The venerable Hasegawa kit speaks for itself, and there is no issues with assembly. In fact, there was no filler needed anywhere on the airframe. The only aftermarket I added was an Eduard PE seat harness. Chrome Bare Metal Foil was wrapped around the hydraulic oleo struts. The markings were from an 18 year-old Cutting Edge (Meteor Productions) sheet. Back in the day, Cutting Edge decals were my go-to for aftermarket markings. This sheet, however, gave me fits. The spiralschnauze would not lay down, so I substituted it with one from an old Eagle Strike sheet. After, of course, sanding the spinner clean and repainting/glossing. The meteors fractured in several spots, necessitating touch-ups with white paint. But, the strangest thing was the fuselage Balkenkreuze-both sides, after being set with Mr. Mark Softer, and clear coated, weathered, and semi-gloss coated-lifted from the plastic and bubbled up! Granted, the Mr. Mark Softer was maybe 6 or 7 years old, and there was not much left in the bottle, so that may have played a factor. So, I stripped the fuselage of those two decals, cleaned up the areas, re-painted the areas, re-glossed the areas, and used the kit’s markings. These performed well. The antennae wire is stretched sprue. Having not completed (or really worked on anything for that matter) for nearly three years made this project a humbling experience. There’s a lot of room for improvement, and I have a lot of work to do in the future. Thanks for looking…
  23. 2 points
    I agree, but at the same time realize these are things often hard to judge without first hand knowledge. Every operational vehicle I have been on or in is covered with foot prints. Still, many build their models as a case of immaculate perception. But it isn't fair for someone to do things correctly, but lose to a model with a lot of inaccurate, but aesthetically appealing details. I would love to see someone do a piece for the Journal on the basic dos and don'ts of modern armor stowage. It wouldn't have to be an in depth thing, just a photos and such showing authentic things. The more people know will make them better builders and judges. Dak
  24. 2 points
    I've had this one done for a while and just got around to rigging it. Usual out of the box with a minimum interior added. The decals were way gone and I didn't want to spend stupid money for new ones, so these are spurious markings I cobbled together and a paint scheme that is an amalgam of several I have seen. The rockets were used to shoot at zeppelins and observation balloons, but most sources cannot site where one was actually shot down with them.
  25. 2 points
    Excellent work. Just for comparison, here's the first model of this vehicle in 1/35/2 scale, the old Monogram one. What a difference 40 years makes.
  26. 2 points
    Since when did abdominal laparotomy sponges become a household item? 😳 Does the Health Department know about this? 😀 Nick Filippone
  27. 2 points
    OK, its not a real TNH, but the Tamiya 1/48 Panzer 38(T). The tank was developed in Czechoslovakia just before the war started. As a matter of fact, it wasn't even in service yet when the conflict began, so this example is rather spurious in its markings. The Germans thought so much of the vehicle they modified them slightly and equipped whole armored divisions with them (Rommels 7th in France for one) right up to the Russian campaign. The 37mm gun was as good or better as that mounted on any German tank at the time (with the possible exception or the Mk IV, but that 75mm was a short barreled infantry support weapon and besides that there were very few of them, even in France.) the armor was comparable and it was very dependable. The camo is typical per-war Czech camo. The little flag on the turret is from my imagination. I can't find many photos of pre-war Czech armor in Czech service, but it seems logical they would have some sort of national markings on their vehicles. I did this one strictly OOTB. These 1/48 Tamiya kits are just a delight to build. Fit is excellent and detail is very good. Tjhe length and link tracks are nicely done, but can be fiddly to get right and you can see a couple of my problem areas if you look closely. If you're not an armor builder but wonder what all the fuss is about with armor models, give one of these 1/48 kits a try OOTB. I bet you'll have fun with it.
  28. 2 points
    This is what I have been working on for the last few weeks. Love these kits. This makes #6. The base kit builds like this: MK44 AmmoKnight. But I glued on a few greeblies and used lots of putty. To get to this point. I'm still tinkering with tiny details but the majority is finished.
  29. 2 points
    The first thing we need to do for our own PR is talk up modeling when ever you can. Modeling is a solitary hobby mostly done by yourself in your hobby room so a Society like IPMS/USA is a great way to make new friends and meet people with like interests. My own experience came over 33 years ago when I joined my local club and was the only automotive modeler in the group. Took some time to get in with the group but I helped myself by inviting other automotive modelers I met along the way - 6 to 8. Some stayed and some left rather quickly and life took it toll also. PR is up to all of us and we have a harder time now than ever before due to the need for instant gratification that seems to be the norm today. Having recently moved to Hawaii, I was invited to an neighbor's BBQ to meet families in our neighborhood. During a conversation on history I asked the neighbor if he built models and found out the he and his oldest son had just begun doing just that. So I offered to be a resource for questions. That is how PR should be done - get out and ask. Have a nice day and build a model. David Von Almen, Gentleman Modeler (now in the islands)
  30. 2 points
    You could try to compare them visually with the new Foxbot set: More info HERE and HERE Regards, Aleksandar
  31. 2 points
    This was a bust I found on one of the announcement pages on FB. It's by Grimm. I tried looking for his info for this write up, but after an hr., I could find it. If I do I will make an edit and add it. The kit is one piece sculpt, very well done, in a gray resin - no bubbles, or seam marks. The figured reminded me of one of the villains in a Scooby-Doo cartoon, so decided to make him a ghost. Started with the black primer, and then was working on his navy colored coat. Then added a dark gray drybrush to the face, then added color to the barnicles, seeweed, and sweater. Another lighter gray - I want to make the glow coming from his face and OCL lighting on parts of the beard and coat. A little highlight to the coat and cap. I thought I took a pic of the ghostly glow, but didn't. The bluish,green glow color was made by drybrushing Citadel's Nihilakh Oxide where I needed it. I then highlighted that with V's Foundation White. I touch the Nihilakh Oxide and White to the rips in his coat to make it look like glow was coming out of them, and for a little added color. Thanks for looking.
  32. 2 points
    Finished the Saturn Knight. Additional images can be found here: MK44 SaturnKnight And I got the family together for the weekend.
  33. 2 points
    And yet again, when some low performing modeler berates one of our members with the painfully monotonous myth of IPMS rivet counters, our knee- jerk reaction is to rend our garments, beat our breasts, and fall on our xacto knives in shame. People will believe what they want to believe whether it is written on a bathroom stall wall or on the idiotnet. Nothing we can say or do will change that! Nor should we change. All IPMS has done over the past 50 years is give credibility to a hobby that was not taken seriously, help plastic modelers increase their skills and enhance their enjoyment of the hobby, demand that kit manufacturers take this hobby as seriously as we do and organize competitions that are as scrupulously fair as human integrity will permit! We have NOTHING to be ashamed of or apologize for. My personal experience of the people such as those whose uninformed comments you had to endure is that they are poor modelers whose work will not stand up under the most cursory of assessments. What we should be ignoring is the whining of these cry-babies whose skill level is so low that they are simply not competitive when faced with the standards of excellence that IPMS encourages and rewards in it’s members. Let’s all show a little more spine! Why should we seek an association with such narrow, hateful little minds? Regards, Nick Filippone, Senior National Judge
  34. 2 points
    Two models completed in one year so far!! WooHoo!! 😁
  35. 2 points
    Comments that are critical of ‘finding the flaws’ and ‘ignoring the bigger picture of what the model actually represents’ ( I don’t even know what that means) frustrate me as an experienced and scrupulously objective judge. As long as we as judges are required to identify three winners and X numbers of losers in a finite amount time, we will need a system that is efficient while also is able to be fairly applied to all entries. While theoretically you could compile all the things done correctly on each entry, that would be too time consuming. So efficient knowledgeable judges will start be looking for where most builders make common mistakes. These are craftsmanship competitions NOT an assessment of how much enthusiasm the modeler has for his or her subject. Likewise, the judges are not trying to answer the question: ‘What is the artist trying to say?’ In modeling contests, as in war, the winner is often the one who makes the fewest mistakes. There is a very simple way for the builder to get past this first cut of common faults. Read the Competition Handbook and do what it tells you to do. Despite this, the common errors appear with predictable frequency- admittedly more at the lower level shows than at the Nationals- but they are always there. Most categories will thankfully contain the gross misalignments, the wide-open seams, sloppy paint work, the silvered decals. Once these are out of the running, the really hard work in a 1,2,3 system begins. Now comes the necessary nit-picking. Now some of the virtues of a G,S,B system become apparent. But under either system, there are going to be disappointed entrants. If you do not want to be one of them, you have two choices: build better models or keep your models on the display-only table. Nick Filippone, Senior National Judge
  36. 2 points
    This week the Raptor build is moving forward with many details. To start with the kit does not come with any weapons so I purchased some Eduard Brassin AIM-9X and a few AIM-120’s to load up the weapons bays. I finished the main landing gear bay walls then moved on to the exhaust. The photo etch kit supplies the inside details of the exhaust. Once installed they were painted then weathered with pastel chalk. The top part of the fuselage is also the top of the main landing gear bays. I added the kit parts then detailed them with more wire and cable mounts. I turned to the intakes by painting them white and adding the decals. I like that the intakes assemble on the edges instead of the middle. Makes the intakes look seamless. Finally I assembled the fuselage halves together. This was a bit tricky especially around the intake openings. But once I got it lined up and some minor trimming they fit well. Will need some minor putty in a couple of areas to smooth out some minor gaps. The next step is to address the fuselage and some overly thick RAM panels. See all the photos and notes from the start at https://davidsscalemodels.com/build-log/1-48-f-22-raptor/
  37. 2 points
    Kudos for one of the Head Judges and NCC member for monitoring and stepping up to answer a rules question in a concise manner. This gives us an authoritative determination of the rule, as opposed to the rest of us offering our opinions. I hope more Head Judges follow this example! GIL
  38. 2 points
    It's now halfway through March and I'm finally able to post something finished. These are my two latest finished armor models . This first one is of the Military Wheels 1/72 scale Soviet SG-122. It's a 122mm cannon mounted on a PzIII chassis and hull and covered with a casemate. It was a stopgap project that only had a bout a hundred or so built before the SU-122 was accepted: The next one is the Trumpeter 1/72 scale Russian SA-6 Gainful. I made this as an East German machine that was repainted with the West German insignia after the German re-unification: My apologies for the poor pics. These look better in person. Well, that's all I have completed so far. Stay tuned, I have more to come.
  39. 2 points
    Here’s an original that I stripped and rebuilt as best I could, then re-painted.
  40. 2 points
    Let me now provide the history of the preparation of this ballot It began after last year’s National Contest with the annual forum debate on open judging (GSB) vs. 123. I joined the discussion and innocently made what I believed to be a practical suggestion: attach a simple tear-off ballot to the National Convention Contest registration form, deposit it in a box at the time of registration and add them up. That was rejected by the IPMS leadership, but, to their credit, they asked a working group of those interested in the question to create a ballot that would be included in an issue of the Journal so members could vote. I was one of the group, as was Rusty White. Again, to the credit of the leadership of IPMS, we were to be allowed to prepare the entire ballot. Our goal was to prepare a dispassionate, objective description of each system. It would be brief, fair, balanced and unemotional. At the beginning of the preparation of this ballot, I offered to write the initial description of our current 123 judging system for this ballot. However, Rusty White, who, from the start, had arrogated to himself the position of working group leader, rejected this offer and unilaterally decided to have someone from IPMS administration prepare the portion of the ballot that would describe the 123 system for the voters. I can only assume that Rusty decided that I, who he perceived as having some deep-seated and unalterable pro-123 bias, would somehow scupper the attempt to create a fair ballot. No one else in the group was allowed any input in this decision.There was never any question about the group’s other members being able to be objective about GSB open judging. I, however, was apparently not to be trusted to be fair. The irony is that I worked as hard as anyone in the group to prepare an accurate and fair description of open judging. We argued back and forth to create what you now see as the “position paper” for open judging. I insisted, as did others, that it take the form you now see. We wanted to provide basic facts and let the members decide. The Forum can provide the platform for debate and comment. We did not want that discussion to take place on the ballot. Then, without any warning or preparation from Rusty, the entire ballot suddenly appears as you see it. The working group was not permitted to sign off on it in it’s entirety. We never would have! And that is because the “position paper” for 123 was everything the group wanted to avoid. It is not brief or fair or balanced or unemotional! It is electioneering ON THE BALLOT by the very people who will be counting the votes. If I sound like I am whining, it is because I am. I am trained as a scientist. I want facts obtained honestly and objectively. I also have great respect for fairness in any vote. This ballot, as presently constituted, is not fair and should be seen as an embarrassment to this organization! I worked hard on this project. So did the others. We deserved the opportunity to produce something we could take some satisfaction in, regardless of the outcome of the vote. That opportunity was taken away from us by the very person in the working group who assumed the leadership position for himself and got out- manouvered. Please don’t blame me. Thank you. Regards, Nick Filippone, Senior National Judge.,
  41. 2 points
    I think what's interesting is that the 1-2-3 description actually is written as a NEGATIVE towards GSB! Here are some examples: 1) " Entries aren’t compared to any “ideal”, “perfect-model”, or “national-standards” criteria". Strictly speaking that's true, but they make it sound like having a standard to WIN an award (NOT enter the contest) is a bad thing. Every club that does GSB KNOWS that to be false! And there IS a Standard in GSB... Those same BASICS! 2) "Judges are your IPMS peers"... Seems to imply that GSB uses wizards or outsiders from the GSB galaxy to judge at those shows. Nope! Turns out it's ALSO your "IPMS peers"! 3) " Recording results for just the 600 winners now requires 8 staff, transcribing scoring from just 200 sheets of paper" (etc)...Implies that GSB judging would be IMPOSSIBLE at the Nats because of the logistics of how 1-2-3 is done. FAILS to point out that EVERY GSB system used or proposed does NOT use that 1-2-3 system of recording. IF GSB were ever to be used at a Nats, the system would be entirely different. 4) " How many ‘extras’ of each award level should a host chapter plan to order, ‘just in case’? Just one per category (200 more)? Two or more per category? 2,350 awards – just in case?" This next paragraph rightly points out the differences between the number of awards needed between the two systems. However, it WRONGLY implies that you could NEVER know how much you need! This is dealt with by EVERY GSB show in the nation EVERY year; so it IS something you can "learn". Would GSB be a "higher cost" system? YES! But then THAT is the crux of the debate: Should IPMSUSA look to reward MORE deserving builds than they do now? And with the profits that are being made, IPMS CAN afford to by some more awards! The debate, and the PURPOSE of this survey is to try to determine if the general membership thinks that's a good idea or not. 5) " Our convention attendees want a ‘contest’ "; THAT is a BLATANT assumption, and actually not true! There's enough of a question about that to lead to this survey being done! It also implies that GSB attendees aren't looking to "win" (as opposed to "contest" attendees). Baloney! GSB contestants want to win as MUCH as they can; they just prefer to do so while NOT "beating" anyone else, and (when they do win) not limit anyone else's ability to win. 6) " How many ‘For Display Only’ entries do you ever see at any of our conventions?" What has THAT to do with models in a CONTEST, be it GSB or 1-2-3? People who want to compete enter the show, be it GSB or 1-2-3. Those who prefer to display do that, no matter what format is being used there! 7) " Want to be the one of the few entrants not even good enough to earn a Bronze award – ‘not up to national standards’? MISLEADINGLY implies that a Standard that determines WINNERS (not the ability to enter the show) is somehow mean. Well, how does it feel in a 1-2-3 show to go home EMPTY HANDED and not knowing if you even made the cut? BOTH systems still have "losers"...but GSB will have FEWER "losers" than 1-2-3! 8- " Our contest results and awards are a fair recognition of our entrants’ outstanding model-making accomplishments" BLATANT BALONEY! In ANY 1-2-3 category with 10-25 entries at the Nats there are 7-22 that go home with NO idea of how they did!! There are HUNDREDS of outstandingly built models that go COMPLETELY unrecognized because the judges decide that there are 3 there THAT day that are "better". The "fair recognition" is ONLY truly fair for the top 3 winners! There's a LOT of advantages for 1-2-3 in IPMSUSA, and the system has some positives that make it preferable to many. There was NO need to write the above in such a negative way. Instead of touting the positives and advantages 1-2-3 offers IPMS members, it's written to PUT DOWN GSB. As the IPMS USA Chief Judge, I could understand if Mr. Persechetti wrote an enthusiastic support for 1-2-3. However, he chose to write it as a condemnation, and actually showed his ignorance of GSB in doing so. I'm greatly disappointed and disgusted with his lack of character and honesty in this matter! Gil
  42. 2 points
    Trumpeter KV-5 built as a BeutePanzer. Because why not. Needs some minor clean up before paint. Added lots of pieces from the spare bin or items I recently picked up at local shows. Lionroar tow cable ModelKasten clamps Tasca jerry cans with scrap PE bracket Aber tow loops for the Tiger 1 MIG productions resin tail light Copula, Notek, horn, etc from Dragon bits and pieces Still need to make the brackets to hold the spare wheels and tracks. A couple of color studies:
  43. 2 points
    Found a model of the Spook almost a year ago & finally finished it. The colors are not according to any scheme. If you do a google search, you'll even find him wrapped in a British flag & bowler. The blue is Tamiya Flat Blue; the cape & mask are Model Masters Gunship Gray; his hat band is Model Masters Light Gull Gray; and his hair is Tamiya rattle can primer. I mean, he's 57 years old. He has a right to gray hair. The glossy finish is Future or whatever they call it these days. Had to show that I could actually finish something even if it did only have 4 parts.😊
  44. 2 points
    Like all Air Force pilots of the era, T-38 was the fastest. Loved that bird. From there went to KC-135A's -- Big jets
  45. 2 points
    Just got the Tamiya engraving set. Stupid expensive at $30.00 a blade, but far and away the best panel line engraver I own and that is saying a lot. I have a drawer full of panel line scribes. The difference is that these give you a flat bottom with square sides and no ridges on the top. They are so expensive because they are tungsten carbide and are very sharp. Don't bother buying the special handle for them. They fit in a pin vice with the proper collet. I use my large Tamiya pin vice and really like it because it has a decent diameter and with the knurling it is easy to control the angle of the blade. As to the cost, well they are $30 from Tamiya but if you shop around and buy them all together(so you only pay one shipping fee) and they can be had for less than half that. Oh and although my photo shows all 4 blades they are only sold individually and each one comes with the case for all of them. Not sure why but that is the way it is.
  46. 2 points
    Seems I'm a broken record in this area with my Airfix locomotives. I get one a year and do them. Nice kits of interesting subjects and they are something different to build. This one is of a Battle of Britain Class locomotive used in the 50's and 60's. Each engine was named after a fighter base, or ace or something linked to the Battle of Britain. This one is the Biggin Hill, a fighter base around London. One quirk is that the name plate on the engine side should have an RAF blue background and not red. Other releases of the same kit have the blue, but I got 'lucky' and go the wrong color. The decals were old and yellow, so they spent sometime in a sunny window and then a coat of gloss coat to keep them from shattering.
  47. 2 points
    Real Life has kept me away from the workbench over the last 7 months, but more free time recently allowed me to finish the Accurate Mini kit of the Vindicator.
  48. 2 points
    I did find the Batmobile on eBay for a decent price. My local Hobby Lobby has listed the Tamiya Gama Goat for $12.49 on clearance. I bought two. They were regularly $49.99 so it was 75% off.
  49. 2 points
    Rusty says it best and I wish I could instill that attitude in all my model buddies. While I go to contests and enter models I no longer worry or care about not winning. I still chat and discuss when something wins that I feel shouldn't have (as all modelers tend to do). My theory or mentality is that if I win I was fortunate enough that 3 fellow model builders (hopefully) thought my entry was better than the others presented on that day and time. If I don't win.....Guess what? I will still build models to the best of my ability and will still enter contests until I can no longer build.
  50. 2 points
    Personally, I've never thought of them as smelling pleasant; just stronger or not so strong. And, I've always used enamels and lacquers which have the heaviest fumes. That said, I do have a "fondness" for the smell of paints, thinners, and glues; but I think it's simply because I associate them with the fun of model building; not with any direct olfactory stimulation. To paraphrase Robert Duvall in "Apocalypse Now"...."I love the smell of Dull Coat in the morning".... GIL
×
×
  • Create New...