Jump to content

All Activity

This stream auto-updates

  1. Yesterday
  2. Those are some very cool builds! I've always like the markings on that P-47B and the NMF on the XB-51 is sharp! Thanks for sharing! Gil
  3. Can't remember whether I posted all these or not, but some may find these interesting, and the build threads worth a look, for conversion lovers out there : First off, the Anigrand Curtis XP-60: A few more pics HERE.. Followed by a P-47B Double Twister conversion, using the 1/72 Academy P-47D kit: For those interested, the build thread is HERE.. Then, a P-47F conversion, with the laminar flow wing, also using the Academy P-47D kit: Build thread HERE.. Next up, one of my personal favorites, which I have seldom seen built, another conversion of the Academy kit, the P-47B: A few more pics HERE.. Next up, the Brengun A-36 Apache kit, but with so much work needed to make it accurate, it might as well have been a conversion: A LOT of detail changes and accuracy conversation HERE.. And last for the year, and one of my all-time favorites, the new 1/72 scale XB-51 bomber kit from Mikro Mir: Before starting one of these I would SERIOUSLY recommend that you read through the build thread (you'll see why) HERE.. Well, that's all. Not a lot for the year, compared to normal, but some fairly interesting ones, I think. Thanks, as always, for looking! Ed
  4. until

    Cancelled
  5. https://forms.office.com/r/NtNMUumtyK This is the link that gets you on the list for one of the 185 rooms at the new Embassy Suites 1/2 a block from the convention center. The Embassy set up this list and they will turn the list into reservations when their system is set up.
  6. A new set of 3D printed F-16 Fighting Falcon landing gear in 1/48th scale is provided by Detail & Wonder Studios for the Tamiya kit. This is a drop-in replacement for the Tamiya kit. Note: There is no official website for Detail & Wonder Studios, but a Facebook page is available. In The Package & Product Notes The sample review I received came in a small black box with tape stating “Test Set.” However, I did find on their Facebook page a box with the printed label. There are four (4) 3D printed parts, three (3) resin poured wheels, and bag containing a metal rod and tube. A bonus is an attractive photo etched metal placard for your F-16 to add to its base if so desired. View the full review
  7. Detail and Wonder (D&W) is a new aftermarket company; They currently list The F-35, F-4, and recently the F-16 as target kit improvements for their products, (Tamiya F-35A, Meng F-4E, and Tamiya F-16, which means it will work on the Kinetic copy) producing landing gear with integral Wheels/tires/struts, Exhaust Nozzles, and some intake/exhaust FOD (Foreign Object Damage) prevention plugs. The subject of this review is the F-35 Augmentor Exhaust and intake/exhaust plugs… IPMS USA is grateful to D&W for providing us this set to review! The packaging is frugal but effective; no parts breakage noted on my set, and opening them revealed one exhaust nozzle and three separate intake/exhaust plug parts encased in protective foam inserts to prevent movement and crushing. The printer resin is an almost-black color, and the wheels are medium gray. View the full review
  8. Last week
  9. Oh my, seems like that belongs in a museum of the Vietnam War or something, amazing.
  10. Just add to the give away the MONOGRAM 1/48 BF-109 and the SIERRA 1/48 RUSSIAN BI JET
  11. Arma Hobby has produced this kit for its tenth anniversary. Following the successes of its previous 1/48 scale Hurricanes (Mk IIc, Mk IIb, and now a Sea Hurricane Mk IIc), this “Anniversary Special Edition” Mk IIc comes with new parts. The Hurricane Mk IIc differs from the Mk IIb with the armament being four 20mm Hispano cannons instead of twelve .303 Browning machine guns. From the Arma Hobby Website:At the beginning of November, Arma Hobby celebrates its 10th anniversary! On this occasion, for modelers, we have prepared a special, jam-packed anniversary model kit - Hurricane IIC "Jubilee" in 1/48 scale. View the full review
  12. 3D basics: I really fell down the rabbit hole in this respect and very quickly found a whole bunch of information about the ‘art’ of 3D printing and other basics. While I can’t say I’ve mastered anything, I suggest that you consider these URLs as a jumping off point: Tom's 3D for basic information, Plugnplay3D, and 3D Printer Anatomy: 50 parts in 5 minutes (Basics). View the full review
  13. Most likely in my mancave.
  14. Very ice! I can't see anywhere that you had issues! That is a sign of a conscientious and masterful modeler! Way to go!
  15. What an incredible build. Where will you be displaying this masterpiece after the convention?
  16. The level of realism you're achieving is mind blowing! Really enjoying this build! Gil
  17. In my quest to build kits that I have been trying to avoid (due to complicated assembly, size, etc.), I dug out the 1/10th scale Bandai “ISS Space Suit” kit. I bought this at an IPMS Nats in 2012 and knew it was articulated and would require a lot of filler and putty to eliminate the “toy” look. I filled in all the movable joints with Apoxie Sculpt and I think it came out pretty nice. I have videos of the build here: https://youtu.be/GQwVegq4TwE.
  18. For the sixth week of the CH-46 project I began detailing the bulkheads between the crew/cargo area and the cockpit. Starting with the cargo area bulkhead I cut open the panels to replicate the ref photos. I used some scrap photo etch pieces to create the panels. I then adding the cables for the avionics on the left side and ran the cables and hydraulic lines on the right side. Just to note the wiring for the upper LED’s will route thru the right side as well once I start hooking all the wires together. In the reference photo there is a folding jump seat by the doorway. I scratch built the seat frame, mount, and support rods out of styrene tubing and then used the 3M glass tape for the seat cloth. Finally, I made a decal for the warning sign on the left. For the cockpit bulkhead I used the 3M glass tape on the panel which was then painted with green drab and then olive drab to give it some color depth. The panels were then mounted to the floor. Next I began the work on the cockpit instrument. I sanded down the face and removed the shroud. I then needed to modify the backside by removing the supports just behind the panel so I can fit the three LED’s and drill out the holes for the gauges. I then scanned the Eduard panels for the gauges and instrument panel into my PC and made a guide for drilling the holes and also make a decal for the gauge faces. The guide for the holes was then taped to the face of the kit instrument panel and I used drills that matched the gauge sizes. With the holes drilled I covered the face of the instrument panel with a 0.001 sheet of white styrene. The photo etch instrument panel was held onto the panel face and checked to make sure the holes lined up with the panel. To keep the gauges from having bright spots due to the LED’s I mounted them facing to the rear. The rear panel I will be making being white will diffuse the light so all the gauges have the same brightness once the instrument panel is finished. I am now working on finishing the instrument panel then I will finish off the cockpit with the detailed seats, control sticks, and pedals. I then need to make the mount on the nose of the cockpit to hold the twin landing lights that shine thru the nose. You can see more photos and details of this build from the start in the build log at: https://davidsscalemodels.com/build-log/1-48-ch-46a-d-helicopter/
  19. WEEK # 11 advance ! Enjoy ! Jmarc # 1..LOCKHEED EC-130V HERCULE (ITALIERIE/TESTOR + MODIFICATION MAISON) Lien Google du montage complet du project... https://goo.gl/photos/jxfUh5Muw34MqsRY7 (MAR 22) Cette semaine j'ai perdu les roues avant dans le transport que je vais recoller seulement lors que je ferais les réservoirs sous les ailes ! # 8 EXTINCTEUR DE PISTE (SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/YHfjVRvXSVpZhAQs5 Si vous désirez voir le projet complet visiter ce lien Google: https://photos.app.goo.gl/54ajt7XitSyLJtyt5 (MAR 22) Cette semaine j'ai fait les dernier détailles et le projet es compléter ! # 26 BOEING X-20 DYNA-SOAR (COLLECT-AIR + MODIFICATION) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/Fm7KhpkxPh9sV2ou9 (MAR 22) Cette semaine j'ai fait la structure du contour de l'intérieure de l'aile ! # 27 WESTLAND WASP et SCOUT (FUJIMI +MODIFICATION) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/VU21aeXKGvcLE2UG6 (MAR 22) Cette semaine j'ai terminer les dessus du tableau de contrôle avant er rajouter du détaille dans la section arrière des 2 versions ! #32 M.101 155mm HOWITHZER (REVELL + MODOFICATION) Si vous désirez voir le montage intégrale de ca projet ,visitez ce lien Google https://photos.app.goo.gl/LrBBg2sDbBqN2yJ99 (MAR 22) Cette semaine j'ai terminer les bouclier avant et les es coller en place des 2 versions ! #33 SOUS-MARIN ALLEMAND TYPE VIIc (trumpeter + additions) Si vous désirez voir le montage intégrale de ca projet ,visitez ce lien Google https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 (MAR 22) Cette semaine j'ai terminer le panier et l'es coller en place , aussi coller le canon et débuter le travaille sur les pattes qui retiens le canon en place finalement continuer le contour de la section transparente ! #34 TRANSPORTEUR DE MOTEUR (scratch) Si vous désirez voir le montage intégrale de ca projet ,visitez ce lien Google https://photos.app.goo.gl/2rEMigVsfmST9NMS8 (MAR 22) Cette semaine j'ai fouiller dans mes filière de photos et j'ai trouver un nouveau type , J'ai donc monté la structure de base ! #36 Petit accessoire de piste ..TRÉTEAUX de délimitation ... (SCRATCH) Si vous désirez voir PLUS ,visitez ce lien Google https://photos.app.goo.gl/mzzBBq5WxJKEVh1v9 Si vous désirez voir l'intégrale de tout ls projet fabriquer a date , visiter ce lien Google : https://photos.app.goo.gl/8h1ExuE1BfxczTHP9 (MAR 22) Cette semaine j'ai fait les dernier détaille et le projet es compléter ! #41 TRANSPORTEUR DE BOMBE X 4 (KINETIC + RAJOUT ) Si vous désirez voir le montage intégrale de ca projet ,visitez ce lien Google https://photos.app.goo.gl/Mnv6LJMmgDHH3epK8 (MAR 22) Cette semaine j'ai débuter le travaille sur les support de missiles ! #48 MACROSS VF-1S/A (HASEGAWA + ADDITION et MODIFICATION) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/jEtQtXgwPi8L8RVf9 (MAR 22) Cette semaine j'ai continuer le travaille sur l'arrière du poste de pilotage ! #49 DASSAULT FALCON 10 et 20 (HASEGAWA / HELLER + ADDITION et MODIFICATION) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/LqMrp3hZ9m3EHhUT7 (MAR 22) Cette semaine j'ai peint l'intérieure de la version 10 , et continuer l'assemblage du fuselage côté droit de la version 20 ! #55 BOMBE NUCLÉAIRE 'FAT ALBERT' de l'USAF (MONOGRAM + MODIFICATION ) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/oWEoYYJaWJ3QkANj6 (MAR 22) Cette semaine j'ai sabler le travaille fait la dernière fois et continuer les détaille de la section arrière ! #69 KOSCH ORNITHOPTER ( SCRATCH + ADDITIONS ) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/ZRBi2xb6B2eE77JE7 (MAR 22) Cette semaine j'ai terminer les détaille de présentation et les es coller sur la base ! Now on the CANADIAN SIDE .. # 1 .....Muck-up de bois du ARROW MACH 2 (HOBBYCRAFT + MODIFICATION MAISON) si vous désirez voir le montage intégrale de ce project visitez ce lien Google: https://goo.gl/photos/jXeQLJioaoky58HR9 (MAR 22) Cette semaine j'ai continuer le travaille sur les structure intérieure de la baie des missiles ! # 2 .....Le BOMARC IM-99B et sont HANGAR de lancement (project REVELL + MODIFICATION +scratch) si vous désirez voir le montage intégrale de ce PROJECT visitez ce lien Google: https://goo.gl/photos/q4rxkYiwrrbd8Tmi8 (MAR 22 Cette semaine j'ai peint la section arrière du missile ,couvert les point d'attache des moteur vue qu'il vont être déplacer vers l'avant et terminer les moteurs et donner une autre couche de peinture ! 3...JIG D'ASSEMBLAGE DU AVRO CF-105 ARROW (PROJECT SCRATCH) Voici le lien Google pour le montage complet du projet (c'es la phase 2) https://goo.gl/photos/d6TczBBAmLeLeeGRA (MAR 22) Cette semaine j'ai continuer le travaille sur la structure du jig d'assemblage des trains principale ! # 4 MOULE MAÎTRESSE de la section extérieure des ailes (kITBASHING +SCRATCH ) si vous désirez voir le montage intégrale de ce project visitez ce lien Google ' Phase 3 ': https://photos.app.goo.gl/3pBpv8FH0OhzQalQ2 (MAR 22) Cette semaine j'ai terminer la structure principale , donner une couche de peinture et débuter le remplissage des section du bas ! # 6 AVRO C.102 JETLINER (SCRATCH) si vous désirez voir le montage intégrale de ce project visitez ce lien Google : https://photos.app.goo.gl/SSUPC36bfWrhiRwF8 (MAR 22) Cette semaine j'ai terminer l'engravure de la section de queue et du gouvernail de directiont ! # 08 Site d'information du CF-105 ARROW ( SCRATCH) si vous désirez voir le montage intégrale de ce project visitez ce lien Google https://photos.app.goo.gl/3n8AXR62ufi2hADi6 (MAR 22) Cette semaine j'ai continuer le travaille sur la structure du chariot explicatif du SPARROW ! # 16 AILES du CF-105 'RL-205' EN DÉMONTAGE CHEZ AVRO CANADA (HOBBYCRAFT + SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/1TVjeJLmC4Zxcekd6 (MAR 22) Cette semaine j'ai débuter certains détaille qui vont être présenter sur le diorama ! #18 SITE D'ESSAIS du moteur 'VIPER' du SILVERBUG ( SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/wiKtW8PyBEx831aL6 (MAR 22) Cette semaine j'ai sabler le travaille fait la dernière fois et donner une couche de primeur sur le SILVER BUG ! #19 Les 'STATION' structure principale du AVRO CF-105 ARROW MK,I ( SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/rx4JcTPCfuWqhRV63 (MAR 22) Cette semaine j'ai fait le salissage du JIG et fait les renfort sur l'autre côté de la station ! #22 AVRO CF-105 'ZERO LENGHT' PROPOSAL ( SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/JtRXcr2nKibSA1We7 (MAR 22) Cette semaine j'ai continuer le travaille de détail des rampes de la section principale ! #24 SITE D'ESSAIE DES MOTEURS ( SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/oNJ4NqqZncq4TfQE8 (MAR 22) Cette semaine j'ai j'ai terminer les structure extérieure de la 2ième tours ! #25 SIMULATEUR DE VOL DU AVROCAR ( SCRATCH) Si vous désirez voir le montage intégrale visitez ce lien Google https://photos.app.goo.gl/XzqrWzfioCSXqxhQ9 (MAR 22) Cette semaine j'ai débuter le travaille sur la console de gauche et fait la base de la section arrière !
  20. AAAAAAAAAAAHH RIGHT ! Very inspiring visit to the hangar, lots of neat and large stuff you are working on ,RB-66 is almost true Neat .. and wow , what to say about the ROBERT E. LEE will soon be braking champagne Great advance and looking forward for your next one ..GO,GO,GOOOOO
  1. Load more activity
×
×
  • Create New...